Cisco SFP-10G-LR Compatible 10G SFP+ LR Optical Transceiver From Top Supplier |1310nm 10km SMF Bulk Wholesale HYTOPTODEVICE
Product Overview
Looking for stable Cisco SFP-10G-LR compatible 10G SFP+ LR transceiver for long-distance single-mode fiber links? As a professional cisco sfp-10g-lr supplier, HYTOPTODEVICE provides drop-in replacement SFP+ modules matching SFP-10G-LR specification. Operating at 1310nm, this 10GBASE-LR optical module reaches 10km over OS2 single-mode fiber. Built-in DDM/DOM supports real-time optical parameter monitoring, pre-programmed EEPROM ensures seamless plug-and-play without Cisco port alarms. Every SFP-10G-LR module passes full optical testing before delivery. We offer bulk supply, sample testing, custom EEPROM and private label service for system integrators, network distributors and enterprise buyers searching for dependable cisco sfp-10g-lr supplier.
Key Technical Specifications
| Cisco Compatible |
SFP-10G-LR |
Vendor Name |
HYTOPTODEVICE |
| Form Factor |
SFP+ |
Max Data Rate |
10.7Gbps |
| Wavelength |
1310nm |
Max Distance |
10km |
| Connector |
Duplex LC |
Transmitter Type |
1310nm DFB |
| Cable Type |
OS2 SMF |
Receiver Type |
PIN |
| TX Power |
-6.5~-0.5dBm |
Receiver Sensitivity |
< -14.4dBm |
| Power Consumption |
≤1W |
Operation Temperature |
0 to 70°C (32 to 158°F) |
For detailed technical specifications, please refer to the Datasheet
Here is a Guide About the Difference Between SFP-10G-LR and SFP-10G-LR-S, SFP-10G-LR-X
Usage Guidelines & Best Practices
-
Fiber Choice: OS1/OS2 single-mode fiber (9/125 µm) is correct. Standard duplex LC-LC connectors are standard. Do NOT use OM1/OM2/OM3/OM4 Multimode Fiber (MMF) cables; severe modal dispersion will prevent link establishment.
-
Connector Match: Clarify that UPC/PC is required for proper optical contact, while APC will result in an unusable link and excessive signal loss.
-
Cleanliness & Dust: Keep dust caps on whenever unattached. Clean fiber end-faces with a optical cleaning pen before insertion; dust causes over 80% of optical link failures.
-
Link Tuning: If auto-negotiation fails with legacy SAN switches, manually lock the port speed to 10Gbps
-
Handling: Wear an ESD wrist strap during installation. Maintain a minimum fiber bend radius of 30 mm to prevent micro-bends and optical power loss.
-
Installation & Hot-Swap Rules
Supports MSA-compliant hot-swapping. Insert/remove gently without powering down the device. Keep dust caps on unused LC ports and avoid frequent re-plugging.
-
Operating Environment
Commercial grade: 0°C to 70°C in indoor environments. Keep away from extreme heat, moisture, and dust for long-term stability.
For detailed operation instructions, please refer to the User Guide.
Full Compatibility List and Supported Devices
1. Supported Hardware & Firmware
• Cisco Nexus 3000 / 5000 / 6000 / 7000 / 9000 Series Switches
• Cisco Catalyst 3650 / 3850 / 9200 / 9300 / 9500 Series Switches
• Cisco ISR 4000 Series Integrated Services Routers
• Cisco ASR 1000 Series Aggregation Services Routers
• Cisco ASA 5500 Series Firewalls
• Cisco Firepower 4100 / 9300 Series Firewalls
• Cisco UCS C-Series / B-Series Servers with SFP+ NIC
Minimum supported firmware: Cisco IOS / NX-OS stable release
2. Multi-Brand Cross Compatibility
This SFP-10G-LR compatible transceiver also works on Arista, Juniper, H3C, Dell and other mainstream SFP+ ports for mixed-brand network deployment when you source from our reliable cisco sfp-10g-lr supplier.
3. Free Value-Added Services
-
Custom firmware for multi-device compatibility
-
Support sample testing before bulk orders
-
Complete test reports for project acceptance
-
Strict batch consistency quality control
- Free custom EEPROM programming for special and legacy network environments
- Free EEPROM Compatibility Re-flashing (Tools Included) with 24/7 Tech Support
Main Application Scenarios
• 10G long-distance fiber uplink for Cisco Nexus and Catalyst switches
• Inter-building campus fiber connection and metropolitan rack interconnection
• Enterprise backbone 10G single-mode fiber networking
• Data center remote disaster recovery and cross-site SAN links
• Bulk supply of Cisco compatible SFP-10G-LR transceiver for global buyers via our cisco sfp-10g-lr supplier
Connectivity Solutions(Applications)
1.10GbE Switch-to-Switch Connectivity

