• Brocade E1MG-EZX-120 Compatible 1000BASE-EZX Pluggable Transceiver | SFP 1550nm 120km SMF Bulk Wholesale | HYTOPTODEVICE
  • Brocade E1MG-EZX-120 compatible transceiver
  • 1000BASE-EZX 120km SMF SFP module
  • 1550nm long-range gigabit optical module
  • Brocade Fabric OS zero-alarm optical module
  • Brocade E1MG-EZX-120 Compatible 1000BASE-EZX Pluggable Transceiver | SFP 1550nm 120km SMF Bulk Wholesale | HYTOPTODEVICE
  • Brocade E1MG-EZX-120 compatible transceiver
  • 1000BASE-EZX 120km SMF SFP module
  • 1550nm long-range gigabit optical module
  • Brocade Fabric OS zero-alarm optical module

Brocade E1MG-EZX-120 Compatible 1000BASE-EZX Pluggable Transceiver | SFP 1550nm 120km SMF Bulk Wholesale | HYTOPTODEVICE

HYTOPTODEVICE supplies Brocade E1MG-EZX-120 compatible 1000BASE-EZX SFP transceivers. These 1550nm modules support 120km SMF transmission. They run zero-alarm on Brocade Fabric OS and feature full DOM monitoring. Cost-effective and in stock, they replace pricey original Brocade modules. We offer samples, spot delivery and bulk wholesale for enterprise network upgrades. support private label, custom EEPROM programming and OEM for global importers, distributors and wholesaler.
NO. Brand  Compatible P/NT Transceiver Type
1 Cisco GLC-EZX-SM-120 SFP-G85-5LD
2 Arista Networks  SFP-1G-EZX-120  SFP-G31-10LD
3 Huawei  eSFP-GE-ZX120-SM1550 SFP-G31-40LD
4 Juniper  SFP-1GE-EZX-120  SFP-G55-80LD
5 Brocade  E1MG-EZX-120 SFP-G55-100LD
Description

Brocade E1MG-EZX-120 Compatible 1000BASE-EZX Pluggable Transceiver | SFP 1550nm 120km SMF Bulk Wholesale | HYTOPTODEVICE

Product Overview

This 1000BASE-EZX SFP transceiver is fully compatible with Brocade E1MG-EZX-120. Custom Fabric OS adaptive firmware ensures plug-and-play operation. It runs zero-alarm on mainstream Brocade switches with no extra configuration needed.
Equipped with 1550nm DFB laser chips, the module features low signal attenuation. It supports stable 120km long-distance transmission over standard G.652 single-mode fiber.
All Brocade-compatible SFP modules pass strict aging and Fabric OS compatibility tests. We provide sample testing, spot stock and factory wholesale to solve high cost and stock shortage issues of original Brocade optical modules.

Key Technical Specifications 

Brocade Compatible E1MG-EZX-120 Vendor Name HYTOPTODEVICE
Form Factor SFP Max Data Rate 1.25Gbps
Wavelength 1550nm Max Distance 120km 
Connector Duplex LC Transmitter Type DFB 1550nm
Cable Type SMF Receiver Type APD
TX Power 1~5dBm Receiver Sensitivity < -32.0dBm
Typical Power Consumption ≤1W Receiver Overload -8dBm
Bit Error Ratio (BER) 1E-12 DDM/DOM Support
Protocols SFF-8472 MSA Compliant, IEEE 802.3ah-2004 Operation Temperature 0 to 70°C (32 to 158°F)

Usage Guidelines & Best Practices

  • Fiber Choice: Use Single-Mode Fiber (SMF) only. Do NOT use MMF
  • Laser Safety: Never look directly into optical ports or fiber ends.
  • ESD Safety:: Wear an anti-static wrist strap before handling.
  • Connector Match: UPC/PC polish only. Do NOT use APC

  • Cleanliness & Dust: Keep dust caps on all unused ports and connectors at all times. Clean fiber end-faces with a optical cleaning pen before insertion; dust causes over 80% of optical link failures.

  • Optical Attenuator Required for Short Links: For testing or short-distance connections (<10 km), connect a 15dB–20dB optical attenuator to the RX port to prevent damaging the receiver.

  • Installation & Hot-Swap Rules:MSA hot-swappable. Insert/remove gently without powering down.

  • High Loss/Packet Drops: Check fiber bend radius (>30 mm); inspect optical power levels; clean optical connectors 

  • No Link: Swap TX/RX fiber connections; clean fiber end-faces; verify port settings.

