• Cisco GLC-EZX-SM-100 Compatible 1000BASE-EZX Optical Transceiver | SFP 1550nm 100km SMF Bulk Wholesale | HYTOPTODEVICE
  • Cisco GLC-EZX-SM-100 compatible optical transceiver from hytoptodevice
  • 1000BASE-EZX 100km SMF SFP optical transceiver from hytoptodevice
  • 1550nm long range gigabit optical transceiver
  • ,buy affordable Cisco compatible optical transceiver from hytoptodevice
  • Cisco GLC-EZX-SM-100 Compatible 1000BASE-EZX Optical Transceiver | SFP 1550nm 100km SMF Bulk Wholesale | HYTOPTODEVICE
  • Cisco GLC-EZX-SM-100 compatible optical transceiver from hytoptodevice
  • 1000BASE-EZX 100km SMF SFP optical transceiver from hytoptodevice
  • 1550nm long range gigabit optical transceiver
  • ,buy affordable Cisco compatible optical transceiver from hytoptodevice

Cisco GLC-EZX-SM-100 Compatible 1000BASE-EZX Optical Transceiver | SFP 1550nm 100km SMF Bulk Wholesale | HYTOPTODEVICE

HYTOPTODEVICE offers factory wholesale Cisco GLC-EZX-SM-100 compatible optical transceiver. This 1000BASE-EZX 1550nm 100km SMF SFP optical transceiver delivers zero-alarm Cisco compatibility and full DOM monitoring. It solves common procurement pain points including expensive original optical transceiver costs, stock shortages and firmware incompatibility, supporting plug-and-play deployment and low-MOQ bulk orders. Private label, custom EEPROM programming and OEM available for global importers, distributors, wholesaler and system integrators.
NO. Brand  Compatible P/N Transceiver Type
1 Cisco GLC-EZX-SM-100 SFP-G85-5LD
2 Arista Networks SFP-1G-EZX-100  SFP-G31-10LD
3 Huawei  eSFP-GE-ZX100-SM1550 SFP-G31-40LD
4 Juniper Networks  SFP-1GE-EZX-100  SFP-G55-80LD
5 Brocade  E1MG-EZX-100 SFP-G55-120LD
6 HPE H3C  JD103A SFP-G55-160LD
7 H3C  SFP-GE-LH100-SM1550
8 Dell SFP-EZX-100 
9 Extreme Networks  10064H
10 Ruijie  MINI-GBIC-ZX100-SM1550 
Description

Cisco GLC-EZX-SM-100  Compatible 1000BASE-ZX  Optical Transceiver | SFP 1550nm 100km SMF Bulk Wholesale | HYTOPTODEVICE

Product Overview
HYTOPTODEVICE 1000BASE-EZX optical transceiver is fully compatible with Cisco GLC-EZX-SM-100. Featuring customized adaptive firmware, it ensures zero-alarm recognition and plug-and-play operation on all mainstream Cisco switches and routers with no extra configuration.
Built with premium 1550nm DFB laser chips, this SFP optical transceiver delivers ultra-low signal attenuation, supporting stable 100km ultra-long transmission over standard G.652 single-mode fiber for enterprise backbone networking.
All Cisco-compatible optical transceivers undergo strict aging and compatibility tests for reliable link performance. We offer sample testing and factory bulk wholesale, solving high costs and stock shortages of original Cisco modules.

Key Technical Specifications 

Cisco Compatible   GLC-EZX-SM-100  Vendor Name HYTOPTODEVICE
Form Factor SFP Max Data Rate 1.25Gbps
Wavelength 1550nm Max Distance 100km 
Connector Duplex LC Transmitter Type DFB 1550nm
Cable Type SMF Receiver Type APD
TX Power 0~5dBm Receiver Sensitivity < -30.0dBm
Typical Power Consumption ≤1W Receiver Overload -8dBm
Bit Error Ratio (BER) 1E-12 DDM/DOM Support
Protocols SFF-8472 MSA Compliant, IEEE 802.3ah-2004 Operation Temperature 0 to 70°C (32 to 158°F)

Usage Guidelines & Best Practices

  • Fiber Choice: Use Single-Mode Fiber (SMF) only. Do NOT use MMF
  • Laser Safety: Never look directly into optical ports or fiber ends.
  • ESD Safety:: Wear an anti-static wrist strap before handling.
  • Connector Match: UPC/PC polish only. Do NOT use APC

  • Cleanliness & Dust: Keep dust caps on all unused ports and connectors at all times. Clean fiber end-faces with a optical cleaning pen before insertion; dust causes over 80% of optical link failures.

