HYTOPTODEVICE 1000BASE-LX optical module is fully pin-to-pin compatible with Arista SFP-1G-LX, solving common pain points of third-party optical module unrecognized errors and system alarm logs on Arista data center and enterprise switches. Compliant with IEEE 802.3z and SFP MSA standards, this commercial-grade optical module delivers stable 1.25Gbps long-distance fiber transmission.
Pre-flashed with dedicated Arista adaptive firmware, this plug-and-play optical module passes official device verification. It eliminates typical optical module compatibility faults including port down, error log popping up and DDM data failure caused by generic coding mismatch.
Equipped with high-precision 1310nm FP laser, this optical module supports error-free 10KM transmission over standard G.652 single-mode fiber. Every module passes strict factory aging and real Arista device testing to avoid optical module performance attenuation and unstable links in long-term bulk operation
A: The core difference lies in wavelength, fiber type and transmission distance. This 1.25G LX optical module adopts 1310nm wavelength for 10km single-mode fiber transmission, while SX modules use 850nm wavelength only for short-distance multimode fiber links, solving wavelength mismatch interconnection faults.
Q2: Why does my switch report an "Unsupported Transceiver" error?
A: The error is mainly caused by mismatched EEPROM coding and OEM verification rules. Our Arista compatible optical module is pre-flashed with dedicated firmware to fix third-party unsupported transceiver errors and eliminate system alarm logs.
Q3: What is the maximum transmission distance for a 1.25G 1310nm LX module?
A: This 1.25G 1310nm LX optical module supports a maximum stable transmission distance of 10km over standard G.652 single-mode fiber, solving long-distance link attenuation and signal loss faults in cross-building network deployment.
Q4: Do I need a Mode Conditioning Patch cable for Single-Mode Fiber links?
A: No. Mode conditioning patch cables are only required for multimode fiber long-distance transmission. Standard single-mode fiber links using this LX optical module do not need extra mode conditioning cables to avoid unnecessary signal interference.
Q5: Is a 1.25G 1310nm 10km LX module compatible with 20km or 40km (EX/LH) modules?
A: Physical interconnection is available but unstable. Different transmission power and distance parameters will cause optical power mismatch, resulting in packet loss and link flapping, so this 10km LX optical module cannot be paired with long-distance EX/LH modules.
Q6: Do I need an optical attenuator for short Single-Mode cable runs (e.g., 2 meters)?
A: No need for daily short-distance deployment. This LX optical module features calibrated transmit power, which avoids over-power saturation on ultra-short single-mode links without an optical attenuator, ensuring stable short-distance transmission.
Q7: What is the receiver sensitivity (RX power limit) for 1.25G LX?
A: The receiver sensitivity of this 1.25G LX optical module is ≤ -19 dBm. It effectively solves network faults caused by excessively low received optical power and ensures stable signal reception within the standard power range.
Q8: What connector type does a 1.25G LX transceiver use?
A: This 1.25G LX optical module adopts standard duplex LC UPC connector, matching mainstream single-mode fiber patch cords to solve connector mismatch and poor connection contact faults.
Q9: Does optical polarity (TX/RX position) matter on fiber patch cords?
A: Yes, optical polarity is critical. Wrong TXRX crossover connection will directly cause the optical module link to fail and port down. Standard transmit-receive crossover wiring is required for normal link activation.
Q10: Is this transceiver hot-swappable?
A: Yes. This Arista compatible optical module supports hot-swap plug-and-play, enabling non-disruptive replacement of faulty modules and avoiding enterprise network service interruption during maintenance.
Q11: What is the mean time between failures (MTBF)?
A: This commercial-grade optical module has a high MTBF rating, with ultra-low failure rate after long-term aging testing. It solves frequent module failure problems of inferior products and reduces repeated maintenance costs.
Q12: How do 3rd-party 1.25G LX modules compare to OEM originals?
A: Our third-party optical module is fully compatible with Arista OEM originals in performance and verification, with zero alarm and consistent transmission stability. It solves the pain point of expensive original modules and achieves cost-effective bulk replacement.
Q13: Can commercial-grade LX SFPs be used in unconditioned outdoor cabinets?
A: No. This commercial-grade optical module only adapts to 0℃~70℃ indoor constant-temperature environments. Unconditioned outdoor temperature fluctuations will cause performance attenuation and unstable link faults.
Q14: What laser safety class applies to 1310nm FP/DFB lasers?
A: The 1310nm laser adopted by this LX optical module complies with standard laser safety specifications, with safe optical power output, no radiation hazards during normal deployment, and meets commercial network safety deployment requirements.
Q15: Can this 1.25G LX module auto-negotiate down to 100Mbps Fast Ethernet? A: Yes. This 1.25G optical module supports automatic speed negotiation, which can be downward compatible with 100Mbps fast Ethernet, solving speed adaptation faults in mixed-rate network environments.
Packaging Options & Custom‑Packaging Solutions
Every transceiver module gets reliable ESD‑safe packaging out of the box. Standard packing is ready for immediate shipment, while custom‑printed packaging with your logo is available for bulk orders.

Why Network Engineers Choose HYTOPTODEVICE