Cisco SFP-10G-LRM Compatible SFP+ 10G LRM Transceiver | 10GBASE-LRM 1310nm 220m MMF Bulk Wholesale | HYTOPTODEVICE

HYTOPTODEVICE drop‑in replacement for Cisco SFP‑10G‑LRM SFP+ 10G LRM transceiver, 10.3125Gbps 1310nm FP laser. Supports OM1‑OM4 multimode and OS2 single‑mode fiber with 220 m maximum reach, duplex LC interface with full SFF‑8472 DDM support. Pre‑programmed Cisco‑specific EEPROM to avoid third‑party transceiver alerts. Bulk wholesale, private‑label marking and custom EEPROM programming available for data‑center integrators and global distributors.Price: From $1.00 (Bulk Quote Available) | In Stock

NO.	Brand	Compatible P/N	Transceiver Type
1	Cisco	SFP-10G-LRM	SFP-10G-SR
2	Arista Networks	SFP-10G-LRM	SFP-10G-LR
3	H3C	SFP-XG-LRM-MM1310	SFP-10G-ER
4	HPE ProCure	J9152A	SFP-10G-ZR
5	HPE Aruba	J9152D
6	HPE BladeSystem	455889-B21
7	Huawei	OSXD22N00
8	Dell	330-2403
9	Juniper	EX-SFP-10GE-LRM
10	Brocade	10G-SFPP-LRM

GET A QUOTE

Description

Cisco SFP‑10G‑LRM Compatible SFP+ 10G LRM Transceiver | 10GBASE‑LRM 1310nm 220m MMF Bulk Wholesale

Product Overview

HYTOPTODEVICE SFP+ 10G LRM transceiver functions as drop‑in alternative for Cisco SFP‑10G‑LRM, supporting stable 10‑gigabit transmission over OM1–OM4 multimode and OS2 single‑mode fiber on Cisco enterprise and data‑center switches, with a maximum reach of 220 m.

This MSA‑compliant 10GBASE‑LRM SFP+ optical unit adopts 1310 nm FP laser architecture, delivering target reach via duplex LC connectors. It meets IEEE 802.3aq, SFF‑8431 and SFF‑8472 industry standards, equipped with complete DDM real‑time diagnostic capability helping network technicians locate fiber‑layer faults efficiently.

Every HYTOPTODEVICE SFP+ 10G LRM transceiver ships pre‑flashed with Cisco‑optimized EEPROM profiles, eliminating unrecognized‑transceiver pop‑ups and unexpected port shutdown risks. Low power draw reduces thermal stress inside densely populated racks. Perfect for data‑center refresh, intra‑building short‑reach backbone links and high‑volume purchasing for system integrators and overseas resellers.

Key Technical Specifications

Cisco Compatible	SFP-10G-LRM	Vendor Name	HYTOPTODEVICE
Form Factor	SFP+	Max Data Rate	10.3125Gbps
Wavelength	1310nm	Max Distance	220m@OM3/300m@SMF
Connector	Duplex LC	Transmitter Type	1310nm FP
Cable Type	50/125µm@OM3 MMF, 9/125μm@SMF	Receiver Type	PIN
TX Power	-6.5~-0.5dBm	Receiver Sensitivity	< -10.0dBm
Power Consumption	≤1W	Receiver Overload	1.5dBm
Protocols	IEEE 802.3ae, SFF-8472, SFF-8431, SFF-8432, SFP+ MSA Compliant, CPRI, eCPRI	Operation Temperature	0 to 70°C (32 to 158°F)

For detailed technical specifications, please refer to the Datasheet

Usage Guidelines & Best Practices

Fiber Compatibility: Supports OM1–OM4 multimode and OS2 single-mode fiber (max 220 m). A Mode Conditioning Patch Cord (MCP) is mandatory on the TX port for legacy OM1/OM2 fiber to prevent signal degradation.
Maintenance & Polarity: Clean LC connectors before insertion to avoid signal loss. Ensure correct polarity—always map the MCP single-mode leg to the TX port.
Distance & Link Budget: Maximum distance is strictly 220 m across all fiber types. Excessive splices, patch panels, or sharp bends will reduce range.
Thermal Management: Power consumption is ≤1W $\le 1\text{ W}$ , operating standardly at 0°C to 70°C without auxiliary cooling.
Industrial Grade Option: For outdoor or harsh environments with extreme temperatures, select industrial-grade (-40°C to 85°C) modules.

