• HYTOPTODEVICE Dell compatible 10G SFP+ LRM optic delivers 10GBASE‑LRM 1310nm
  • Low‑energy SFP+ 10G LRM transceiver for large‑scale dell switch deployment over multimode cables
  • Pre‑coded zero‑warning SFP+ 10G LRM transceiver built for dell switching platforms with multimode infrastructure"
  • hytoptodevice sfp+ 10g lrm module 1310nm 220m smf for switch
  • HYTOPTODEVICE Dell compatible 10G SFP+ LRM optic delivers 10GBASE‑LRM 1310nm
  • Low‑energy SFP+ 10G LRM transceiver for large‑scale dell switch deployment over multimode cables
  • Pre‑coded zero‑warning SFP+ 10G LRM transceiver built for dell switching platforms with multimode infrastructure"
  • hytoptodevice sfp+ 10g lrm module 1310nm 220m smf for switch

Dell 330-2403 Compatible 10G SFP+ LRM Transceiver | 10GBASE-LRM 1310nm 220m MMF Bulk & Wholesale | HYTOPTODEVICE

HYTOPTODEVICE Dell 330-2403  compatible 10G SFP+ LRM optic delivers 10GBASE‑LRM 1310nm performance up to 220m over multimode fiber. Pre‑programmed for Dell switches, supports DDM monitoring, cost‑saving third‑party solution for multimode‑based 10G network upgrades.  Price: From $1.00 (Bulk Quote Available) | In Stock
NO. Brand  Compatible P/N Transceiver Type
1 Cisco SFP-10G-LRM  SFP-10G-SR
2 Arista Networks  SFP-10G-LRM  SFP-10G-LR
3  H3C  SFP-XG-LRM-MM1310  SFP-10G-ER
4 HPE ProCure J9152A SFP-10G-ZR
5 HPE Aruba J9152D
6 HPE BladeSystem 455889-B21
7 Huawei  OSXD22N00 
8 Dell 330-2403 
9 Juniper  EX-SFP-10GE-LRM
10 Brocade  10G-SFPP-LRM 




Description

Dell 330-2403 455889-B21 Compatible SFP+ 10G LRM Transceiver | 10GBASE‑LRM 1310nm 220m MMF Bulk Wholesale

Product Overview

HYTOPTODEVICE 10G SFP+ LRM transceiver serves as drop‑in replacement for Dell 330-2403 . It follows 10GBASE‑LRM standard, running at 1310 nm wavelength over multimode fiber for max 220‑meter reach.
This hot‑pluggable SFP+ unit supports DDM digital monitoring. Its EEPROM is pre‑flashed for Dell hardware, so you avoid unrecognized‑transceiver alarms. It is a practical choice when upgrading existing multimode‑cabling networks to 10G speed without cable re‑installation.
Each module passes optical and temperature screening before shipment. Bulk wholesale and custom coding services are available for system integrators and distributors.

Key Technical Specifications
 
 Dell Compatible 330-2403   Vendor Name HYTOPTODEVICE
Form Factor SFP+ Max Data Rate 10.3125Gbps
Wavelength 1310nm Max  Distance 220m@OM3/300m@SMF
Connector Duplex LC Transmitter Type 1310nm FP
Cable Type 50/125µm@OM3 MMF, 9/125μm@SMF Receiver Type PIN
TX Power -6.5~-0.5dBm Receiver Sensitivity < -10.0dBm
Power Consumption ≤1W Receiver Overload 1.5dBm
Protocols IEEE 802.3ae, SFF-8472, SFF-8431, SFF-8432, SFP+ MSA Compliant, CPRI, eCPRI Operation Temperature 0 to 70°C (32 to 158°F)

 For detailed technical specifications, please refer to the Datasheet

Usage Guidelines & Best Practices

  • Fiber Compatibility: Supports OM1–OM4 multimode and OS2 single-mode fiber (max 220 m). A Mode Conditioning Patch Cord (MCP) is mandatory on the TX port for legacy OM1/OM2 fiber to prevent signal degradation.

  • Maintenance & Polarity: Clean LC connectors before insertion to avoid signal loss. Ensure correct polarity—always map the MCP single-mode leg to the TX port.

  • Distance & Link Budget: Maximum distance is strictly 220 m across all fiber types. Excessive splices, patch panels, or sharp bends will reduce range.

  • Thermal Management: Power consumption is ≤1W , operating standardly at 0°C to 70°C without auxiliary cooling.

  • Industrial Grade Option: For outdoor or harsh environments with extreme temperatures, select industrial-grade (-40°C to 85°C) modules.