2.10GbE Switch to Media Converter Connectivity
3.10GbE Structured Cabling Interconnect

4.10GbE Switch-to-NIC Interconnection

5.10G Switch-to-4x10G Switch Interconnection

The Core Feature
1. 10G High-Speed Connectivity for Data Centers
Featuring 1W low power consumption, high density, and support for up to 10km transmission over single-mode fiber, this 10G SFP+ LR optical transceiver offers an efficient, reliable solution for upgrading your network infrastructure.
2.Seamless Compatibility & Reliability
Every unit undergoes rigorous compatibility testing across our lab's
150+ brand host devices to ensure seamless, flawless operation. Check device compatibility using our online tool, or request a switch-specific
Compatibility Video.
FAQ
Q1: What are the core distinctions between Cisco SFP-10G-LR and SFP-10G-LR-S optical transceivers?
A: These two 10G single-mode transceivers share identical transmission speed and 10km coverage range, while they differ greatly in applicable scenarios. The original SFP-10G-LR is a multi-functional optical module that can adapt to multiple network protocols, covering common Ethernet, WAN Phy as well as OTN optical transmission network systems. In contrast, the upgraded S-Class SFP-10G-LR-S is a cost-effective simplified version, which is exclusively engineered for conventional Ethernet enterprise network environments to cut unnecessary costs for users with basic networking demands. Bulk and long-term supply available for these two compatible modules from HYTOPTODEVICE.
Q2: How far can the SFP-10G-LR optical module transmit data?
A: When paired with standard single-mode optical fiber, the 10GBASE-LR SFP-10G-LR transceiver can achieve a stable transmission distance up to 10 kilometers (6.2 miles). This specification meets the deployment demands of medium-range data transmission for enterprise data centers and campus networks.
Q3: Why does my switch show "Unsupported Transceiver" upon insertion?
A: This alarm indicates host device rejects module EEPROM profile. Cisco IOS/NX-OS switches perform strict vendor‑specific EEPROM validation; generic MSA firmware will trigger alert even if optical hardware works normally. Use our pre‑flashed Cisco‑SFP‑10G‑LR customized EEPROM version for zero‑alarm operation; avoid permanent CLI alarm‑masking on production backbone fabrics and upgrade switch firmware to latest stable release for your order from our cisco sfp-10g-lr supplier.
Q4: Can I link an SFP‑10G‑LR to a 10GBASE‑T (copper RJ45) port?
A: NO. Direct interconnection is not feasible. SFP‑10G‑LR is optical single-mode 1310nm transceiver while 10GBASE‑T is electrical copper signal; signal types are fundamentally different with no native conversion. Deploy a media converter or SFP‑10G‑T copper module to bridge optical LR link and RJ45 copper port for cross‑media interconnection scenarios using our Cisco 10G LR optics.
Q5: Will this module work in Network Interface Cards (NICs) like Intel or Broadcom?
A: YES. This SFP+ 10G LR follows SFP+ MSA hardware specification and works with most SFP+‑based Intel X710, X520 and Broadcom NetXtreme series NICs. Some NIC firmware locks to original branded optics; select our generic MSA firmware variant for third‑party NIC hardware and confirm NIC firmware version before bulk server cluster deployment for Cisco fabrics with our cisco sfp-10g-lr supplier modules.
Q6: Which fiber patch cord matches the SFP-10G-LR transceiver for network deployment?
A: This 10G single-mode transceiver needs to work with duplex LC-to-LC single-mode fiber patch cables. To maximize transmission efficiency and ensure stable signal quality within the 10km transmission limit, we strongly recommend adopting OS2-grade 9/125µm single-mode fiber cables for formal project deployment.
Q7: Is it possible for the Cisco SFP-10G-LR module to run at lower bandwidth such as 1Gbps or 100Mbps?
A: It is not supported. The SFP-10G-LR belongs to a fixed-rate optical transceiver, which is locked at 10Gbps operating bandwidth. This hardware design does not support automatic speed downgrade and negotiation, so it cannot adapt to low-speed network links of 1G or 100Mbps
Q8: How does HYTOPTODEVICE Cisco SFP-10G-LR compare to original OEM modules in performance and cost?
A: HYTOPTODEVICE Cisco SFP-10G-LR compatible modules deliver identical optical and electrical performance to original OEM transceivers, including 10.3125Gbps 10GBASE-LR, 1310nm DFB laser and 10km OS2 SMF reach. Pre-flashed with Cisco-matched EEPROM for zero-alarm plug-and-play, they cost over 70% less than genuine Cisco modules while maintaining the same reliability and compatibility for bulk enterprise deployment.
Q9: What is the operating temperature range for Cisco SFP-10G-LR compatible modules?
A: HYTOPTODEVICE Cisco SFP-10G-LR compatible transceivers support a standard commercial operating temperature range of 0°C to 70°C, suitable for typical data center and enterprise office environments. Industrial temperature grade (-40°C to 85°C) is also available upon request for outdoor cabinets, factory floors and other harsh environment deployments.
