• HYTOPTODEVICE Cisco SFP‑1G‑SX compatible 1000BASE‑SX SFP transceiver,850nm 550m MMF
  • Cisco SFP-1G-SX Compatible 1000BASE-SX SFP Optical Transceiver Module | 850nm 550m Duplex LC/UPC MMF Bulk Wholesale | HYTOPTODEVICE
  • HYTOPTODEVICE hot‑swappable Cisco SFP‑1G‑SX compatible gigabit fiber optic transceiver
  • hytoptodevice gigabit multimode sfp for ethernet switch
  • HYTOPTODEVICE Cisco SFP‑1G‑SX compatible 1000BASE‑SX SFP transceiver,850nm 550m MMF
  • Cisco SFP-1G-SX Compatible 1000BASE-SX SFP Optical Transceiver Module | 850nm 550m Duplex LC/UPC MMF Bulk Wholesale | HYTOPTODEVICE
  • HYTOPTODEVICE hot‑swappable Cisco SFP‑1G‑SX compatible gigabit fiber optic transceiver
  • hytoptodevice gigabit multimode sfp for ethernet switch

Cisco SFP-1G-SX Compatible 1000BASE-SX SFP Optical Transceiver Module | 850nm 550m Duplex LC/UPC MMF Bulk Wholesale | HYTOPTODEVICE

High-performance sfp transceiver with 550m reach over MMF. SFP  form factor, Duplex LC connector,100% compatible with Cisco SFP-1G-SX and other mainstream brands. No firmware changes needed,right out of the box. Equivalent to the OEM,Save more brand premium for your project. see the compatible list.
NO. Brand  Compatible P/N Transceiver Type
1 Cisco SFP-1G-SX SFP-G31-10LD
2 Arista Networks  SFP-1G-SX  SFP-G31-40LD
3 Huawei   eSFP-GE-SX-MM850 SFP-G55-80LD
4 Juniper  EX-SFP-1GE-SX SFP-G55-100LD
5 Brocade  E1MG-SX-OM SFP-G55-160LD

Description

Cisco SFP‑1G‑SX Compatible 1000BASE‑SX SFP Optical Transceiver Module | 850nm 550m Duplex LC/UPC MMF Bulk Wholesale | HYTOPTODEVICE

Product Overview

 The SFP-1G-SX is a high-performance, Cisco-compatible  sfp optical transceiver. Featuring a hot-pluggable SFP form factor, it operates at a fixed 1Gbps line rate over a 850nm wavelength to transmit data, transmission up to 550m over multi-mode fiber (MMF) vias Duplex LC connector. With high-density networking and low power consumption, this optical module provides highly stable Internet Service Provider (ISP) Gigabit Ethernet communication links, Enterprise LAN & SAN Networks, Data Center LAN & SAN Networks and other optical links. Compliant with both the SFP Multi-Source Agreement (MSA) and IEEE 802.3ah-2004. DOM supported.

Key Technical Specifications

Cisco Compatible   SFP-1G-SX Vendor Name HYTOPTODEVICE
Form Factor SFP Max Data Rate 1.25Gbps
Wavelength 850nm Max Distance 550m over OM2 MMF
Connector Duplex LC Transmitter Type 850nm VCSEL
Cable Type MMF Receiver Type PIN
TX Power -9.0~-3dBm Receiver Sensitivity < -18.0dBm
Typical Power Consumption ≤0.8W Receiver Overload -3dBm
Bit Error Ratio (BER) 1E-12 DDM/DOM Supported
Protocols SFF-8472 MSA Compliant, IEEE 802.3ah-2004 Operation Temperature 0°C to 70°C (32 to 158°F)

Usage Guidelines & Best Practices

  • Fiber Choice: Duplex LC OM1/OM2/OM3/OM4 MMF (50 or 62.5/125 µm). Do NOT use SMF (OS1/OS2).

  • Connector Match: UPC/PC polish only. Do NOT use APC.

  • Cleanliness & Dust: Keep dust caps on whenever unattached. Clean fiber end-faces with a optical cleaning pen before insertion; dust causes over 80% of optical link failures.

  • Link Setup:Lock speed to 1.25Gbps (Full Duplex) manually if auto-negotiation fails.

  • Handling: Wear ESD protection. Keep fiber bend radius ≥ 30 mm.

  • Installation & Hot-Swap Rules:MSA hot-swappable. Insert/remove gently without powering down.

  • Environment:Commercial grade (0°C to 70°C). Avoid extreme heat, moisture, and dust.

     Links to the Datasheet, User Guide and Compatibility Guides are available on the product page.


