• HYTOPTODEVICE Juniper EX-SFP-10GE-LRM compatible 10G SFP+ LRM optic delivers 10GBASE‑LRM 1310nm
  • Low‑energy SFP+ 10G LRM transceiver for large‑scale Juniper switch deployment over multimode cables
  • Pre‑coded zero‑warning SFP+ 10G LRM transceiver built for Juniper switching platforms with multimode infrastructure"
  • hytoptodevice sfp+ 10g lrm module 1310nm 220m smf for juniper switch
  • HYTOPTODEVICE Juniper EX-SFP-10GE-LRM compatible 10G SFP+ LRM optic delivers 10GBASE‑LRM 1310nm
  • Low‑energy SFP+ 10G LRM transceiver for large‑scale Juniper switch deployment over multimode cables
  • Pre‑coded zero‑warning SFP+ 10G LRM transceiver built for Juniper switching platforms with multimode infrastructure"
  • hytoptodevice sfp+ 10g lrm module 1310nm 220m smf for juniper switch

Juniper EX-SFP-10GE-LRM Compatible 10G SFP+ LRM Transceiver | 10GBASE-LRM 1310nm 220m MMF Bulk & Wholesale | HYTOPTODEVICE

HYTOPTODEVICE Juniper EX‑SFP‑10GE‑LRM compatible 10G SFP+ LRM optic delivers 10GBASE‑LRM performance at 1310 nm up to 220 m over multimode fiber. Pre‑programmed for Juniper switches with DDM support, cost‑saving third‑party solution for enterprise multimode‑fiber 10G upgrades.  Price: From $1.00 (Bulk Quote Available) | In Stock
NO. Brand  Compatible P/N Transceiver Type
1 Cisco SFP-10G-LRM  SFP-10G-SR
2 Arista Networks  SFP-10G-LRM  SFP-10G-LR
3  H3C  SFP-XG-LRM-MM1310  SFP-10G-ER
4 HPE ProCure J9152A SFP-10G-ZR
5 HPE Aruba J9152D
6 HPE BladeSystem 455889-B21
7 Huawei  OSXD22N00 
8 Dell 330-2403 
9 Juniper  EX-SFP-10GE-LRM
10 Brocade  10G-SFPP-LRM 




Description

Juniper EX-SFP-10GE-LRM Compatible 10G SFP+ LRM Transceiver | 10GBASE‑LRM 1310nm 220m MMF Bulk Wholesale

Product Overview

HYTOPTODEVICE 10G SFP+ LRM serves as drop‑in replacement for Juniper EX‑SFP‑10GE‑LRM. It follows 10GBASE‑LRM standard, running at 1310 nm wavelength over multimode fiber for max 220‑meter reach.
This hot‑pluggable SFP+ unit supports DDM digital monitoring. Its EEPROM is pre‑flashed for Juniper hardware, so you avoid unrecognized‑transceiver alarms. It is a practical choice when upgrading existing multimode‑cabling networks to 10G speed without cable re‑installation.
Each module passes optical and temperature screening before shipment. Bulk wholesale and custom coding services are available for system integrators and distributors.

Key Technical Specifications
 
Juniper Compatible EX-SFP-10GE-LRM  Vendor Name HYTOPTODEVICE
Form Factor SFP+ Max Data Rate 10.3125Gbps
Wavelength 1310nm Max  Distance 220m@OM3/300m@SMF
Connector Duplex LC Transmitter Type 1310nm FP
Cable Type 50/125µm@OM3 MMF, 9/125μm@SMF Receiver Type PIN
TX Power -6.5~-0.5dBm Receiver Sensitivity < -10.0dBm
Power Consumption ≤1W Receiver Overload 1.5dBm
Protocols IEEE 802.3ae, SFF-8472, SFF-8431, SFF-8432, SFP+ MSA Compliant, CPRI, eCPRI Operation Temperature 0 to 70°C (32 to 158°F)

 For detailed technical specifications, please refer to the Datasheet

Usage Guidelines & Best Practices

  • Fiber Compatibility: Supports OM1–OM4 multimode and OS2 single-mode fiber (max 220 m). A Mode Conditioning Patch Cord (MCP) is mandatory on the TX port for legacy OM1/OM2 fiber to prevent signal degradation.

  • Maintenance & Polarity: Clean LC connectors before insertion to avoid signal loss. Ensure correct polarity—always map the MCP single-mode leg to the TX port.

  • Distance & Link Budget: Maximum distance is strictly 220 m across all fiber types. Excessive splices, patch panels, or sharp bends will reduce range.

  • Thermal Management: Power consumption is ≤1W , operating standardly at 0°C to 70°C without auxiliary cooling.

  • Industrial Grade Option: For outdoor or harsh environments with extreme temperatures, select industrial-grade (-40°C to 85°C) modules.

For detailed operation instructions, please refer to the User Guide.

