10G SFP+ ZR Transceiver Compatible Arista Networks  SFP-10G-ZR | HYTOPTODEVICE

10G SFP+ ZR Optical Transceiver Module Compatible Arista Networks SFP-10G-ZR (10GBASE-ZR, SMF, 1550nm, 80km, LC, DOM) | HYTOPTODEVICE
HYTOPTODEVICE SFP-10G-ZR compatible Arista Networks  is a high-performance,hot-pluggable 10GBASE-ZR SFP+ optical transceiver. It supports high-speed 10Gbps data transmission up to 80 kilometers (49.7 miles) over LC Duplex Connector with Single Mode Fiber(SMF). Integrating a cooled EML transmitter and a high-sensitivity APD receiver,  this module is specifically designed for data center interconnects (DCI) and long-haul 10-Gigabit Ethernet links. Compliant with both SFP+MSA and IEEE 802.3ae, SFF-8472, SFF-8431, SFF-8432. With low latency and low power consumption, the Arista compatible 10G transceiver is ideal for data center, 10G Ethernet and Fibre Channel etc.

Key Technical Specifications of 10G SFP+ ZR 

Full Compatibility List and Supported Devices of Third party Arista SFP 10G ZR
   One of the biggest advantages of HYTOPTODEVICE compatible optical transceiver is the full brand compatibility.Featuring stable plug-and-play performance for 10G Network Switches and industrial standard Compliance for Enterprise-Grade Networks. It helps enterprises cut hardware costs without sacrificing performance. Worried about compatibility? Don't be.hardware verified compability with Cisco,Huawei,Arista,Juniper. We deliver verified results on real module,real hardware. Video proof available upon request. Our long-haul network transceiver is fully tested and certified to work seamlessly with the following Arista Networks equipments:

• Arista 7050X / 7050X3 Series: DCS-7050SX3-48YC12, DCS-7050SX-64, DCS-7050TX3-48C8

• Arista 7150 Ultra-Low Latency Series: DCS-7150S-24, DCS-7150S-52, DCS-7150S-64

• Arista 7280R / 7280R3 Deep Buffer Series: DCS-7280SR3-48YC8, DCS-7280SR-48C6

• Arista 7300 / 7300X Series Modular Chassis: Dedicated 10G/48-port SFP+ line cards (e.g., DCS-7300X-64S-LC)

• Arista 7010T Gigabit Ethernet Edge: DCS-7010T-48 (Utilizing 10G SFP+ uplink ports)

Main Application Scenarios of 10GBASE-ZR SFP+ 80km Arista

• Data Center Interconnect (DCI): Linking ultra-low latency enterprise cloud data centers or multi-tenant colocation facilities across regional distances.

• Leaf-Spine Infrastructure Expansion: Bridging geographically separated spine switches to centralized leaf nodes across broad campus environments.

• Metro Ethernet Aggregation: Deployed by ISPs and cloud service providers to connect regional points of presence (PoPs) directly to edge routing matrices.

• Disaster Recovery Routing: Providing the high-bandwidth backbone required for real-time synchronous database replication over long physical distances.

Technical Warning: When testing or deploying this SFP-10G-ZR 80km module over short distances (typically less than 30km), an optical attenuator (12dB to 15dB) must be used. Failure to attenuate the signal may cause permanent damage to the receiver due to optical overload.

Connectivity Solutions(Applications) of Arista Compatible Fiber Optic Module

HYTOPTODEVICE 10G SFP+ ZR compatible modules provide all-in-one long-distance connectivity covering carrier backbone,DCI and enterprise campus networking scenarios.

FAQ FOR  10G SFP+ Transceiver Modules

Q1: Will this Arista Networks compatible SFP-10G-ZR trigger an unsupported warning on EOS systems?
A1: No warning and no port blocking occur. Our HYTOPTODEVICE Arista Networks compatible SFP-10G-ZR transceiver is written with precise factory-calibrated hardware signatures. Arista Networks EOS systems fully recognize the module as a legitimate qualified optic, eliminating non-OEM warning traps, untrusted transceiver alerts, and automatic port blocking to maintain stable production network operation.
 
Q2: Does the SFP-10G-ZR transceiver work seamlessly with Arista EOS?
A2: Yes. The HYTOPTODEVICE SFP-10G-ZR offers 100% verified compatibility with Arista EOS systems. It runs flawlessly on mainstream Arista platforms, supports full CLI recognition, and delivers stable 10G long-haul forwarding without configuration errors or compatibility conflicts.
 