     Links to the Datasheet, User Guide and Compatibility Guides are available on the product page.

Full Compatibility List and Supported Devices

1. Supported Hardware & Firmware

This Brocade-compatible SFP transceiver uses Fabric OS-tailored firmware. It fixes common issues like unrecognized modules, system alarms and firmware conflicts, supporting new and legacy Brocade Fabric OS system versions.
  • Brocade FastIron / ICX Series Enterprise Switches
  • Brocade NetIron / MLX Series Network Routers
  • All Brocade devices with standard SFP gigabit slots running Fabric OS

2. Multi-Brand Cross Compatibility

This 1000BASE-EZX pluggable transceiver follows universal MSA standards, realizing stable interconnection with Cisco, H3C, Juniper and other mainstream devices to solve multi-brand network adaptation problems.

3. Free Value-Added Services

We provide professional customization for bulk optical transceiver module orders, including firmware adaptation and custom labeling, meeting personalized procurement demands for compatible optical modules.


Main Application Scenarios

  • 120km Enterprise Backbone Networking: Ideal for cross-site campus and enterprise long-distance backbone fiber links for Brocade network systems.
  • Network Distributor Bulk Stocking: Cost-effective Huawei compatible modules reduce wholesaler inventory pressure and procurement costs.
  • Brocade Network Distance Upgrade: Replace short-range modules to extend enterprise network 120km long-haul transmission coverage for Brocade switches.
  • Remote Campus & Branch Interconnection: Stable 1550nm long-distance links connect distributed enterprise campuses and branch networks.
Connectivity Solutions(Applications) 

1.1GbE Switch-to-Switch Connectivity
Factory wholesale compatible 1000BASE-ZX 120km pluggable transceiver module for long haul network deployment

2.1GbE Switch to Media Converter Connectivity1550nm 120km SMF long range gigabit pluggable transceiver cheap bulk order for switch devices

3.1G Structured Cabling
Cost-effective long-haul 120km pluggable transceiver bulk procurement solution for enterprise network upgrade


The Core Feature

1. Low-Power, Cost-Effective Long-Haul Connectivity

Designed for high-reliability data center networks, this 1.25G 1550nm optical module supports long-reach transmission up to 120km. Featuring low power consumption and high cost-efficiency, it is the ideal choice for expanding your Gigabit Ethernet coverage.

HYTOPTODEVICE 1000BASE-EZX 120km SMF pluggable transceiver module with low power consumption


2.
Host-Tested for Proven Interoperability

All transceiver modules pass real device testing. Pre-flashed EEPROM ensures zero-alarm recognition, fixing third-party module incompatibility and link flapping for safe bulk purchase.Specific Compatibility Video available upon request.

Plug-and-play  1000base-zx replacement pluggable transceiver zero-error compatible with switches and routers


3.100% Tested for Zero-Defect Reliability

Step inside our  Test Center  to see every optical module is 100% tested before shipment, ensuring zero-defect reliability and maximum uptime for your network.

HYTOPTODEVICE bulk 120km SFP ZX  pluggable transceiver wholesale with 100% test


FAQ

Q1: How to troubleshoot intermittent 120km link flutters on Brocade E1MG-EZX-120 modules?
A: Troubleshoot via Fabric OS DDM real-time data. Optical power fluctuations indicate dirty ports or faulty single-mode fibers. Zero power and system alarms confirm module hardware failure.

Q2: How to fix loose SFP module insertion contact on Brocade switch ports?

A: Slot dust and improper insertion cause poor contact. Clean port slots thoroughly, insert modules vertically until fully locked. Avoid forced installation to prevent port damage.

Q3: Are Brocade compatible 120km SFP modules suitable for frequent hot-swap maintenance?
A: Yes. Reinforced latch structure and strict plugging tests ensure stable contact. Modules maintain normal link status after repeated daily hot-swap operations.

Q4: Why do LC jumpers fail to lock firmly with Brocade 120km long-haul SFP modules?

A: Loose locking comes from aging jumpers, dirty end faces or wrong connector types. Use clean standard UPC jumpers to ensure stable fiber connection.

Q5: Do third-party SFP modules adapt to high-density Brocade enterprise switch deployment?

A: Fully compatible. Standard MSA size fits Brocade high-density ports perfectly. Reserved heat dissipation space avoids overheating in dense cabinet installation.

