• HYTOPTODEVICE Brocade 10G-SFPP-LRM compatible 10G SFP+ LRM optic delivers 10GBASE‑LRM 1310nm
  • Low‑energy SFP+ 10G LRM transceiver for large‑scale Brocade switch deployment over multimode cables
  • Pre‑coded zero‑warning SFP+ 10G LRM transceiver built for Brocade switching platforms with multimode infrastructure"
  • hytoptodevice sfp+ 10g lrm module 1310nm 220m smf for Brocade switch
  • HYTOPTODEVICE Brocade 10G-SFPP-LRM compatible 10G SFP+ LRM optic delivers 10GBASE‑LRM 1310nm
  • Low‑energy SFP+ 10G LRM transceiver for large‑scale Brocade switch deployment over multimode cables
  • Pre‑coded zero‑warning SFP+ 10G LRM transceiver built for Brocade switching platforms with multimode infrastructure"
  • hytoptodevice sfp+ 10g lrm module 1310nm 220m smf for Brocade switch

Brocade 10G-SFPP-LRM Compatible 10G SFP+ LRM Transceiver | 10GBASE-LRM 1310nm 220m MMF Bulk & Wholesale | HYTOPTODEVICE

HYTOPTODEVICE Brocade 10G‑SFPP‑LRM compatible 10G SFP+ LRM optic runs 10GBASE‑LRM at 1310 nm up to 220 m over multimode fiber. Pre‑programmed EEPROM for Brocade switches with DDM support, cost‑effective third‑party replacement for legacy multimode‑fiber 10G network upgrades.  Price: From $1.00 (Bulk Quote Available) | In Stock
NO. Brand  Compatible P/N Transceiver Type
1 Cisco SFP-10G-LRM  SFP-10G-SR
2 Arista Networks  SFP-10G-LRM  SFP-10G-LR
3  H3C  SFP-XG-LRM-MM1310  SFP-10G-ER
4 HPE ProCure J9152A SFP-10G-ZR
5 HPE Aruba J9152D
6 HPE BladeSystem 455889-B21
7 Huawei  OSXD22N00 
8 Dell 330-2403 
9 Juniper  EX-SFP-10GE-LRM
10 Brocade  10G-SFPP-LRM 



Description

Brocade 10G-SFPP-LRM Compatible 10G SFP+ LRM Transceiver | 10GBASE‑LRM 1310nm 220m MMF Bulk Wholesale

Product Overview

HYTOPTODEVICE 10G SFP+ LRM serves as drop‑in replacement for Brocade 10G‑SFPP‑LRM. Compliant with 10GBASE‑LRM standard, it operates at 1310 nm wavelength and reaches up to 220‑meter over multimode fiber.
This hot‑pluggable SFP+ transceiver supports DDM digital optical monitoring. Its EEPROM is pre‑flashed for Brocade hardware to avoid unrecognized‑transceiver alarms. It is an ideal upgrade solution for existing multimode‑cabling networks moving to 10G speed without full cable re‑installation.
Each unit passes optical performance and temperature screening before shipment. Bulk wholesale and custom coding services are available for system integrators and distributors.

Key Technical Specifications
 
Brocade Compatible 10G-SFPP-LRM  Vendor Name HYTOPTODEVICE
Form Factor SFP+ Max Data Rate 10.3125Gbps
Wavelength 1310nm Max  Distance 220m@OM3/300m@SMF
Connector Duplex LC Transmitter Type 1310nm FP
Cable Type 50/125µm@OM3 MMF, 9/125μm@SMF Receiver Type PIN
TX Power -6.5~-0.5dBm Receiver Sensitivity < -10.0dBm
Power Consumption ≤1W Receiver Overload 1.5dBm
Protocols IEEE 802.3ae, SFF-8472, SFF-8431, SFF-8432, SFP+ MSA Compliant, CPRI, eCPRI Operation Temperature 0 to 70°C (32 to 158°F)

 For detailed technical specifications, please refer to the Datasheet

Usage Guidelines & Best Practices

  • Fiber Compatibility: Supports OM1–OM4 multimode and OS2 single-mode fiber (max 220 m). A Mode Conditioning Patch Cord (MCP) is mandatory on the TX port for legacy OM1/OM2 fiber to prevent signal degradation.

  • Maintenance & Polarity: Clean LC connectors before insertion to avoid signal loss. Ensure correct polarity—always map the MCP single-mode leg to the TX port.

  • Distance & Link Budget: Maximum distance is strictly 220 m across all fiber types. Excessive splices, patch panels, or sharp bends will reduce range.

  • Thermal Management: Power consumption is ≤1W , operating standardly at 0°C to 70°C without auxiliary cooling.

  • Industrial Grade Option: For outdoor or harsh environments with extreme temperatures, select industrial-grade (-40°C to 85°C) modules.