For detailed operation instructions, please refer to the User Guide.

Full Compatibility List & Supported Network Hardware

1. Supported Hardware & Firmware

HYTOPTODEVICE SFP+ 10G LRM transceiver matches mechanical dimensions and optical performance indexes of original Cisco SFP‑10G‑LRM. Custom‑calibrated EEPROM suppresses third‑party transceiver warning logs. Each production batch undergoes real‑machine traffic testing on genuine Cisco hardware to avoid signal distortion and unstable link performance.

Validated Cisco Platforms:

• Cisco Nexus 5000 / 7000 / 9000 series data‑center switches

• Cisco Catalyst 9000 / 3850 enterprise campus switches

• Cisco MDS storage‑area networking switches

• Cisco UCS server platforms equipped with SFP+ capable NIC adapters

• Cisco enterprise rack‑mount switching appliances

2. Multi-Brand Cross Compatibility

Built upon universal SFP+ MSA specification, HYTOPTODEVICE SFP+ 10G LRM transceiver maintains stable operation across Cisco, Arista, Juniper, Dell, HPE and other mainstream network hardware. Well‑suited for multi‑vendor mixed‑fabric environments, intra‑data‑center short‑reach interconnections and mixed‑fiber cabling renovation projects.

3. Free Value-Added Services

HYTOPTODEVICE offers competitive bulk pricing for resellers, system integrators and data center contractors. We provide free special compatible EEPROM reprogramming for all bulk orders.

Available options include private label printing, custom packaging and deployment consulting. All modules pass optical calibration, temperature cycling and 72-hour full-traffic burn-in. Large-volume orders enjoy tiered discounts to reduce project CAPEX.

Primary Application Scenarios

• Intra‑data‑center fiber backbones across mixed‑fiber infrastructure

• Cost‑effective 10G infrastructure upgrade re‑using existing cabling

• Short‑reach 10G uplink connections for aggregation and top‑of‑rack switches inside enterprise premises

• Bulk supply for global optical‑component distributors and system integration partners

• Multi‑vendor hybrid data‑center rack‑to‑rack fiber interconnections

Connectivity Solutions(Applications)

1. 10G to 10G for Switch-Switch Interconnection

2.10G for Switch-Media Converter

3.10G for Switch to NIC

4.10G Structured Cabling Deployment

The Core Feature

1.10G High-Density & Ultra-Low Power Connectivity

Low‑power high‑density SFP+ 10G LRM transceiver delivers budget‑friendly 10‑gigabit upgrade paths for Cisco‑centered networks. It supports reuse of existing cabling, supporting incremental network expansion.

Power‑saving high‑density SFP+ 10G LRM transceiver for multimode fiber reuse in Cisco‑based data‑center 10G upgrade

2.Verified Host Interoperability

Each production batch of HYTOPTODEVICE SFP+ 10G LRM transceiver runs physical interoperability tests against Cisco NX‑OS and other mainstream network operating‑system firmware. Pre‑calibrated EEPROM register data eliminates unauthorized‑transceiver warning logs, delivering consistent plug‑and‑play reliability for bulk‑order clients.

hytoptodevice cisco compatible sfp-10g-lrm optical transceiver module for data center

3.Rigorous Testing, Uncompromising Reliability

All SFP+ 10G LRM transceiver units pass fiber‑link simulation, high‑low temperature cycling and 72‑hour full‑rate traffic burn‑in tests. Precision optical‑power calibration optimizes signal performance. Built‑in DDM monitoring enables remote early‑fault identification for non‑stop 24/7 intra‑data‑center backbone operation.

72-hour full traffic burn-in quality inspection for wholesale SFP+ 10G LRm before shipment

FAQ

Q1: Could I populate an SFP+ 10G LRM module inside a 25G‑capable SFP28 switch port and achieve stable 10G operation?

A: Most SFP28 hardware ports deliver backward compatibility for 10G‑rate SFP+ modules and will negotiate down to 10Gbps. Some Cisco firmware revisions demand manual port‑speed configuration to avoid unstable link handshake states.

Q2: What root causes generate “unsupported transceiver” warning notifications across Cisco switching devices?