  • Optical Attenuator Required for Short Links: For testing or short-distance connections (<10 km), connect a 15dB–20dB optical attenuator to the RX port to prevent damaging the receiver.

  • Installation & Hot-Swap Rules:MSA hot-swappable. Insert/remove gently without powering down.

  • High Loss/Packet Drops: Check fiber bend radius (>30 mm); inspect optical power levels; clean optical connectors 

  • No Link: Swap TX/RX fiber connections; clean fiber end-faces; verify port settings.

     Links to the Datasheet, User Guide and Compatibility Guides are available on the product page.

Full Compatibility List and Supported Devices

1. Supported Hardware & Firmware

HYTOPTODEVICE Cisco GLC-EZX-SM-100 compatible optical transceiver adopts adaptive firmware tailored for Cisco devices. It fixes common faults including unrecognized optical transceivers, system alarms and firmware update incompatibility, fitting new and legacy Cisco firmware versions.
  • Cisco Catalyst 2960/3560/3750/3850/9300 Series Switches
  • Cisco ISR/ASR Series Routers & Firewall Devices
  • All Cisco devices with standard SFP gigabit slots

2. Multi-Brand Cross Compatibility

This 1000BASE-EZX optical transceiver follows universal MSA standards, realizing stable interconnection with Cisco, H3C, Brocade and other mainstream devices to solve multi-brand network adaptation problems.

3. Free Value-Added Services

We provide professional customization for bulk optical transceiver module orders, including firmware adaptation and custom labeling, meeting personalized procurement demands for compatible optical modules.


Main Application Scenarios

  • Ultra-Long-Haul Backbone Networking: 100km Cisco-compatible optical transceiver for cross-city and remote regional fiber link deployment to extend network coverage.
  • Network Distributor Bulk Stocking: Cost-effective optical transceiver bulk supply lowers inventory costs for network equipment wholesalers and suppliers.
  • Cisco Network Distance Upgrade: Replace short-range modules with 100km long-haul optical transceivers to break original network transmission distance limits.
  • Remote Campus & Branch Links: Low-loss 1550nm optical transceiver stabilizes signal transmission for long-distance connection of enterprise branches and remote campuses.

Connectivity Solutions(Applications) 

1.1GbE Switch-to-Switch Connectivity
Factory wholesale compatible 1000BASE-ZX 100km optical transceiver module for long haul network deployment

2.1GbE Switch to Media Converter Connectivity1550nm 100km SMF long range gigabit optical transceiver module cheap bulk order for switch devices

3.1G Structured Cabling
Cost-effective long-haul 100km transceiver module bulk procurement solution for enterprise network upgrade


The Core Feature

1. Low-Power, Cost-Effective Long-Haul Connectivity

Designed for high-reliability data center networks, this 1.25G 1550nm SFP transceiver module supports long-reach transmission up to 80km. Featuring low power consumption and high cost-efficiency, it is the ideal choice for expanding your Gigabit Ethernet coverage.

HYTOPTODEVICE 1000BASE-EZX 100km SMF optical transceiver module with low power consumption


2.
Host-Tested for Proven Interoperability

All transceiver modules pass real device testing. Pre-flashed EEPROM ensures zero-alarm recognition, fixing third-party module incompatibility and link flapping for safe bulk purchase.Specific Compatibility Video available upon request.

Plug-and-play  1000base-zx replacement module zero-error compatible with switches and routers


3.100% Tested for Zero-Defect Reliability

Step inside our  Test Center  to see every optical module is 100% tested before shipment, ensuring zero-defect reliability and maximum uptime for your network.

HYTOPTODEVICE bulk 80km SFP ZX optical module wholesale with 100% test


FAQ

Q1: Are Cisco GLC-EZX-SM-100 compatible optical transceivers plug-and-play? A: Yes. Our self-adaptive firmware matches Cisco device verification rules strictly. This optical transceiver runs stably on Cisco switches and routers out of the box with zero alarms, no manual configuration required.

Q2: Will Cisco system firmware updates affect third-party optical transceivers?
A: We continuously optimize EEPROM data to adapt to latest Cisco system iterations. This compatible optical transceiver can be normally identified and operate steadily after device upgrades, avoiding offline failures.

Q3: Does this 100km long-haul optical transceiver support hot-swap?
A: It supports standard hot-plug functionality. The optical transceiver can be replaced online without powering off devices, greatly reducing network maintenance downtime and operation risks.

Q4: Is the 1000BASE-EZX optical transceiver applicable for non-Ethernet networks?
A: No. This optical transceiver is professionally calibrated for gigabit Ethernet transmission only. It does not support Fibre Channel, CPRI and other protocols to prevent network conflicts.