Q10: Is the Cisco SFP-10G-LR compatible transceiver hot-swappable without powering down the switch?
A: Yes. HYTOPTODEVICE Cisco SFP-10G-LR modules use the standard SFP+ form factor with full hot-plug capability, allowing safe installation and removal while the Cisco switch remains powered on and operational. This minimizes network downtime during maintenance, upgrades and replacements in high-availability enterprise environments.
Q11: What line coding does 10GBASE-LR use at the physical layer for SFP-10G-LR?
A: HYTOPTODEVICE Cisco SFP-10G-LR modules implement 64B/66B line coding at the physical layer as defined by IEEE 802.3ae, with a serial bit rate of 10.3125Gbps over 1310nm single-mode fiber. This efficient coding scheme ensures low overhead, reliable clock recovery and stable long-reach 10G Ethernet transmission up to 10km on OS2 SMF.
Q12: Can I mix HYTOPTODEVICE Cisco SFP-10G-LR with other brand 10GBASE-LR modules on the same link?
A: Yes. HYTOPTODEVICE Cisco SFP-10G-LR modules are fully MSA and IEEE 802.3ae compliant, ensuring standard-based interoperability with any other vendor's 10GBASE-LR transceiver at the optical layer. As long as both ends use 1310nm single-mode 10GBASE-LR modules with matched parameters, the link will establish reliably regardless of hardware brand.
Q13: What warranty and technical support does HYTOPTODEVICE provide for Cisco SFP-10G-LR compatible modules?
A: HYTOPTODEVICE provides a 5-year product warranty for all Cisco SFP-10G-LR compatible modules, covering manufacturing defects and performance failures. Our 15+ year technical team offers free remote EEPROM coding, pre-sales compatibility consultation, test video verification and after-sales troubleshooting to ensure smooth deployment and long-term stable operation for every bulk order.
Q14: How to verify Cisco SFP-10G-LR compatibility and real-time optical parameters via Cisco switch CLI?
A: On Cisco Catalyst and Nexus switches, use the `show interface transceiver` command to verify HYTOPTODEVICE Cisco SFP-10G-LR module recognition and view real-time DDM data including temperature, supply voltage, Tx bias current, Tx output power and Rx received power. The `show interface transceiver detail` command provides additional threshold and alarm information for comprehensive optical link diagnostics.
Q15: What is the lead time and minimum order quantity for bulk wholesale Cisco SFP-10G-LR compatible modules?
A: HYTOPTODEVICE maintains large ready stock of Cisco SFP-10G-LR compatible modules for immediate shipment. Standard bulk orders typically ship within 3-5 business days, with a low minimum order quantity starting from sample-level quantities. Custom EEPROM coding, industrial temperature grading and private label packaging are available for larger volume orders, with lead time adjusted based on customization scope.
Q16: Does HYTOPTODEVICE offer industrial temperature grade Cisco SFP-10G-LR modules for harsh environments?
A: Yes. HYTOPTODEVICE offers industrial temperature grade Cisco SFP-10G-LR compatible modules rated for -40°C to 85°C operation, built with enhanced thermal design, ruggedized components and extended aging testing. These industrial-grade 1310nm DFB 10G SFP+ LR modules deliver stable 10km transmission in outdoor telecom cabinets, industrial automation networks, transportation systems and other extreme temperature environments.
Packaging & Custom OEM Solutions
Our 10G SFP+ LR module comes sealed in standard anti-static (ESD-safe) packaging, pre-stocked and ready for immediate shipment. For bulk orders, we offer custom OEM packaging—including logo printing and private labeling—tailored for network distributors, system integrators, and enterprise deployments.

Why Network Engineers Choose HYTOPTODEVICE
HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
- 100% MSA-compliant modules with Cisco, Huawei,Dell,Juniper, and Arista compatibility
- ISO 9001:2015 certified manufacturing facility in Shenzhen
- Average lead time of 3–5 business days with DHL/FedEx express options
- Dedicated pre-sales engineering support for custom configurations
- Actual hardware,actual switches,actual results.we publish compatibility test video,eliminate compatibility anxiety. you can watch before you buy.
- We can provide inspection and shipping videos to make you feel as if you are right here with the product.
- Private Label support - EEPROM / firmware customization support
“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP+ modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia
Quality Certification & Compliance
At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.
We adhere to rigorous standards for our SFP modules and network solutions:
-
ISO 9001: Certified quality management and production consistency.
-
CE & FCC: Fully compliant for seamless Global Market Access.
-
RoHS: Committed to environmental responsibility and hazardous material control.
-
Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.
Certified Quality. Global Standards. Guaranteed Performance.

Rigorous Industrial Product Testing

100% 3rd Party Compatible

Partial Test Demonstration

Others


