• Arista Networks SFP-1G-EZX-120 Compatible 1000BASE-EZX Pluggable Transceiver | SFP 1550nm 120km SMF Bulk Wholesale | HYTOPTODEVICE
  • Arista SFP-1G-EZX-120 compatible pluggable transceiver
  • 1000BASE-EZX 120km SMF SFP pluggable transceiver
  • 1550nm long-range gigabit pluggable transceiver
  • ,buy Arista compatible pluggable transceiver in bulk
  • Arista Networks SFP-1G-EZX-120 Compatible 1000BASE-EZX Pluggable Transceiver | SFP 1550nm 120km SMF Bulk Wholesale | HYTOPTODEVICE
  • Arista SFP-1G-EZX-120 compatible pluggable transceiver
  • 1000BASE-EZX 120km SMF SFP pluggable transceiver
  • 1550nm long-range gigabit pluggable transceiver
  • ,buy Arista compatible pluggable transceiver in bulk

Arista Networks SFP-1G-EZX-120 Compatible 1000BASE-EZX Pluggable Transceiver | SFP 1550nm 120km SMF Bulk Wholesale | HYTOPTODEVICE

HYTOPTODEVICE supplies Arista SFP-1G-EZX-120 compatible 1000BASE-EZX SFP transceivers. These modules feature 1550nm wavelength and 120km SMF transmission. They run zero-alarm on Arista EOS and support full DOM monitoring. Cost-effective and in stock, they replace expensive original modules. We offer samples, spot delivery and bulk wholesale for data center and enterprise network upgrades.
NO. Brand  Compatible P/NT Transceiver Type
1 Cisco GLC-EZX-SM-120 SFP-G85-5LD
2 Arista Networks  SFP-1G-EZX-120  SFP-G31-10LD
3 Huawei  eSFP-GE-ZX120-SM1550 SFP-G31-40LD
4 Juniper  SFP-1GE-EZX-120  SFP-G55-80LD
5 Brocade  E1MG-EZX-120 SFP-G55-100LD
Description

Arista Networks SFP-1G-EZX-120 Compatible 1000BASE-EZX Pluggable Transceiver | SFP 1550nm 120km SMF Bulk Wholesale | HYTOPTODEVICE

Product Overview
This 1000BASE-EZX transceiver is fully compatible with Arista SFP-1G-EZX-120. Custom EOS adaptive firmware ensures plug-and-play operation. It runs zero-alarm on mainstream Arista switches with no extra configuration needed.
Equipped with 1550nm DFB laser chips, the module features low signal attenuation. It supports stable 120km long-distance transmission over standard G.652 single-mode fiber.
All Arista-compatible modules pass strict aging and compatibility tests. We provide sample testing, spot stock and factory wholesale to solve high cost and stock shortage issues of original modules.

Key Technical Specifications 

Arista Networks Compatible   SFP-1G-EZX-120  Vendor Name HYTOPTODEVICE
Form Factor SFP Max Data Rate 1.25Gbps
Wavelength 1550nm Max Distance 120km 
Connector Duplex LC Transmitter Type DFB 1550nm
Cable Type SMF Receiver Type APD
TX Power 1~5dBm Receiver Sensitivity < -32.0dBm
Typical Power Consumption ≤1W Receiver Overload -8dBm
Bit Error Ratio (BER) 1E-12 DDM/DOM Support
Protocols SFF-8472 MSA Compliant, IEEE 802.3ah-2004 Operation Temperature 0 to 70°C (32 to 158°F)

Usage Guidelines & Best Practices

  • Fiber Choice: Use Single-Mode Fiber (SMF) only. Do NOT use MMF
  • Laser Safety: Never look directly into optical ports or fiber ends.
  • ESD Safety:: Wear an anti-static wrist strap before handling.
  • Connector Match: UPC/PC polish only. Do NOT use APC

  • Cleanliness & Dust: Keep dust caps on all unused ports and connectors at all times. Clean fiber end-faces with a optical cleaning pen before insertion; dust causes over 80% of optical link failures.

  • Optical Attenuator Required for Short Links: For testing or short-distance connections (<10 km), connect a 15dB–20dB optical attenuator to the RX port to prevent damaging the receiver.

  • Installation & Hot-Swap Rules:MSA hot-swappable. Insert/remove gently without powering down.

  • High Loss/Packet Drops: Check fiber bend radius (>30 mm); inspect optical power levels; clean optical connectors 

  • No Link: Swap TX/RX fiber connections; clean fiber end-faces; verify port settings.

