• HYTOPTODEVICE Huawei OSXD22N00 compatible 10G SFP+ LRM optic delivers 10GBASE‑LRM 1310nm
  • Low‑energy SFP+ 10G LRM transceiver for large‑scale Huawei switch deployment over multimode cables
  • Pre‑coded zero‑warning SFP+ 10G LRM transceiver built for Huawei switching platforms with multimode infrastructure"
  • hytoptodevice sfp+ 10g lrm module 1310nm 220m smf for switch
  • HYTOPTODEVICE Huawei OSXD22N00 compatible 10G SFP+ LRM optic delivers 10GBASE‑LRM 1310nm
  • Low‑energy SFP+ 10G LRM transceiver for large‑scale Huawei switch deployment over multimode cables
  • Pre‑coded zero‑warning SFP+ 10G LRM transceiver built for Huawei switching platforms with multimode infrastructure"
  • hytoptodevice sfp+ 10g lrm module 1310nm 220m smf for switch

Huawei OSXD22N00 Compatible 10G SFP+ LRM Transceiver | 10GBASE-LRM 1310nm 220m MMF Bulk & Wholesale | HYTOPTODEVICE

HYTOPTODEVICE Huawei OSXD22N00 compatible 10G SFP+ LRM optic delivers 10GBASE‑LRM 1310nm performance up to 220m over multimode fiber. Pre‑programmed for Huawei switches, supports DDM monitoring, cost‑saving third‑party solution for multimode‑based 10G network upgrades.  Price: From $1.00 (Bulk Quote Available) | In Stock
NO. Brand  Compatible P/N Transceiver Type
1 Cisco SFP-10G-LRM  SFP-10G-SR
2 Arista Networks  SFP-10G-LRM  SFP-10G-LR
3  H3C  SFP-XG-LRM-MM1310  SFP-10G-ER
4 HPE ProCure J9152A SFP-10G-ZR
5 HPE Aruba J9152D
6 HPE BladeSystem 455889-B21
7 Huawei  OSXD22N00 
8 Dell 330-2403 
9 Juniper  EX-SFP-10GE-LRM
10 Brocade  10G-SFPP-LRM 




Description

Huawei OSXD22N00 455889-B21 Compatible SFP+ 10G LRM Transceiver | 10GBASE‑LRM 1310nm 220m MMF Bulk Wholesale

Product Overview

HYTOPTODEVICE 10G SFP+ LRM transceiver serves as drop‑in replacement for Huawei OSXD22N00. It follows 10GBASE‑LRM standard, running at 1310 nm wavelength over multimode fiber for max 220‑meter reach.
This hot‑pluggable SFP+ unit supports DDM digital monitoring. Its EEPROM is pre‑flashed for Huawei hardware, so you avoid unrecognized‑transceiver alarms. It is a practical choice when upgrading existing multimode‑cabling networks to 10G speed without cable re‑installation.
Each module passes optical and temperature screening before shipment. Bulk wholesale and custom coding services are available for system integrators and distributors.

Key Technical Specifications
 
Huawei Compatible OSXD22N00  Vendor Name HYTOPTODEVICE
Form Factor SFP+ Max Data Rate 10.3125Gbps
Wavelength 1310nm Max  Distance 220m@OM3/300m@SMF
Connector Duplex LC Transmitter Type 1310nm FP
Cable Type 50/125µm@OM3 MMF, 9/125μm@SMF Receiver Type PIN
TX Power -6.5~-0.5dBm Receiver Sensitivity < -10.0dBm
Power Consumption ≤1W Receiver Overload 1.5dBm
Protocols IEEE 802.3ae, SFF-8472, SFF-8431, SFF-8432, SFP+ MSA Compliant, CPRI, eCPRI Operation Temperature 0 to 70°C (32 to 158°F)

 For detailed technical specifications, please refer to the Datasheet

Usage Guidelines & Best Practices

  • Fiber Compatibility: Supports OM1–OM4 multimode and OS2 single-mode fiber (max 220 m). A Mode Conditioning Patch Cord (MCP) is mandatory on the TX port for legacy OM1/OM2 fiber to prevent signal degradation.

  • Maintenance & Polarity: Clean LC connectors before insertion to avoid signal loss. Ensure correct polarity—always map the MCP single-mode leg to the TX port.

  • Distance & Link Budget: Maximum distance is strictly 220 m across all fiber types. Excessive splices, patch panels, or sharp bends will reduce range.

  • Thermal Management: Power consumption is ≤1W , operating standardly at 0°C to 70°C without auxiliary cooling.

  • Industrial Grade Option: For outdoor or harsh environments with extreme temperatures, select industrial-grade (-40°C to 85°C) modules.

For detailed operation instructions, please refer to the User Guide.

