| NO. | Brand | Compatible P/N | Transceiver Type |
| 1 | Cisco | SFP-10G-SR | SFP-10G-SR(Alcatel) |
| 2 | Cisco | SFP-10G-SR-S | SFP-10G-LR |
| 3 | Cisco | SFP-10G-SR-X | SFP-10G-LRM |
| 4 | Cisco | SFP-10G-SR-I | SFP-10G-ER |
| 5 | Arista Networks | SFP-10G-SR | SFP-10G-ZR |
| 6 | Brocade | 10G-SFPP-SR | |
| 7 | Huawei | SFP-10G-USR | |
| 8 | HP Procurve | J9150A |
The Difference:SFP-10G-SR vs SFP-10G-SR-S vs SFP-10G-SR-X vs SFP-10G-SR-I
Key Technical Specifications
|
Cisco Compatible |
SFP-10G-SR-I |
Vendor Name |
HYTOPTODEVICE |
| Form Factor | SFP+ | Max Data Rate | 10.7Gbps |
| Wavelength | 850nm | Max Distance | 300m on OM3 |
| Connector | Duplex LC | Transmitter Type | VCSEL 850nm |
| Cable Type | MMF | Receiver Type | PIN |
| TX Power | -6.5~-0.5dBm | Receiver Sensitivity | < -10.5dBm |
| Power Consumption | ≤1W | Operation Temperature | -40 to 85°C (-40 to 185°F) |
Usage Guidelines & Best Practices
Fiber Choice: Duplex LC Multimode Fiber (MMF) — OM3 / OM4 (50/125 µm). Do NOT use SMF.
Connector Match: UPC/PC polish only. Do NOT use APC.
Cleanliness & Dust: Keep dust caps on whenever unattached. Clean fiber end-faces with a optical cleaning pen before insertion; dust causes over 80% of optical link failures.
Link Setup:Set speed to 10Gbps Full Duplex. Lock speed manually if auto-negotiation fails.
Handling: Wear ESD protection. Keep fiber bend radius ≥ 30 mm.
Installation & Hot-Swap Rules: MSA hot-swappable. Insert/remove gently without powering down.
Environment: Industrial grade (-40°C to 85°C). Avoid extreme heat, moisture, and dust.
Full Compatibility List and Supported Devices
1. Supported Hardware & Firmware
Main Application Scenarios
• Industrial control network 10G fiber uplink for factory automation
• Outdoor unconditioned cabinet rack-to-rack interconnection
• Harsh-environment 10G SAN storage and virtualization cluster links
• Mining, transportation and energy sector multimode fiber networking
• Bulk supply of Cisco compatible SFP-10G-SR-I transceiver for global industrial buyers via our professional cisco 10gbase-sr sfp+ supplier service













FAQ
Q1: Can this industrial‑rated multirate 10G optic run on various brands of industrial and enterprise network gear?
A: YES. It passes real-machine testing for Cisco IE, Nexus, Catalyst, Arista, Juniper and Dell. We offer two EEPROM versions; share your switch model and firmware for pre-matching when sourcing cross-brand industrial 10GBASE-SR optics from our cisco 10gbase-sr sfp+ supplier.
Q2: Will pairing this industrial 10G multirate module with legacy 1G SFP‑SX optics create valid fiber links?
A: NO. Speed and modulation mismatch stop link negotiation. Always match transceiver speeds on both ends for industrial multirate 10G SFP+ SR modules from our cisco 10gbase-sr sfp+ supplier.
Q3: Does deploying third‑party SFP‑10G‑SR‑I industrial optics invalidate original network‑equipment manufacturer hardware warranty?
A: NO. Base hardware warranty remains intact unless the module damages the port. We provide factory test reports for compliance audits on bulk rugged SFP-10G-SR-I transceivers from our cisco 10gbase-sr sfp+ supplier.
Q4: What should operators do when receiving "unsupported transceiver" alerts on Cisco IE‑series industrial switches?
A: Avoid forcing alarm suppression. Our pre-coded Cisco-I industrial EEPROM variant achieves zero-alarm operation for site rollout of pre-programmed SFP-10G-SR-I optics from our cisco 10gbase-sr sfp+ supplier.
Q5: Am I able to fetch real‑time optical operational parameters from this industrial‑grade SFP‑10G‑SR‑I multirate transceiver?
