| NO. | Brand | Compatible P/N | Remarks |
| 1 | Cisco | SFP-10G-ZR | |
| 2 | Cisco | SFP-10G-ZR-S | |
| 3 | Alcatel-Lucent | SFP-10G-ZR | |
| 4 | Arista Networks | SFP-10G-ZR | |
| 5 | Huawei | SFP-10G-ZR | |
| 6 | Brocade | 10G-SFPP-ZR | |
| 7 | HPE(H3C) | SFP-10G-ZR | |
| 8 | Cisco Meraki | MA-SFP-10GB-ZR | |
| 9 | Juniper Networks | EX-SFP-10GE-ZR |
10G SFP+ ZR Optical Transceiver Module Compatible HPE(H3C) SFP-10G--ZR (10GBASE-ZR, SMF, 1550nm, 80km, LC, DOM) | HYTOPTODEVICE
HYTOPTODEVICE SFP-10G-ZR compatible HPE(H3C) is a high-performance,hot-pluggable 10GBASE-ZR SFP+ optical transceiver. It supports high-speed 10Gbps data transmission up to 80 kilometers (49.7 miles) over LC Duplex Connector with Single Mode Fiber(SMF). Integrating a cooled EML transmitter and a high-sensitivity APD receiver, this hpe 10gbase-zr optic replacement is specifically designed for high-performance enterprise campus backbones, data center interconnects (DCI), and long-haul 10-Gigabit Ethernet links. Compliant with both SFP+MSA and IEEE 802.3ae, SFF-8472, SFF-8431, SFF-8432. With low latency and low power consumption, the HPE sfp+ 80km single mode transceiver is ideal for data center, 10G Ethernet and Fibre Channel etc.
Key Technical Specifications of 10G SFP+ ZR
| HPE(H3C) Compatible | SFP-10G-ZR | Vendor Name | HYTOPTODEVICE |
| Form Factor | SFP+ | Max Data Rate | 10.7Gbps |
| Wavelength | 1550nm | Maxmum Transmission Distance | 80km |
| Connector | Duplex LC | Transmitter Type | 1550nm EML |
| Cable Type | SMF | Receiver Type | APD |
| TX Power | 0~+4.5dBm | Receiver Sensitivity | < -23.0dBm |
| Power Consumption | ≤1.5W | Operation Temperature | 0 to 70°C (32 to 158°F) |
Full Compatibility List and Supported Devices of Compatible HPE(H3C) 10G SFP+ ZR
One of the biggest advantages of HYTOPTODEVICE compatible optical module is the full brand compatibility.Featuring stable plug-and-play performance for 10G Network Switches and industrial standard Compliance for Enterprise-Grade Networks. It helps enterprises cut hardware costs without sacrificing performance. Worried about compatibility? Don't be.hardware verified compability with Cisco,Huawei,Arista,Juniper. We deliver verified results on real module,real hardware. Video proof available upon request. Our long-haul network transceiver is fully tested and certified to work seamlessly with the following HPE(H3C) equipments:
HPE FlexFabric Data Center Switches: 5900, 5930, 5940, 5950, and 12900 Series.
HPE FlexNetwork Campus Switches: 5510 HI, 5800, 7500, and 10500 Modular Switch Series.
H3C CloudEngine / S-Series Switches: S5820V2, S6800, S6820, S9800, and S12500 Series data center switches.
H3C Enterprise Routers: SR6600, MSR 3600, and MSR 5600 Series.
Aruba/HPE Campus Switches: Aruba 3810M, 5400R zl2, and older HPE 2920 Series (utilizing appropriate 10G uplink modules).
Enterprise Campus Backbone Infrastructure: Interconnecting geographically dispersed corporate office buildings or broad university campuses up to 80km apart.
Metropolitan Area Network (MAN) Ring Aggregation: Deploying high-speed 10G links across municipal environments for utility, government, or educational networks.
Data Center Interconnect (DCI): Linking primary private data storage arrays with remote off-site cloud replication facilities for immediate disaster recovery.
Service Provider Edge Aggregation: Facilitating long-haul transport paths from regional network distribution facilities directly to enterprise edge boundaries.
Technical Warning: When testing or deploying this SFP-10G-ZR 80km module over short distances (typically less than 30km), an optical attenuator (12dB to 15dB) must be used. Failure to attenuate the signal may cause permanent damage to the receiver due to optical overload.
Q1: Will Comware display an "Uncertified Transceiver" log alarm when I plug this in?
A1: No. HYTOPTODEVICE 10G ZR modules are written with correct checksum values and vendor descriptors so that HPE Comware platforms identify them as certified options, eliminating annoying CLI log traps.
Q2:Can I test this 80km ZR module over a short 5-meter fiber cord in my lab?
A2: Absolutely not without an inline optical attenuator. The high-gain APD receiver inside this module is intensely sensitive. A direct short loop will permanently blind or burn out the optical sensor.
Q3: What is the minimum optical loss or distance needed before patching directly?
A3: You must maintain at least 14dB to 15dB of physical optical loss (roughly equivalent to 40km of continuous fiber). For any loop or link span shorter than this, an external 10dB or 15dB fixed LC optical attenuator must be positioned on the RX line.
Q4: Will using this Third party H3C 10GZR module affect my HPE(H3C) technical support or warranty?
A4: No. Standard consumer protection laws prevent OEMs from voiding system warranties for using compatible hardware components. If a port troubleshooting case arises, support may simply ask you to swap optics to isolate the root cause.
Q5: Can I test HYTOPTODEVICE 1550nm single mode 10g sfp+ h3c with only 3m short patch fiber directly without accessories?
A5: Never direct short-loop testing on HYTOPTODEVICE 80km long-haul optical transceivers unless an inline fixed optical attenuator is equipped. Equipped with high-gain APD receiver customized for long-distance SMF transmission, our 10G ZR SFP+ gets overloaded instantly by excessive optical power on 3-meter short fiber jumper, which causes temporary receiver blinding or irreversible permanent hardware damage to the transceiver component.
Q6: What minimum fiber distance or optical attenuation is needed to hot-plug HYTOPTODEVICE 10G ZR SFP+ without external attenuator?
A6: Direct plug-in requires minimum 15dB total optical loss, corresponding to approx 40~50km standard single-mode fiber. All test links shorter than this standard span must be fitted with LC-type 10dB or 15dB fixed inline optical attenuator to protect HYTOPTODEVICE long-reach SFP+ transceivers from over-power burnout, a standard lab test specification for data center network engineers.
Q7: Does this component comply with global environmental safety codes?
A7: Yes, it satisfies all current RoHS directives, holds CE clearance, and is fully FCC certified.
Q8: Is HYTOPTODEVICE 10GBASE-ZR high speed transceiver interoperable with Multi-Mode Fiber MMF cable?
A8: Not applicable. HYTOPTODEVICE 10GBASE-ZR SFP+ ZR module is engineered exclusively for standard 9/125µm Single-Mode Fiber(SMF), incompatible with OM1/OM2/OM3 multi-mode fiber infrastructure for enterprise cabling deployment.
Why Network Engineers Choose HYTOPTODEVICE
HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP+ modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia
Quality Certification & Compliance
At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.
We adhere to rigorous standards for our SFP modules and network solutions:
ISO 9001: Certified quality management and production consistency.
CE & FCC: Fully compliant for seamless Global Market Access.
RoHS: Committed to environmental responsibility and hazardous material control.
Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.
Certified Quality. Global Standards. Guaranteed Performance.