     Links to the Datasheet, User Guide and Compatibility Guides are available on the product page.

Full Compatibility List and Supported Devices

1. Supported Hardware & Firmware

This Arista-compatible transceiver uses EOS-tailored firmware. It fixes common issues like unrecognized modules, system alarms and firmware conflicts, supporting new and legacy EOS versions.
  • Arista 7000/7200/7300 Series Data Center Switches
  • Arista 7100/7500 Series High-Performance Switches
  • All Arista devices with standard SFP gigabit slots running EOS system

2. Multi-Brand Cross Compatibility

This 1000BASE-EZX pluggable transceiver follows universal MSA standards, realizing stable interconnection with Cisco, H3C, Juniper and other mainstream devices to solve multi-brand network adaptation problems.

3. Free Value-Added Services

We provide professional customization for bulk optical transceiver module orders, including firmware adaptation and custom labeling, meeting personalized procurement demands for compatible optical modules.


Main Application Scenarios

  • 120km Data Center Backbone Networking: Ideal for cross-site data center interconnection and long-distance backbone links.
  • Distributor Bulk Stocking: Cost-effective bulk supply helps wholesalers reduce inventory pressure and cost.
  • Network Distance Upgrade: Upgrade short-range modules to 120km long-haul modules to extend Arista network transmission range.
  • Remote Branch Interconnection: Stable 1550nm long-distance links connect distributed data centers and enterprise branch networks.

Connectivity Solutions(Applications) 

1.1GbE Switch-to-Switch Connectivity
Factory wholesale compatible 1000BASE-ZX 120km pluggable transceiver module for long haul network deployment

2.1GbE Switch to Media Converter Connectivity1550nm 120km SMF long range gigabit pluggable transceiver cheap bulk order for switch devices

3.1G Structured Cabling
Cost-effective long-haul 120km pluggable transceiver bulk procurement solution for enterprise network upgrade


The Core Feature

1. Low-Power, Cost-Effective Long-Haul Connectivity

Designed for high-reliability data center networks, this 1.25G 1550nm optical module supports long-reach transmission up to 120km. Featuring low power consumption and high cost-efficiency, it is the ideal choice for expanding your Gigabit Ethernet coverage.

HYTOPTODEVICE 1000BASE-EZX 120km SMF pluggable transceiver module with low power consumption


2.
Host-Tested for Proven Interoperability

All transceiver modules pass real device testing. Pre-flashed EEPROM ensures zero-alarm recognition, fixing third-party module incompatibility and link flapping for safe bulk purchase.Specific Compatibility Video available upon request.

Plug-and-play  1000base-zx replacement pluggable transceiver zero-error compatible with switches and routers


3.100% Tested for Zero-Defect Reliability

Step inside our  Test Center  to see every optical module is 100% tested before shipment, ensuring zero-defect reliability and maximum uptime for your network.

HYTOPTODEVICE bulk 120km SFP ZX  pluggable transceiver wholesale with 100% test


FAQ

Q1: What causes intermittent link drops for Arista 120km EZX long-haul fiber connections?
A: Intermittent disconnections mostly stem from contaminated port interfaces or faulty single-mode fiber cables. Check real-time DDM data on Arista EOS. Abnormal optical power fluctuations are the main sign of unstable long-distance links.

Q2: How to fix SFP module loose connection on Arista gigabit switch slots?

A: Slot dust and improper insertion lead to poor contact. Clean the slot thoroughly, then insert the module vertically until a clear locking click is heard. Avoid forced insertion to prevent physical damage.

Q3: Are Arista compatible 120km transceivers suitable for frequent hot-swap maintenance?

A: Absolutely. These modules adopt reinforced latch structures. They pass repeated plugging aging tests, maintaining stable contact and normal link status after frequent hot-swap operations.

Q4:
Why LC fiber jumpers cannot lock tightly with Arista SFP-1G-EZX-120 modules?
A: Loose locking is caused by aging jumpers, dirty end faces or mismatched connector types. Only standard clean UPC jumpers fit perfectly to ensure tight, stable fiber connection.

Q5: Do third-party compatible modules fit high-density Arista data center switch deployments?

A: Fully applicable. Strict MSA standard size ensures seamless fitting for high-density switch ports. Reserved heat dissipation space avoids overcrowding issues in dense cabinet deployment.

