| NO. | Brand | Compatible P/N | Transceiver Type |
| 1 | Cisco | SFP-GE-Z | SFP-G85-5LD |
| 2 | Cisco | GLC-ZX-SMD | SFP-G31-10LD |
| 3 | Cisco | GLC-ZX-SM-RGD | SFP-G31-40LD |
| 4 | Arista Networks | SFP-1G-EX-80 | SFP-G55-100LD |
| 5 | H3C | SFP-GE-LH80-SM1550 | SFP-G55-120LD |
| 6 | Juniper | EX-SFP-1GE-LX70 | SFP-G55-160LD |
| 7 | Huawei | S-SFP-GE-LH80-SM1550 | |
| 8 | Brocade | E1MG-LHA |
All HYTOPTODEVICE optical transceivers pass strict compatibility and aging tests. Consistent batch quality ensures stable performance. Factory direct pricing supports sample orders and large bulk procurement for global buyers.
Key Technical Specifications
| Cisco Compatible | SFP-GE-Z | Vendor Name | HYTOPTODEVICE |
| Form Factor | SFP | Max Data Rate | 1.25Gbps |
| Wavelength | 1550nm | Max Distance | 80km |
| Connector | Duplex LC | Transmitter Type | DFB 1550nm |
| Cable Type | SMF | Receiver Type | PIN |
| TX Power | 0~5dBm | Receiver Sensitivity | < -26.0dBm |
| Typical Power Consumption | ≤1W | Receiver Overload | -1dBm |
| Bit Error Ratio (BER) | 1E-12 | DDM/DOM | Support |
| Protocols | SFF-8472 MSA Compliant, IEEE 802.3ah-2004 | Operation Temperature | 0 to 70°C (32 to 158°F) |
Usage Guidelines & Best Practices
Connector Match: UPC/PC polish only. Do NOT use APC
Cleanliness & Dust: Keep dust caps on all unused ports and connectors at all times. Clean fiber end-faces with a optical cleaning pen before insertion; dust causes over 80% of optical link failures.
Optical Attenuator Required for Short Links: For testing or short-distance connections (<10 km), connect a 10dB–15dB optical attenuator to the RX port to prevent damaging the receiver.
Installation & Hot-Swap Rules:MSA hot-swappable. Insert/remove gently without powering down.
High Loss/Packet Drops: Check fiber bend radius (>30 mm); inspect optical power levels; clean optical connectors
No Link: Swap TX/RX fiber connections; clean fiber end-faces; verify port settings.
Links to the Datasheet, User Guide and Compatibility Guides are available on the product page.
Full Compatibility List and Supported Devices
1. Supported Hardware & Firmware
Main Application Scenarios







HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
"We replaced 200 Cisco-branded SFPs with HYTOPTODEVICE equivalents across our spine layer — zero compatibility issues, 40% cost reduction."— Network Architect, Tier-2 ISP, Germany
Quality Certification & Compliance
At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final inspection, our processes ensure global compliance and reliability.
We adhere to rigorous standards for our SFP modules and network solutions:
ISO 9001: Certified quality management and production consistency.
CE & FCC: Fully compliant for seamless Global Market Access.
RoHS: Committed to environmental responsibility and hazardous material control.
Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.
Certified Quality. Global Standards. Guaranteed Performance.