Q6: What impact does high cabinet temperature have on Brocade 120km SFP module performance?
A: High ambient temperature causes laser power attenuation and random packet loss. Optimized heat dissipation design ensures stable operation in high-temperature enterprise cabinet environments.

Q7: Can Brocade E1MG-EZX-120 modules run stably in outdoor low-temperature cabinet scenarios?

A: Yes. Each module undergoes professional low-temperature calibration. It supports smooth cold start and stable 120km transmission in low-temperature outdoor environments.

Q8: How to protect Brocade long-haul SFP modules in humid coastal salt-fog environments?

A: Humidity and salt fog corrode module ports and laser components. Use dust caps and sealed cabinets. Custom industrial-grade modules support harsh coastal deployment.

Q9: Does large-scale dense installation cause overheating for Brocade 120km SFP transceivers?

A: No. Low-power laser chips and efficient heat conduction eliminate local heat accumulation. Modules run stably even in full dense batch installation.

Q10: Why do module DDM readings differ from external optical power test results?

A: Tiny deviations are normal. Large errors result from dirty ports or uncalibrated tools. Our modules support high-precision factory calibration for accurate DDM monitoring.

Q11: Can DDM
monitoring pre-judge potential 120km fiber link failures for Huawei networks?
A: Yes. Real-time monitoring of optical power, temperature and voltage provides threshold alerts. It helps prevent unexpected long-haul link outages for enterprise networks.

Q12: What causes slow DDM data synchronization on Brocade Fabric OS network management systems?

A: Data delay relates to switch polling cycle and system bandwidth. Optimized module protocols ensure fast and consistent DDM data sync with Fabric OS platforms.

Q13: Do third-party compatible modules fully support DDM diagnosis on Brocade Fabric OS systems?
A: Fully supported. Compliant with SFF-8472 standards, modules retain complete DDM functions. They realize full-data real-time diagnosis and perfect Fabric OS system adaptation.

Q14:
Why cheap generic long-haul eSFP modules suffer early aging and failure?
A: Low-cost modules use uncalibrated lasers and poor heat dissipation. Our modules pass 72-hour aging tests, supporting stable 24/7 long-term enterprise network operation.

Q15: How to prevent ESD static damage to Brocade 120km long-distance SFP modules?

A: Static discharge may burn internal laser chips and disable links. Built-in ESD protection circuits resist static damage, extending module service life in enterprise daily operation.

Packaging Options & Custom‑Packaging Solutions

Every transceiver module gets reliable ESD‑safe packaging out of the box. Standard packing is ready for immediate shipment, while custom‑printed packaging with your logo is available for bulk orders.


Why Network Engineers Choose HYTOPTODEVICE
 

HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.

  • 100% MSA-compliant modules with Cisco, Huawei,Dell,Juniper, and Arista compatibility
  • ISO 9001:2015 certified manufacturing facility in Shenzhen
  • Average lead time of 3–5 business days with DHL/FedEx express options
  • Dedicated pre-sales engineering support for custom configurations
  • Actual hardware,actual switches,actual results.we publish compatibility test video,eliminate compatibility anxiety. you can watch before you buy. 
  • We can provide inspection and shipping videos to make you feel as if you are right here with the product.


"We replaced 200 Cisco-branded SFPs with HYTOPTODEVICE equivalents across our spine layer — zero compatibility issues, 40% cost reduction."— Network Architect, Tier-2 ISP, Germany


Quality Certification & Compliance

 At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final inspection, our processes ensure global compliance and reliability.

We adhere to rigorous standards for our SFP modules and network solutions:

  • ISO 9001: Certified quality management and production consistency.

  • CE & FCC: Fully compliant for seamless Global Market Access.

  • RoHS: Committed to environmental responsibility and hazardous material control.

  • Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.

Certified Quality. Global Standards. Guaranteed Performance.




Rigorous Industrial Product Testing

   

100% 3rd Party Compatible

Partial Test Demonstration

Others

  • Brocade E1MG-EZX-120 Compatible 1000BASE-EZX Pluggable Transceiver | SFP 1550nm 120km SMF Bulk Wholesale | HYTOPTODEVICE
  • Brocade E1MG-EZX-120 compatible transceiver
  • 1000BASE-EZX 120km SMF SFP module
  • 1550nm long-range gigabit optical module
  • Brocade Fabric OS zero-alarm optical module

Download