Full Compatibility List & Supported Network Hardware

1. Supported Hardware & Firmware

HYTOPTODEVICE EX‑SFP‑10GE‑LRM‑compatible SFP+ LRM comes with Juniper‑specific EEPROM profile. It eliminates transceiver‑warning logs on matching Juniper switches and firewalls.

Validated Juniper Platforms:
  • Juniper EX‑series enterprise switches
  • Juniper QFX‑series data center switches with SFP+ slots
  • Juniper MX‑series enterprise routers
  • Other Juniper gear accepting EX‑SFP‑10GE‑LRM original optics

2. Multi-Brand Cross Compatibility

Built on MSA SFP+ standard, this 10G SFP+ LRM also works on other major‑brand network hardware. Contact HYTOPTODEVICE sales team if you need EEPROM re‑coding for multi‑vendor mixed‑fabric environments.

3. Free Value-Added Services

HYTOPTODEVICE offers competitive bulk pricing for resellers, system integrators and data center contractors. We provide free special compatible EEPROM reprogramming for all bulk orders.
Available options include private label printing, custom packaging and deployment consulting. All modules pass optical calibration, temperature cycling and 72-hour full-traffic burn-in. Large-volume orders enjoy tiered discounts to reduce project CAPEX.

Primary Application Scenarios

  • Enterprise campus 10G upgrade re‑using existing multimode fiber
  • Data center rack‑to‑rack short‑range 10G interconnections
  • Juniper switch stacking and aggregation uplink deployment
  • System‑integrator bulk project procurement
  • Legacy multimode‑cabling network renovation

Connectivity Solutions(Applications)

1. 10G to 10G for Switch-Switch Interconnection

10G‑to‑10G switch‑to‑switch trunk built with Juniper‑compatible SFP+ 10G LRM transceiver over multimode fiber

2.10G for Switch-Media Converter

Fiber interconnection using SFP+ 10G LRM transceiver between switch and media converter within data‑center premises

3.10G for Switch to NIC

10G uplink from  top‑of‑rack switch to server SFP+ NIC using multimode fiber plant

4.10G Structured Cabling Deployment

Enterprise multimode LC structured cabling deployment with mass‑installed SFP+ 10G LRM transceiver modules

The Core Feature 

1.10G High-Density & Ultra-Low Power Connectivity

Low‑power high‑density SFP+ 10G LRM transceiver delivers budget‑friendly 10‑gigabit upgrade paths for Juniper‑centered networks. It lets operators reuse existing older multimode cabling for incremental network expansion.

Power‑saving high‑density SFP+ 10G LRM transceiver for multimode fiber reuse in  data‑center 10G upgrade


2.
Verified Host Interoperability

Each production batch gets real‑hardware testing on Juniper Networks devices. Pre‑loaded matching EEPROM enables smooth plug‑and‑play, no unsupported‑transceiver alerts under normal operation.
Real‑hardware interoperability lab validation for HPE ProCure‑compatible SFP+ 10G LRM module

3.Rigorous Testing, Uncompromising Reliability

All modules pass multi‑step optical‑performance checks, thermal cycling and burn‑in aging. Built‑in DDM lets operators view real‑time module status and simplify on‑site troubleshooting.

72‑hour full‑rate traffic burn‑in reliability screening for bulk batches of SFP+ 10G LRM transceiver

 

FAQ

Q1: Can SFP-10G-LRM run over Single-Mode Fiber (SMF)?
A: Yes. Our HYTOPTODEVICE 10G LRM modules adopt 1310nm laser transmitters, differing from conventional 850nm 10G-SR optics. This unique wavelength design enables the module to support single-mode fiber transmission, with a stable transmission distance of up to 300 meters on standard SMF links.

Q2: Why choose LRM over SR for campus network upgrades?
A: For campus networks deployed with legacy OM1 62.5/125µm orange multimode fiber, traditional 10G-SR modules only support ultra-short transmission of about 33 meters and cannot meet cross-building networking demands. Our Juniper-compatible 10G LRM module perfectly adapts to aging OM1 fiber, stably reaching 220 meters, enabling low-cost 10G upgrades by reusing original cabling resources.

Q3: Do all switch ports support SFP-10G-LRM and EDC?
A: Not all switch ports are compatible. Normal operation of 10G LRM modules relies on the host port’s built-in EDC electronic dispersion compensation function. Some early-generation low-end 10G SFP+ switch ports lack EDC chip processing capability, which will cause our LRM modules to fail to initialize and work normally after insertion.

Q4: Can SFP-10G-LRM communicate directly with an SFP-10G-LR module?
A: Interconnection is conditionally achievable. Both our 10G LRM module and 10G-LR module adopt 1310nm laser wavelength, supporting effective data communication over single-mode fiber with a maximum distance of 300 meters. Nevertheless, mixed deployment of different types of optical modules is not recommended for long-term formal business operation to avoid potential link instability risks.