A: YES. DDM is enabled to monitor power and temperature. Check switch firmware if readings fail to load for DDM-supported industrial 10GBASE-SR SFP+ optics from our cisco 10gbase-sr sfp+ supplier.
Q6: Which fiber‑cable categories are suitable for deployment together with SFP‑10G‑SR‑I industrial multirate optical transceiver?
A: Multimode fiber only. OM3 supports 300m, OM4 reaches 400m. OM4 is recommended for new industrial cabling projects for wholesale 10G SR multimode transceivers from our cisco 10gbase-sr sfp+ supplier.
Q7: Is it acceptable to implement this multimode‑optimized industrial 10G transceiver over existing single‑mode fiber cabling infrastructure?
A: NO. The 850nm VCSEL cannot transmit effectively over single-mode fiber. Choose LR single-mode modules for SMF cabling scenarios from our cisco 10gbase-sr sfp+ supplier.
Q8: What is the emitting‑light wavelength specification for this Cisco‑compatible industrial SFP‑10G‑SR‑I transceiver?
A: 850nm, Class 1 laser. Deploy matching 850nm SR transceivers and use DDM to track laser health under fluctuating field temperatures for wide-temperature 10GBASE-SR optics from our cisco 10gbase-sr sfp+ supplier.
Q9: What physical fiber‑connector interface does industrial‑grade SFP‑10G‑SR‑I adopt?
A: Duplex LC-UPC. Do not mix APC connectors and avoid TX/RX reversal for LC interface industrial 10GBASE-SR SFP+ transceivers from our cisco 10gbase-sr sfp+ supplier.
Q10: Does SFP‑10G‑SR‑I industrial multirate transceiver achieve normal interoperability with OM5 lime‑green wide‑band multimode patch cords?
A: YES. OM5 works well with this module; maximum distance stays at 400m for OM5 compatible industrial 10G SR transceivers from our cisco 10gbase-sr sfp+ supplier.
Q11: How much power will this full‑industrial‑grade 10G SFP+ SR‑I consume under maximum traffic loading?
A: ≤1.0W, low power for high-density industrial ports. Monitor temperature via DDM for low-power industrial 10GBASE-SR SFP+ modules from our cisco 10gbase-sr sfp+ supplier.
Q12: What temperature‑grade variants are offered for this compatible SFP‑10G‑SR‑I optical component?
A: -40~85℃ industrial grade in stock. Extended and commercial temperature versions are available by custom order for variable-temperature 10GBASE-SR optics from our cisco 10gbase-sr sfp+ supplier.
Q13: Can this harsh‑environment multirate optic satisfy strict industrial‑data‑center bit‑error‑rate performance criteria?
A: YES, BER ≤1×10⁻¹², compliant with IEEE 802.3ae. Burn-in testing is available before shipment for industrial data center 10G SR transceivers from our cisco 10gbase-sr sfp+ supplier.
Q14: Can SFP‑10G‑SR‑I industrial‑grade optic deliver full bidirectional multirate line‑rate under its supported protocol modes?
A: YES, stable 9.83–11.31Gbps multirate. Confirm your Cisco IE switch firmware supports this profile before bulk purchase of multi-protocol industrial 10GBASE-SR modules from our cisco 10gbase-sr sfp+ supplier.
Q15: What link‑failure symptoms will appear when incoming received optical power falls below the industrial‑module sensitivity threshold?
A: Link flapping or port down. Inspect fiber cleanliness, patch cords and laser aging when Rx power is insufficient for industrial SFP-10G-SR-I transceivers from our cisco 10gbase-sr sfp+ supplier.
Packaging & Custom OEM Solutions
Every 10G SFP+ module comes individually sealed in standard anti-static (ESD-safe) packaging, pre-stocked and ready for immediate shipment. For bulk orders, we offer custom OEM packaging—including logo printing and private labeling—tailored for network distributors, system integrators, and enterprise deployments.
Why Network Engineers Choose HYTOPTODEVICE
HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP+ modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia
Quality Certification & Compliance
At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.
We adhere to rigorous standards for our SFP modules and network solutions:
ISO 9001: Certified quality management and production consistency.
CE & FCC: Fully compliant for seamless Global Market Access.
RoHS: Committed to environmental responsibility and hazardous material control.
Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.
Certified Quality. Global Standards. Guaranteed Performance.