Full Compatibility List and Supported Devices 

1. Supported Hardware & Firmware
  • Cisco Catalyst 2960 Series: WS-C2960-24TC-L, WS-C2960G-24TC-L, WS-C2960S-48FPD-L, WS-C2960X-24PD-L

  • Cisco Catalyst 3560 & 3650 Series: WS-C3560G-24TS, WS-C3560X-48T-S, WS-C3650-24TD-E

  • Cisco Catalyst 3750 & 3850 Series: WS-C3750G-48TS, WS-C3750X-24T-S, WS-C3850-24T-E

  • Cisco Catalyst 9200 & 9300 Series: C9200-24T, C9200L-48P-4X, C9300-24T, C9300-48U

  • Cisco ASR & ISR Router Series: ASR 901, ASR 1001-X, ISR 4331, ISR 4451-X

  • Cisco Nexus Series: Nexus 3048, Nexus 93180YC-FX

2. Multi-Brand Cross Compatibility

Fully MSA‑compliant, this 1000BASE‑SX SFP transceiver achieves stable interoperability with third‑party brand gigabit switches, routers and media converters. Ideal for mixed‑vendor enterprise local‑area network deployment.

3. Free Value-Added Services

  • Custom firmware for multi-device compatibility
  • Free sample testing before bulk orders
  • Complete test reports for project acceptance
  • Strict batch consistency quality control
  • Free custom EEPROM programming for special and legacy network environments


Main Application Scenarios 

  • Intra-Data Center Connections: Patching core switches to top-of-rack (ToR) or end-of-row (EoR) servers within the same or adjacent server racks.

  • Local Enterprise Local Area Networks (LANs): Linking desktop workstations, distribution switches, and multi-floor office building backbones using multi-mode fiber infrastructure.

  • Campus Building Interconnects: Bridging closely situated structures, labs, or warehouses within a campus cluster where the distance is under 550 meters.

  • Storage Area Networks (SAN): Interconnecting high-speed network storage arrays and storage controllers directly into the data matrix.


Connectivity Solutions(Applications) 

1.1GbE Switch-to-Switch Connectivity
HYTOPTODEVICE 1000BASE‑SX gigabit SFP multimode optical module Duplex LC UPC for switch to switch

2.1GbE Switch to Media Converter ConnectivityHYTOPTODEVICE DDM‑enabled SFP‑1G‑SX compatible SFP transceiver for enterprise LAN

3.1GbE Structured Cabling Interconnect

HYTOPTODEVICE 850nm VCSEL 1000BASE‑SX SFP module for intra‑rack data‑center connection

4.1GbE Switch-to-NIC Interconnection

HYTOPTODEVICE hot‑swappable SFP‑1G‑SX compatible gigabit fiber optic transceiver for structured cabling

The Core Feature

1. High-Efficiency 1G Data Center Interconnect

Engineered for high-density network environments, our SFP-GE-SX modules deliver plug-and-play 1GbE performance with ultra-low power dissipation—offering a budget-friendly, eco-conscious solution for your daily networking needs.

HYTOPTODEVICE cost‑effective 1G multimode SFP transceiver bulk wholesale OM2 OM3 OM4


2.
Zero-Downtime Reliability & 100% Brand Compatibility

Rest assured with optical transceivers rigorously benchmarked on over 150+ major brand host switches in our testing lab. Verify your setup instantly via our compatibility sheet—or request a custom, switch-specific Compatibility Video before you buy.

HYTOPTODEVICE plug‑and‑play 1000BASE‑SX SFP for Cisco Catalyst switch short‑range links


3.Lab-Certified Quality, Built for Zero Failures

Every transceiver is stress-tested on advanced optoelectronic diagnostics to guarantee signal integrity and long-term stability. Experience full transparency—take a virtual tour of our Test Center to see our Quality Assurance process in action.

HYTOPTODEVICE factory‑supply 1000BASE‑SX SFP for legacy gigabit network upgrade


FAQ

Q1: What is the maximum distance supported by the Cisco SFP-1G-SX compatible module?
A: It supports up to 275m over legacy OM1 (62.5/125µm) fiber, up to 550m over standard OM2 (50/125µm) fiber, and up to 1km over optimized OM3/OM4 laser-optimized multi-mode fiber.

Q2: Do I need to use an optical attenuator with this short-range module?

A: No, you do not need an attenuator. The output power is intentionally mapped for short distances and will not saturate or damage the receiver.

Q3: What is the difference between SFP-1G-SX and GLC-SX-MMD?

A: Both offer identical 1G 850nm 550m multi-mode performance, but the GLC-SX-MMD variant includes Digital Optical Monitoring (DOM) telemetry, whereas the standard historical SFP-1G-SX often does not.

Q4: What wavelength does the SFP-1G-SX operate on?
A: It operates on a short-wave 850nm infrared light spectrum.

Q5: Can I use this transceiver with Single-Mode Fiber (SMF) patch cables?
A: No, it is designed exclusively for Multi-Mode Fiber (MMF). Using single-mode fiber will cause massive light loss and the link will stay down.

Q6: Is the SFP-1G-SX hot-swappable?
A: Yes, it is fully hot-pluggable. You can insert or extract the module without taking down the host hardware switch.

Q7: What is the optical power budget for Cisco SFP‑1G‑SX compatible 1000BASE‑SX SFP transceiver?
A: HYTOPTODEVICE Cisco SFP‑1G‑SX compatible 1000BASE‑SX SFP provides typical 9 dB optical power budget, covering insertion loss for OM1‑OM4 multimode fiber links within specification distance.