Q5: Can SFP-10G-LRM communicate directly with an SFP-10G-SR module?
A: Cross communication between 10G-LRM and 10G-SR modules cannot form stable links. 10G-SR uses 850nm short wavelength, while our Juniper-compatible LRM module adopts 1310nm long wavelength with dedicated multimode transmission algorithms. The fundamental wavelength and signal mechanism mismatch will cause serious packet loss and link downtime, making normal data transmission impossible.

Q6: Does SFP-10G-LRM generate more heat than SFP-10G-SR?
A: Yes, it runs slightly warmer. Different from ordinary 10G-SR modules, The 10G LRM modules are equipped with built-in EDC electronic dispersion compensation chips. The additional signal compensation processing function brings slight power consumption increase, resulting in a marginally higher operating temperature than standard SR modules during long-term operation.

Q7: Why is my SFP-10G-LRM link flapping intermittently?
A: Intermittent link flapping of LRM modules is mostly caused by on-site wiring environment issues rather than product quality problems. Common causes include dirty or scratched LC end faces, missing MCP cords for aging multimode fiber, excessive fiber splicing loss, and abnormal optical power. Our modules support real-time DDM monitoring, helping engineers quickly locate and resolve link faults.

Q8: How can I perform a loopback test on SFP-10G-LRM?
A: Loopback testing for our Juniper-compatible 10G LRM modules is simple and efficient. Insert the module into a normal switch SFP+ port, use a standard duplex LC loopback jumper to connect the module’s transmit and receive ports. Observe the port status and DDM data. Stable UP port status and normal optical power readings confirm that the module works perfectly without hardware failures.

Q9: Should I install SFP-10G-LRM for a brand-new building buildout?
A: It is not recommended to deploy LRM modules for new building cabling projects. Our 10G LRM is professionally optimized for legacy multimode fiber renovation scenarios. For newly laid standard cabling, 10G-SR or 10G-LR modules offer higher cost performance and better compatibility. LRM modules are more suitable for old campus and factory network 10G upgrades that reuse existing cabling.

Q10: Why are SFP-10G-LRM modules more expensive than SFP-10G-SR?
A: The price difference stems from differences in design, technology and application scenarios. Our SFP-10G-LRM modules adopt advanced 1310nm laser chips and built-in EDC dispersion compensation technology, with stricter optical calibration and aging testing processes. Supporting 220m long-distance stable transmission on old multimode fiber requires higher production standards. In contrast, 10G-SR adopts mature low-cost 850nm short-range technology, so LRM modules have higher technical cost and application value than ordinary SR modules.

Packaging & Custom OEM Solutions

Our 10G SFP+ LR module comes sealed in standard anti-static (ESD-safe) packaging, pre-stocked and ready for immediate shipment. For bulk orders, we offer custom OEM packaging—including logo printing and private labeling—tailored for network distributors, system integrators, and enterprise deployments.
HYTOPTODEVICE sfp-10g-sr optical transceiver module custom package


Why Network Engineers Choose HYTOPTODEVICE

HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
  • Up to 70% cost savings vs OEM, transparent pricing & flexible bulk rates, supported quality returns
  • 100% real-device compatible with Cisco, Huawei,Dell,Juniper, and Arista
  • ISO 9001:2015 Shenzhen factory, full lineup: 1.25G/10G/25G/40G/100G/200G/400G/800G/1.6T transceivers
  • Ample stock, fast global DHL/FedEx shipping in 3–5 working days
  • Free pre-sales engineering support for custom EEPROM  & private label firmware
  • Real switch test videos available for pre-purchase review; inspection & shipping videos provided per order


“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia


Quality Certification & Compliance

 At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.

We adhere to rigorous standards for our SFP modules and network solutions:

  • ISO 9001: Certified quality management and production consistency.

  • CE & FCC: Fully compliant for seamless Global Market Access.

  • RoHS: Committed to environmental responsibility and hazardous material control.

  • Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.

Certified Quality. Global Standards. Guaranteed Performance.




Rigorous Industrial Product Testing

   hytoptodevice check device and equiptment for optical transceiver module

100% 3rd Party Compatible
hytoptodevice 100g qsfp28 sr4 replacement
Partial Test Demonstration
hytoptodevice compatible optical transceiver module for ethernet,data center

Others
HYTOPTODEVICE 100G QSFP28 TRANSCEIVER sr4 application for data center,ethernet

 



 

 

 

  • HYTOPTODEVICE Juniper EX-SFP-10GE-LRM compatible 10G SFP+ LRM optic delivers 10GBASE‑LRM 1310nm
  • Low‑energy SFP+ 10G LRM transceiver for large‑scale Juniper switch deployment over multimode cables
  • Pre‑coded zero‑warning SFP+ 10G LRM transceiver built for Juniper switching platforms with multimode infrastructure"
  • hytoptodevice sfp+ 10g lrm module 1310nm 220m smf for juniper switch

Download