For detailed operation instructions, please refer to the User Guide.

Full Compatibility List & Supported Network Hardware

1. Supported Hardware & Firmware

HYTOPTODEVICE 10G‑SFPP‑LRM‑compatible SFP+ LRM comes with Brocade‑specific EEPROM profile. It eliminates transceiver‑warning logs on matching Brocade network hardware.

Validated Brocade Platforms:
  • Brocade VDX series enterprise switches
  • Brocade ICX series data center switches with SFP+ slots
  • Brocade MLX‑XR series enterprise routers
  • Other Brocade gear accepting original 10G‑SFPP‑LRM optics

2. Multi-Brand Cross Compatibility

Built on MSA SFP+ standard, this 10G SFP+ LRM also works on other major‑brand network hardware. Contact HYTOPTODEVICE sales team if you need EEPROM re‑coding for multi‑vendor mixed‑fabric environments.

3. Free Value-Added Services

HYTOPTODEVICE offers competitive bulk pricing for resellers, system integrators and data center contractors. We provide free special compatible EEPROM reprogramming for all bulk orders.
Available options include private label printing, custom packaging and deployment consulting. All modules pass optical calibration, temperature cycling and 72-hour full-traffic burn-in. Large-volume orders enjoy tiered discounts to reduce project CAPEX.

Primary Application Scenarios

  • Enterprise campus 10G upgrade re‑using existing multimode fiber
  • Data center rack‑to‑rack short‑range 10G interconnections
  • Brocade switch stacking and aggregation uplink deployment
  • System‑integrator bulk project procurement
  • Legacy multimode‑cabling network renovation

Connectivity Solutions(Applications)

1. 10G to 10G for Switch-Switch Interconnection

10G‑to‑10G switch‑to‑switch trunk built with Brocade‑compatible SFP+ 10G LRM transceiver over multimode fiber

2.10G for Switch-Media Converter

Fiber interconnection using SFP+ 10G LRM transceiver between switch and media converter within data‑center premises

3.10G for Switch to NIC

10G uplink from  top‑of‑rack switch to server SFP+ NIC using multimode fiber plant

4.10G Structured Cabling Deployment

Enterprise multimode LC structured cabling deployment with mass‑installed SFP+ 10G LRM transceiver modules

The Core Feature 

1.10G High-Density & Ultra-Low Power Connectivity

Low‑power high‑density SFP+ 10G LRM transceiver delivers budget‑friendly 10‑gigabit upgrade paths for Brocade‑centered networks. It lets operators reuse existing older multimode cabling for incremental network expansion.

Power‑saving high‑density SFP+ 10G LRM transceiver for multimode fiber reuse in  data‑center 10G upgrade


2.
Verified Host Interoperability

Each production batch gets real‑hardware testing on Brocade devices. Pre‑loaded matching EEPROM enables smooth plug‑and‑play, no unsupported‑transceiver alerts under normal operation.
Real‑hardware interoperability lab validation for HPE ProCure‑compatible SFP+ 10G LRM module

3.Rigorous Testing, Uncompromising Reliability

All modules pass multi‑step optical‑performance checks, thermal cycling and burn‑in aging. Built‑in DDM lets operators view real‑time module status and simplify on‑site troubleshooting.

72‑hour full‑rate traffic burn‑in reliability screening for bulk batches of SFP+ 10G LRM transceiver

 

FAQ

Q1: Can SFP‑10G‑LRM run over Single‑Mode Fiber (SMF)?
A: Yes. Our HYTOPTODEVICE Brocade‑compatible 10G LRM uses a 1310nm laser source which differs from 850nm‑based 10G‑SR optics. This wavelength characteristic allows it to operate across single‑mode fiber, delivering stable connectivity up to 300 meters over standard SMF infrastructure.

Q2: Why choose LRM over SR for campus network upgrades?
A: Many enterprise campuses still have legacy OM1 orange multimode cables pre‑installed between buildings. Standard 10G‑SR optics can only sustain 10G speeds for roughly 33 meters on this old fiber type. Our Brocade‑compatible LRM module extends usable reach to 220 meters, enabling affordable 10G migration without recabling the whole campus.

Q3: Do all switch ports support SFP‑10G‑LRM and EDC?
A: Compatibility depends on the host port hardware. LRM relies on the port’s built‑in EDC signal processing capability. Some early‑generation 10G SFP+ ports lack this PHY feature, so our LRM transceiver cannot initialize and work properly on those ports.

Q4: Can SFP‑10G‑LRM communicate directly with an SFP‑10G‑LR module?
A: Inter‑working is possible under certain conditions. Both our LRM and standard 10G‑LR transceivers adopt 1310nm lasers, so they can establish links across single‑mode fiber out to 300 meters. Even so, running mixed‑module setups for permanent production traffic is not recommended due to potential link stability risks.