Q3: Can I test this 80km SFP-10G-ZR module using a short 1-meter patch cord?
A3: Direct short-cord testing is strictly forbidden without proper attenuation. The SFP-10G-ZR adopts a highly sensitive APD receiver designed for long-reach 80–100km single-mode links. Excessive optical power from short-distance direct connection will permanently degrade or burn out the receiver, causing irreversible module damage.
 
Q4: What is the mandatory minimum attenuation for shorter spans? 
A4: In links shorter than 40km or with total optical loss below 15dB, inline attenuation is mandatory. Deploy a 10dB to 15dB optical attenuator to reduce excessive receive power, protect the APD receiver, and ensure long-term reliable operation of HYTOPTODEVICE 10G-ZR transceivers in low-loss short-span environments.
 
Q5: Does this SFP-10G-ZR support 1Gbps or 100Mbps fallback speeds?
A5: No. The HYTOPTODEVICE Arista Networks compatible SFP-10G-ZR is a fixed-rate 10Gbps SFP+ transceiver. It only operates at a native 10G speed and does not support auto-negotiation, multi-rate fallback, or downclocking to 1G or 100Mbps. It is dedicated for stable 10G long-distance transmission.
 
Q6: Does it support OTN or Synchronous Ethernet (SyncE)?
A6: Yes. The layer-1 optical and timing components of HYTOPTODEVICE SFP-10G-ZR fully support Synchronous Ethernet (SyncE) timing integrity. It complies with standard SONET/SDH 9.95Gbps clock specifications, perfectly matching Alcatel-Lucent and Nokia WAN, OTN, and carrier-grade synchronous networking deployment requirements.
 
Q7: Why does the port show "Operational Status: Down" even when light is received?
A7: The most common cause is crossed TX/RX fiber polarity. For any long-haul SFP+ link deployment, ensure the local TX transmit fiber connects strictly to the remote RX receive port, and the local RX fiber connects to the remote TX port. Correcting fiber crossover will resolve most link-down issues with detected optical power.
 
Q8: Can this sfp-10g-zr optical module be combined with a CWDM/DWDM multiplexer?
A8: No. The HYTOPTODEVICE SFP-10G-ZR is a standard wideband 1550nm non-color-fixed transceiver, not a wavelength-locked CWDM or DWDM optic. It cannot be used in MUX/DEMUX wavelength division systems. For CWDM or DWDM networking environments, please select dedicated color-specific SFP+ transceivers.
 
Q9: What causes high Bit Error Rates (BER) over an established 70km link using the Third party Arista 10G ZR?
A9: High BER on long-span 70km links is mainly caused by dirty fiber end faces, contaminated bulkhead connectors, or excessive chromatic dispersion on aged single-mode fiber lines. Always clean all patch cords, adapters, and port interfaces with professional fiber cleaning tools before installation to eliminate dust, oil, and scratches that degrade optical signal quality.

Why Network Engineers Choose HYTOPTODEVICE

HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.

• 100% hardware-tested compatibility with Cisco, Huawei,Dell,Juniper, and Arista
• ISO 9001:2015 certified manufacturing facility in Shenzhen
• Full product range coverage:1.25G/10G/25G/40G/100G/200G/400G/800G/1.6T
• In-stock supply & fast global shipping, average lead time of 3–5 business days with DHL/FedEx express options
• Dedicated pre-sales engineering support for custom configurations
• Actual hardware,actual switches,actual results.we publish compatibility test video,eliminate compatibility anxiety. you can watch before you buy. 
• We can provide inspection and shipping videos to make you feel as if you are right here with the product.
• Private Label support - EEPROM / firmware customization support

“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP+ modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia

Quality Certification & Compliance

 At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.

We adhere to rigorous standards for our SFP modules and network solutions:

• ISO 9001: Certified quality management and production consistency.

• CE & FCC: Fully compliant for seamless Global Market Access.

• RoHS: Committed to environmental responsibility and hazardous material control.

• Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.

Certified Quality. Global Standards. Guaranteed Performance.

Rigorous Industrial Product Testing

   

100% 3rd Party Compatible

Partial Test Demonstration

Others