Q5: Can this Cisco optical transceiver work in mixed-brand network environments?
A: Fully MSA-compliant, this optical transceiver features universal compatibility and stable interconnection with H3C, Huawei and other devices, adapting to diverse multi-vendor network architectures.

Q6: Can I reconfigure optical transceiver parameters for new devices?
A: We provide free EEPROM recoding and firmware customization. You can adjust optical transceiver parameters to match new network hardware and eliminate compatibility barriers.

Q7: How to fix unstable 100km long-haul network links?
A: Every optical transceiver undergoes strict laser calibration and high-temperature aging tests. Precise wavelength control effectively suppresses signal drift, solving long-distance jitter and packet loss issues.

Q8: How to solve optical power saturation for short-distance deployment?
A: For links below 20km, install a 5-7dB attenuator to balance transmit power. It avoids signal saturation bit errors and protects the long-haul optical transceiver laser components.

Q9: What fiber and interface does this Cisco optical transceiver use?
A: It adopts duplex LC UPC interface, matched with standard G.652 single-mode fiber. The matching combination minimizes transmission loss for reliable 100km ultra-long networking.

Q10: Why is APC jumper prohibited for this 100km optical transceiver?
A: This optical transceiver is optimized for UPC end faces. APC jumpers cause serious signal reflection and extra attenuation, leading to unstable links and data errors in ultra-long transmission.

Q11: Do bulk optical transceiver orders include protective accessories?
A: Yes. All finished optical transceivers are equipped with dust caps to protect optical ports from dust, scratches and contamination during delivery and storage.

Q12: What is the correct port cleaning method for optical transceivers?
A: Use professional fiber cleaning sticks for LC port maintenance. Ordinary wipes will leave residues or scratch laser surfaces, causing increased attenuation and intermittent network failures.

Q13: Is industrial temperature customization available?
A: Standard optical transceivers support 0℃~70℃ commercial environments. We provide industrial-grade customization for extreme temperature outdoor and industrial networking scenarios.

Q14: Will temperature changes affect 1550nm 100km optical transceiver performance?
A: Our calibrated laser modules control wavelength drift within standard ranges. The optical transceiver maintains stable optical power and consistent transmission quality under fluctuating temperatures.

Q15: Do high-power 100km optical transceivers have overheating risks?
A: Adopting optimized internal heat dissipation design, these high-power optical transceivers dissipate heat efficiently, ensuring stable operation even in high-density rack deployment.

Packaging Options & Custom‑Packaging Solutions

Every transceiver module gets reliable ESD‑safe packaging out of the box. Standard packing is ready for immediate shipment, while custom‑printed packaging with your logo is available for bulk orders.


Why Network Engineers Choose HYTOPTODEVICE
 

HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.

  • 100% MSA-compliant modules with Cisco, Huawei,Dell,Juniper, and Arista compatibility
  • ISO 9001:2015 certified manufacturing facility in Shenzhen
  • Average lead time of 3–5 business days with DHL/FedEx express options
  • Dedicated pre-sales engineering support for custom configurations
  • Actual hardware,actual switches,actual results.we publish compatibility test video,eliminate compatibility anxiety. you can watch before you buy. 
  • We can provide inspection and shipping videos to make you feel as if you are right here with the product.


"We replaced 200 Cisco-branded SFPs with HYTOPTODEVICE equivalents across our spine layer — zero compatibility issues, 40% cost reduction."— Network Architect, Tier-2 ISP, Germany


Quality Certification & Compliance

 At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final inspection, our processes ensure global compliance and reliability.

We adhere to rigorous standards for our SFP modules and network solutions:

  • ISO 9001: Certified quality management and production consistency.

  • CE & FCC: Fully compliant for seamless Global Market Access.

  • RoHS: Committed to environmental responsibility and hazardous material control.

  • Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.

Certified Quality. Global Standards. Guaranteed Performance.




Rigorous Industrial Product Testing

   

100% 3rd Party Compatible

Partial Test Demonstration

Others

  • Cisco GLC-EZX-SM-100 Compatible 1000BASE-EZX Optical Transceiver | SFP 1550nm 100km SMF Bulk Wholesale | HYTOPTODEVICE
  • Cisco GLC-EZX-SM-100 compatible optical transceiver from hytoptodevice
  • 1000BASE-EZX 100km SMF SFP optical transceiver from hytoptodevice
  • 1550nm long range gigabit optical transceiver
  • ,buy affordable Cisco compatible optical transceiver from hytoptodevice

Download