Q8: What is the transmit optical power range of 1000BASE‑SX gigabit multimode SFP?

A: HYTOPTODEVICE Cisco SFP‑1G‑SX compatible SFP features transmit optical power from ‑9.5 dBm to ‑3 dBm, strictly calibrated per IEEE 802.3z gigabit SX standards.

Q9: How does different multimode fiber grade affect real‑world transmission distance for 1000BASE‑SX SFP?
A: HYTOPTODEVICE 1000BASE‑SX SFP reaches 550 m over OM2‑OM4 MMF, only 275 m over legacy OM1 multimode fiber. Actual reach depends on fiber modal bandwidth.

Q10: What BER performance can I expect from compatible Cisco SFP‑1G‑SX gigabit SFP module?
A: HYTOPTODEVICE Cisco SFP‑1G‑SX compatible 1000BASE‑SX SFP guarantees BER ≤1×10⁻¹² complying with IEEE gigabit Ethernet requirements under qualified multimode fiber links.

Q11: What are common root causes for unstable flapping gigabit multimode fiber links with SFP‑1G‑SX modules? A: HYTOPTODEVICE experience shows flapping links mostly come from dirty LC end‑faces, excessive cable bending radius or mismatched fiber grade. Clean connectors and check cabling specifications for troubleshooting.

Q12: Are low‑cost generic 1000BASE‑SX SFP modules reliable for long‑term enterprise LAN deployment?
A: Low‑cost generic gigabit SFP often skip burn‑in and DOM calibration. HYTOPTODEVICE Cisco SFP‑1G‑SX compatible SFP passes full‑batch aging test and comes with 5‑year warranty for stable long‑term LAN operation.

Q13: Does Cisco‑compatible SFP‑1G‑SX 1000BASE‑SX SFP support hot‑swap operation?
A: Yes. HYTOPTODEVICE Cisco SFP‑1G‑SX compatible SFP follows MSA SFP specification and supports hot‑swap, you can plug/unplug modules without switch power‑off for LAN maintenance.

Q14: Can commercial‑grade 1000BASE‑SX SFP run inside unconditioned outdoor wiring cabinet?
A: No. HYTOPTODEVICE commercial‑grade Cisco SFP‑1G‑SX SFP works within 0‑70℃. For unconditioned outdoor cabinets, select our optional industrial‑temperature‑grade‑40~85℃ version.

Q15: Is HYTOPTODEVICE Cisco SFP‑1G‑SX compatible 1000BASE‑SX SFP RoHS and CE certified?
A: Yes. HYTOPTODEVICE Cisco SFP‑1G‑SX compatible 1000BASE‑SX SFP meets RoHS‑2.0, CE and FCC certifications, supporting global enterprise‑project shipment and customs clearance.


Packaging Options & Custom‑Packaging Solutions

Every transceiver module gets reliable ESD‑safe packaging out of the box. Standard packing is ready for immediate shipment, while custom‑printed packaging with your logo is available for bulk orders.


Why Network Engineers Choose HYTOPTODEVICE

HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.

  • 100% MSA-compliant modules with Cisco, Huawei,Dell,Juniper, and Arista compatibility
  • ISO 9001:2015 certified manufacturing facility in Shenzhen
  • Average lead time of 3–5 business days with DHL/FedEx express options
  • Dedicated pre-sales engineering support for custom configurations
  • Actual hardware,actual switches,actual results.we publish compatibility test video,eliminate compatibility anxiety. you can watch before you buy. 
  • We can provide inspection and shipping videos to make you feel as if you are right here with the product.


"We replaced 200 Cisco-branded SFPs with HYTOPTODEVICE equivalents across our spine layer — zero compatibility issues, 40% cost reduction."— Network Architect, Tier-2 ISP, Germany


Quality Certification & Compliance

 At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final inspection, our processes ensure global compliance and reliability.

We adhere to rigorous standards for our SFP modules and network solutions:

  • ISO 9001: Certified quality management and production consistency.

  • CE & FCC: Fully compliant for seamless Global Market Access.

  • RoHS: Committed to environmental responsibility and hazardous material control.

  • Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.

Certified Quality. Global Standards. Guaranteed Performance.




Rigorous Industrial Product Testing

   

100% 3rd Party Compatible

Partial Test Demonstration


  • HYTOPTODEVICE Cisco SFP‑1G‑SX compatible 1000BASE‑SX SFP transceiver,850nm 550m MMF
  • Cisco SFP-1G-SX Compatible 1000BASE-SX SFP Optical Transceiver Module | 850nm 550m Duplex LC/UPC MMF Bulk Wholesale | HYTOPTODEVICE
  • HYTOPTODEVICE hot‑swappable Cisco SFP‑1G‑SX compatible gigabit fiber optic transceiver
  • hytoptodevice gigabit multimode sfp for ethernet switch

Download