Q6: How does high cabinet ambient temperature affect 120km long-haul transceiver operation?
A: Sustained high temperature causes laser power attenuation and random packet loss. Optimized internal heat dissipation structure ensures stable transmission performance in high-temperature cabinet environments.

Q7: Can Arista EZX 120km modules maintain stable links in outdoor low-temperature scenarios?

A: Yes. Each module undergoes professional low-temperature calibration. It supports smooth cold start and consistent 120km transmission performance in low-temperature outdoor cabinet environments.

Q8: How to protect long-range SFP modules in humid coastal salt-fog environments?
A: Humidity and salt fog corrode module interfaces and laser components. Use dust caps for idle ports and sealed cabinets. Custom industrial-grade modules are available for harsh coastal deployment.

Q9: Does large-scale dense installation trigger overheating for 120km Arista transceivers?

A: No. Low-power laser chips and efficient heat conduction design eliminate local heat accumulation. Modules run stably even in fully dense batch installation scenarios.

Q10: Why do built-in DDM monitoring data differ from external optical test results?
A: Tiny data deviation is normal. Large errors come from dirty ports or uncalibrated test tools. Our modules support high-precision factory calibration for accurate real-time DDM monitoring.

Q11: Can DDM real-time monitoring warn of potential 120km fiber link failures in advance?

A: Yes. The system monitors optical power, temperature and voltage in real time. It triggers threshold alerts to help users pre-judge faults and avoid unexpected long-haul link outages.

Q12: What causes delayed DDM data synchronization on Arista EOS network management platforms?

A: Data delay relates to switch polling cycle and system bandwidth. Optimized module communication protocols ensure fast, consistent DDM data sync with Arista EOS systems.

Q13: Do third-party Arista compatible modules support full DDM diagnostic functions on EOS?
A: Fully supported. Strictly compliant with SFF-8472 standards, the modules retain complete DDM functions. They achieve full-data real-time diagnosis and perfect adaptation to Arista EOS management systems.

Q14:
Why cheap generic long-haul SFP modules suffer premature aging and failure?
A: Low-cost modules use uncalibrated lasers and poor heat dissipation structures. Our products pass 72-hour continuous aging tests, supporting stable 24/7 long-term data center operation.

Q15: How to avoid ESD static damage to Arista 120km long-distance transceiver modules?

A: Static discharge can burn internal laser chips and disable links. Built-in professional ESD protection circuits effectively resist static damage, extending module service life in daily operation.

Packaging Options & Custom‑Packaging Solutions

Every transceiver module gets reliable ESD‑safe packaging out of the box. Standard packing is ready for immediate shipment, while custom‑printed packaging with your logo is available for bulk orders.


Why Network Engineers Choose HYTOPTODEVICE
 

HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.

  • 100% MSA-compliant modules with Cisco, Huawei,Dell,Juniper, and Arista compatibility
  • ISO 9001:2015 certified manufacturing facility in Shenzhen
  • Average lead time of 3–5 business days with DHL/FedEx express options
  • Dedicated pre-sales engineering support for custom configurations
  • Actual hardware,actual switches,actual results.we publish compatibility test video,eliminate compatibility anxiety. you can watch before you buy. 
  • We can provide inspection and shipping videos to make you feel as if you are right here with the product.


"We replaced 200 Cisco-branded SFPs with HYTOPTODEVICE equivalents across our spine layer — zero compatibility issues, 40% cost reduction."— Network Architect, Tier-2 ISP, Germany


Quality Certification & Compliance

 At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final inspection, our processes ensure global compliance and reliability.

We adhere to rigorous standards for our SFP modules and network solutions:

  • ISO 9001: Certified quality management and production consistency.

  • CE & FCC: Fully compliant for seamless Global Market Access.

  • RoHS: Committed to environmental responsibility and hazardous material control.

  • Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.

Certified Quality. Global Standards. Guaranteed Performance.




Rigorous Industrial Product Testing

   

100% 3rd Party Compatible

Partial Test Demonstration

Others

  • Arista Networks SFP-1G-EZX-120 Compatible 1000BASE-EZX Pluggable Transceiver | SFP 1550nm 120km SMF Bulk Wholesale | HYTOPTODEVICE
  • Arista SFP-1G-EZX-120 compatible pluggable transceiver
  • 1000BASE-EZX 120km SMF SFP pluggable transceiver
  • 1550nm long-range gigabit pluggable transceiver
  • ,buy Arista compatible pluggable transceiver in bulk

Download