Full Compatibility List & Supported Network Hardware

1. Supported Hardware & Firmware

HYTOPTODEVICE OSXD22N00‑compatible SFP+ LRM comes with Huawei‑specific EEPROM profile. It eliminates transceiver‑warning logs on matching Huawei switches and firewalls.

Validated Huawei Platforms:
  • Huawei S5700 / S6700 enterprise switch series
  • Huawei CE‑series data center switches with SFP+ slots
  • Huawei AR‑series enterprise routers
  • Other Huawei gear accepting OSXD22N00 original optics

2. Multi-Brand Cross Compatibility

Built on MSA SFP+ standard, this 10G SFP+ LRM also works on other major‑brand network hardware. Contact HYTOPTODEVICE sales team if you need EEPROM re‑coding for multi‑vendor mixed‑fabric environments.

3. Free Value-Added Services

HYTOPTODEVICE offers competitive bulk pricing for resellers, system integrators and data center contractors. We provide free special compatible EEPROM reprogramming for all bulk orders.
Available options include private label printing, custom packaging and deployment consulting. All modules pass optical calibration, temperature cycling and 72-hour full-traffic burn-in. Large-volume orders enjoy tiered discounts to reduce project CAPEX.

Primary Application Scenarios

  • Enterprise campus 10G upgrade re‑using existing multimode fiber
  • Data center rack‑to‑rack short‑range 10G interconnections
  • Huawei switch stacking and aggregation uplink deployment
  • System‑integrator bulk project procurement
  • Legacy multimode‑cabling network renovation

Connectivity Solutions(Applications)

1. 10G to 10G for Switch-Switch Interconnection

10G‑to‑10G switch‑to‑switch trunk built with Huawei‑compatible SFP+ 10G LRM transceiver over multimode fiber

2.10G for Switch-Media Converter

Fiber interconnection using SFP+ 10G LRM transceiver between Huawei switch and media converter within data‑center premises

3.10G for Switch to NIC

10G uplink from Huawei top‑of‑rack switch to server SFP+ NIC using multimode fiber plant

4.10G Structured Cabling Deployment

Enterprise multimode LC structured cabling deployment with mass‑installed SFP+ 10G LRM transceiver modules

The Core Feature 

1.10G High-Density & Ultra-Low Power Connectivity

Low‑power high‑density SFP+ 10G LRM transceiver delivers budget‑friendly 10‑gigabit upgrade paths for Huawei‑centered networks. It lets operators reuse existing older multimode cabling for incremental network expansion.

Power‑saving high‑density SFP+ 10G LRM transceiver for multimode fiber reuse in  data‑center 10G upgrade


2.
Verified Host Interoperability

Each production batch gets real‑hardware testing on Huawei devices. Pre‑loaded OSXD22N00‑matching EEPROM enables smooth plug‑and‑play, no unsupported‑transceiver alerts under normal operation.
Real‑hardware interoperability lab validation for HPE ProCure‑compatible SFP+ 10G LRM module

3.Rigorous Testing, Uncompromising Reliability

All modules pass multi‑step optical‑performance checks, thermal cycling and burn‑in aging. Built‑in DDM lets operators view real‑time module status and simplify on‑site troubleshooting.

72‑hour full‑rate traffic burn‑in reliability screening for bulk batches of SFP+ 10G LRM transceiver

 

FAQ
Q1: What makes SFP‑10G‑LRM2 different from standard SFP‑10G‑LRM?
A: LRM2 is an upgraded version of standard LRM, featuring higher tolerance for modal dispersion that commonly occurs on low-quality and legacy multimode fiber. Both LRM and LRM2 adopt 1310nm working wavelength and support both SMF and MMF fiber types. Compared with regular LRM modules, LRM2 delivers longer effective transmission distance and much more stable optical signal for complex old cabling environments.


Q2: Why select LRM instead of SR for campus‑wide 10G network roll‑outs?
A: LRM supports longer reach over existing multimode cabling compared with SR‑type optics. You can finish campus‑network 10G upgrades without tearing out original building cabling, greatly lowering total project expense.

Q3: What purpose does a Mode Conditioning Patch (MCP) cord serve in LRM links?
A: An MCP cord adjusts laser launch conditions going into older multimode fiber. It reduces modal dispersion and suppress DMD‑caused signal distortion, delivering more stable 10G performance for legacy‑cable links.

Q4: Which physical connector does SFP‑10G‑LRM transceiver adopt?
A: HYTOPTODEVICE Huawei OSXD22N00 compatible 10G SFP+ LRM uses duplex LC connector. The compact form fits well with high‑density switch ports and mainstream structured fiber‑cabling systems.

Q5: Do I need an optical attenuator for short 2‑meter LRM patch‑cable connections?
A: An attenuator is unnecessary for typical 2‑meter short‑jumper scenarios. Transmit power of our LRM module stays within safe receiving range. Only add attenuator when DDM reports unusually high received optical power values.