A: This alert triggers when switch firmware reads mismatched vendor identifier values stored inside module EEPROM memory. Our HYTOPTODEVICE units ship pre‑programmed with Cisco identification parameters to bypass this validation check. Out‑of‑date switch firmware may also produce this warning message.

Q3: Can network administrators retrieve live DDM diagnostic metrics from this SFP+ 10G LRM optical unit?

A: Yes, our HYTOPTODEVICE SFP+ 10G LRM transceiver supports complete DDM digital‑monitoring feature. Operators can pull real‑time readings including transmit power, receive power, laser bias current, module temperature and supply voltage directly from Cisco switch CLI interfaces.

Q4: What is the typical power‑consumption figure for this SFP+ 10G LRM transceiver?

A: Our commercial‑grade SFP+ 10G LRM transceiver consumes less than 0.8 W under regular working conditions. Low energy draw lowers overall rack thermal load during large‑scale module roll‑outs inside data centers.

Q5: What temperature operating span can this SFP+ 10G LRM transceiver sustain for continuous production‑environment operation?

A: Standard commercial‑grade units deliver stable performance between 0°C and +70°C for indoor data‑center deployment. We also supply industrial‑spec variants rated ‑40°C up to +85°C suited for outdoor cabinets and harsh‑condition deployment sites.

Q6: Transmit‑power readings show normal values at both link ends, yet physical link LED remains dark, what may drive this failure symptom?

A: This issue points overwhelmingly toward receive‑side signal degradation. Contaminated fiber end faces, damaged patch cords, improper fiber grade or accumulated excessive optical loss can block incoming light even though laser transmitters work fine. Inspecting DDM receive‑power values accelerates troubleshooting workflows.

Q7: Where lie key practical differences between genuine OEM optics and third‑party replacement SFP+ 10G LRM transceivers?

A: OEM optics are branded transceivers sold by network‑hardware vendors at premium price points. Our HYTOPTODEVICE third‑party alternatives follow identical MSA specifications, ship pre‑loaded with vendor‑specific EEPROM, complete full‑suite lab validation, and deliver obvious cost savings without compromising link performance for data‑center‑refresh projects.

Q8: Which fiber cable types work with this 10G SFP+ transceiver?

A: This HYTOPTODEVICE optical transceiver supports OM1‑OM4 multimode and OS2 single‑mode fiber, with a capped maximum transmission reach of 220 m for all supported cable media.

Q9: Is it acceptable to deploy passive optical splitters to replicate traffic over point‑to‑point SFP+ 10G LRM fiber links?

A: SFP+ 10G LRM transceiver is purpose‑built for bidirectional point‑to‑point Ethernet connections. Passive splitters introduce severe optical attenuation and cannot be applied for traffic duplication on this link type. PON‑optimized transceivers are required for splitter‑based network architectures.

Q10: Do infrared laser outputs from SFP+ 10G LRM modules create eye‑safety hazards for on‑site field technicians?

A: SFP+ 10G LRM carries Class 1 laser‑safety rating under normal cabled‑operation conditions. Never stare directly into open module ports or unterminated fiber ends. Invisible infrared laser radiation may produce cumulative eye injury even without visible light output.

Packaging & Custom OEM Solutions

Our 10G SFP+ LRM module comes sealed in standard anti-static (ESD-safe) packaging, pre-stocked and ready for immediate shipment. For bulk orders, we offer custom OEM packaging—including logo printing and private labeling—tailored for network distributors, system integrators, and enterprise deployments.

Why Network Engineers Choose HYTOPTODEVICE

HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.

Up to 70% cost savings vs OEM, transparent pricing & flexible bulk rates, supported quality returns
100% real-device compatible with Cisco, Huawei,Dell,Juniper, and Arista
ISO 9001:2015 Shenzhen factory, full lineup: 1.25G/10G/25G/40G/100G/200G/400G/800G/1.6T transceivers
Ample stock, fast global DHL/FedEx shipping in 3–5 working days
Free pre-sales engineering support for custom EEPROM & private label firmware
Real switch test videos available for pre-purchase review; inspection & shipping videos provided per order

“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia

Quality Certification & Compliance

At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.

We adhere to rigorous standards for our SFP modules and network solutions:

ISO 9001: Certified quality management and production consistency.
CE & FCC: Fully compliant for seamless Global Market Access.
RoHS: Committed to environmental responsibility and hazardous material control.
Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.