Q5: Can SFP‑10G‑LRM communicate directly with an SFP‑10G‑SR module?
A: You cannot establish stable end‑to‑end links by pairing LRM and SR optics. 10G‑SR works at 850 nm while our LRM runs on 1310 nm. Such fundamental wavelength mismatch results in heavy packet loss and link failure regardless of fiber type used.

Q6: Does SFP‑10G‑LRM generate more heat than SFP‑10G‑SR?
A: It will produce slightly higher operating heat. Inside our HYTOPTODEVICE LRM transceiver sits an integrated EDC chip for signal dispersion compensation. This extra signal‑handling function adds minor power draw, so the module runs marginally warmer compared to conventional 10G‑SR units during continuous operation.

Q7: Why is my SFP‑10G‑LRM link flapping intermittently?
A: Intermittent link flapping mostly originates from field‑side cabling conditions rather than module defects. Usual triggers include contaminated LC end faces, missing MCP patch cords for aged multimode fiber runs, excessive splice loss or abnormal received optical power. Our built‑in DDM monitoring helps technicians quickly pinpoint these physical‑layer issues.

Q8: How can I perform a loopback test on SFP‑10G‑LRM?
A: To run a loopback validation for our Brocade‑compatible LRM module, insert it into an active SFP+ port, then connect Tx and Rx ports using a duplex LC loopback jumper. Check switch port status together with DDM readouts. A persistent port‑up state and normal power readings confirm the transceiver passes hardware inspection.

Q9: Should I install SFP‑10G‑LRM for a brand‑new building buildout?
A: LRM is not the best pick for completely new cabling deployments. Its core value lies in re‑using aged multimode fiber for network renovation projects. For newly‑installed cabling infrastructure, 10G‑SR or 10G‑LR deliver better overall cost‑efficiency and matching performance.

Q10: Why are SFP‑10G‑LRM modules more expensive than SFP‑10G‑SR?
A: Price gaps come from hardware complexity and test requirements. Our LRM transceivers incorporate 1310 nm laser components plus EDC dispersion compensation circuitry. Each unit undergoes strict optical calibration and aging screening. By comparison, 10G‑SR leverages mature low‑cost 850 nm technology, making LRM a higher‑value solution for legacy‑fiber upgrade scenarios.
Packaging & Custom OEM Solutions

Our 10G SFP+ LRM module comes sealed in standard anti-static (ESD-safe) packaging, pre-stocked and ready for immediate shipment. For bulk orders, we offer custom OEM packaging—including logo printing and private labeling—tailored for network distributors, system integrators, and enterprise deployments.
HYTOPTODEVICE sfp-10g-sr optical transceiver module custom package


Why Network Engineers Choose HYTOPTODEVICE

HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
  • Up to 70% cost savings vs OEM, transparent pricing & flexible bulk rates, supported quality returns
  • 100% real-device compatible with Cisco, Huawei,Dell,Juniper, and Arista
  • ISO 9001:2015 Shenzhen factory, full lineup: 1.25G/10G/25G/40G/100G/200G/400G/800G/1.6T transceivers
  • Ample stock, fast global DHL/FedEx shipping in 3–5 working days
  • Free pre-sales engineering support for custom EEPROM  & private label firmware
  • Real switch test videos available for pre-purchase review; inspection & shipping videos provided per order

“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia


Quality Certification & Compliance

 At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.

We adhere to rigorous standards for our SFP modules and network solutions:

  • ISO 9001: Certified quality management and production consistency.

  • CE & FCC: Fully compliant for seamless Global Market Access.

  • RoHS: Committed to environmental responsibility and hazardous material control.

  • Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.

Certified Quality. Global Standards. Guaranteed Performance.




Rigorous Industrial Product Testing

   hytoptodevice check device and equiptment for optical transceiver module

100% 3rd Party Compatible
hytoptodevice 100g qsfp28 sr4 replacement
Partial Test Demonstration
hytoptodevice compatible optical transceiver module for ethernet,data center

Others
HYTOPTODEVICE 100G QSFP28 TRANSCEIVER sr4 application for data center,ethernet

 



 

 

 

  • HYTOPTODEVICE Brocade 10G-SFPP-LRM compatible 10G SFP+ LRM optic delivers 10GBASE‑LRM 1310nm
  • Low‑energy SFP+ 10G LRM transceiver for large‑scale Brocade switch deployment over multimode cables
  • Pre‑coded zero‑warning SFP+ 10G LRM transceiver built for Brocade switching platforms with multimode infrastructure"
  • hytoptodevice sfp+ 10g lrm module 1310nm 220m smf for Brocade switch

Download