Q6: What is the maximum optical‑power overload limit for 10GBASE‑LRM transceivers?
A: Per 10GBASE‑LRM specification, the overload threshold stands at +0.5 dBm. Received power higher than this value may trigger signal saturation, bit‑error spikes or unstable link status. You can track power readings via DDM monitoring function.

Q7: Can I install a 10G SFP+ LRM module inside a native 1G SFP‑only slot?
A: It will not work. SFP+ 10G LRM uses different electrical interface and rate logic. It cannot downgrade to 1G speed, so 1G‑only SFP ports cannot recognize or initialize this transceiver.

Q8: What causes third‑party LRM optics to get rejected by Cisco network equipment?
A: Cisco devices check built‑in EEPROM signature by default. Generic third‑party modules without matching coded data trigger transceiver rejection and port lockdown. HYTOPTODEVICE can provide custom‑coded versions for Cisco hardware upon request.

Q9: What maximum distance can SFP‑10G‑LRM achieve over OM1 62.5/125µm multimode fiber?
A: On OM1 multimode fiber, maximum stable reach is 220 m within standard loss budget. We strongly recommend using mode‑conditioning patch cords for full‑distance OM1 runs to counter modal‑noise interference.

Q10: Is valid operation possible when running SFP‑10G‑LRM on OS1 or OS2 single‑mode fiber?
A: SFP‑10G‑LRM is designed exclusively for multimode fiber. Even though wavelength is 1310 nm, its laser launch profile does not suit single‑mode media. You cannot establish usable stable links over OS1/OS2 fiber.

Q11: Does the 10G SFP+ LRM transceiver support hot‑swap operation?
A: Yes. It complies with SFF‑8431 hot‑swap standards. You may plug or remove the module while host devices keep running, helping reduce network‑maintenance downtime.

Q12: What factors lead to intermittent link flapping on LRM‑based fiber links?
A: Common triggers include dirty or scratched LC end faces, missing MCP cords for old OM1/OM2 cable, excessive splice loss, optical power out‑of‑range, or outdated device firmware. Check DDM readouts to speed‑up fault location.

Q13: How should I clean the optical port of an SFP‑10G‑LRM transceiver properly?
A: Disable the corresponding port first. Use a professional LC fiber‑cleaning pen for one‑direction wiping. Do not use paper tissue or ordinary alcohol swabs, these may scratch optical surfaces. Re‑inspect cleanliness before reconnecting fiber jumpers.

Packaging & Custom OEM Solutions

Our SFP+ 10G LRM module comes sealed in standard anti-static (ESD-safe) packaging, pre-stocked and ready for immediate shipment. For bulk orders, we offer custom OEM packaging—including logo printing and private labeling—tailored for network distributors, system integrators, and enterprise deployments.
HYTOPTODEVICE sfp-10g-sr optical transceiver module custom package


Why Network Engineers Choose HYTOPTODEVICE

HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
  • Up to 70% cost savings vs OEM, transparent pricing & flexible bulk rates, supported quality returns
  • 100% real-device compatible with Cisco, Huawei,Dell,Juniper, and Arista
  • ISO 9001:2015 Shenzhen factory, full lineup: 1.25G/10G/25G/40G/100G/200G/400G/800G/1.6T transceivers
  • Ample stock, fast global DHL/FedEx shipping in 3–5 working days
  • Free pre-sales engineering support for custom EEPROM  & private label firmware
  • Real switch test videos available for pre-purchase review; inspection & shipping videos provided per order

“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia


Quality Certification & Compliance

 At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.

We adhere to rigorous standards for our SFP modules and network solutions:

  • ISO 9001: Certified quality management and production consistency.

  • CE & FCC: Fully compliant for seamless Global Market Access.

  • RoHS: Committed to environmental responsibility and hazardous material control.

  • Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.

Certified Quality. Global Standards. Guaranteed Performance.




Rigorous Industrial Product Testing

   hytoptodevice check device and equiptment for optical transceiver module

100% 3rd Party Compatible
hytoptodevice 100g qsfp28 sr4 replacement
Partial Test Demonstration
hytoptodevice compatible optical transceiver module for ethernet,data center

Others
HYTOPTODEVICE 100G QSFP28 TRANSCEIVER sr4 application for data center,ethernet

 



 

 

 

  • HYTOPTODEVICE Huawei OSXD22N00 compatible 10G SFP+ LRM optic delivers 10GBASE‑LRM 1310nm
  • Low‑energy SFP+ 10G LRM transceiver for large‑scale Huawei switch deployment over multimode cables
  • Pre‑coded zero‑warning SFP+ 10G LRM transceiver built for Huawei switching platforms with multimode infrastructure"
  • hytoptodevice sfp+ 10g lrm module 1310nm 220m smf for switch

Download