For detailed operation instructions, please refer to the User Guide.

Full Compatibility List & Supported Network Hardware

1. Supported Hardware & Firmware

HYTOPTODEVICE 330‑2403‑compatible SFP+ LRM comes with Dell‑specific EEPROM profile. It eliminates transceiver warning logs on matching Dell networking hardware.
 
Validated Dell Platforms:
  • Dell PowerConnect series enterprise switches
  • Dell EMC Networking S‑series data‑center switches with SFP+ slots
  • Dell N‑series enterprise switches
  • Other Dell devices accepting original 330‑2403 optics

2. Multi-Brand Cross Compatibility

Built on MSA SFP+ standard, this 10G SFP+ LRM also works on other major‑brand network hardware. Contact HYTOPTODEVICE sales team if you need EEPROM re‑coding for multi‑vendor mixed‑fabric environments.

3. Free Value-Added Services

HYTOPTODEVICE offers competitive bulk pricing for resellers, system integrators and data center contractors. We provide free special compatible EEPROM reprogramming for all bulk orders.
Available options include private label printing, custom packaging and deployment consulting. All modules pass optical calibration, temperature cycling and 72-hour full-traffic burn-in. Large-volume orders enjoy tiered discounts to reduce project CAPEX.

Primary Application Scenarios

  • Enterprise campus 10G upgrade re‑using existing multimode fiber
  • Data center rack‑to‑rack short‑range 10G interconnections
  • Dell switch stacking and aggregation uplink deployment
  • System‑integrator bulk project procurement
  • Legacy multimode‑cabling network renovation

Connectivity Solutions(Applications)

1. 10G to 10G for Switch-Switch Interconnection

10G‑to‑10G switch‑to‑switch trunk built with Dell‑compatible SFP+ 10G LRM transceiver over multimode fiber

2.10G for Switch-Media Converter

Fiber interconnection using SFP+ 10G LRM transceiver between switch and media converter within data‑center premises

3.10G for Switch to NIC

10G uplink from Huawei top‑of‑rack switch to server SFP+ NIC using multimode fiber plant

4.10G Structured Cabling Deployment

Enterprise multimode LC structured cabling deployment with mass‑installed SFP+ 10G LRM transceiver modules

The Core Feature 

1.10G High-Density & Ultra-Low Power Connectivity

Low‑power high‑density SFP+ 10G LRM transceiver delivers budget‑friendly 10‑gigabit upgrade paths for Dell‑centered networks. It lets operators reuse existing older multimode cabling for incremental network expansion.

Power‑saving high‑density SFP+ 10G LRM transceiver for multimode fiber reuse in  data‑center 10G upgrade


2.
Verified Host Interoperability

Each production batch gets real‑hardware testing on Dell devices. Pre‑loaded matching EEPROM enables smooth plug‑and‑play, no unsupported‑transceiver alerts under normal operation.
Real‑hardware interoperability lab validation for HPE ProCure‑compatible SFP+ 10G LRM module

3.Rigorous Testing, Uncompromising Reliability

All modules pass multi‑step optical‑performance checks, thermal cycling and burn‑in aging. Built‑in DDM lets operators view real‑time module status and simplify on‑site troubleshooting.

72‑hour full‑rate traffic burn‑in reliability screening for bulk batches of SFP+ 10G LRM transceiver

 

FAQ
Q1: What is the difference between standard 10G LRM and LRM2 transceivers?
A: Our HYTOPTODEVICE LRM2 is an upgraded iteration of the traditional 10G LRM transceiver. It optimizes laser transmission algorithms to greatly improve tolerance for modal dispersion, perfectly adapting to aged and low-quality legacy fiber cabling. Both modules adopt 1310nm wavelength and support dual SMF/MMF fiber types, yet our LRM2 solution delivers longer stable transmission distance and more consistent signal performance for complex on-site network environments.


Q2: Why choose our 10G LRM module over 10G-SR for campus network 10G upgrade projects?
A: Our Dell 330-2403 compatible 10G LRM transceiver is more suitable for campus network renovations. Compared with 10G-SR modules with short transmission distance, it supports up to 220m long-distance transmission over existing multimode fiber. It helps enterprises complete 10G network iteration without replacing original cabling, cutting construction costs and project downtime significantly.

Q3: What is a Mode Conditioning Patch (MCP) cord, and why is it recommended for our LRM modules?
A: An MCP mode conditioning patch cord is a professional matching accessory for our 10G LRM transceivers deployed on old OM1/OM2 multimode fiber. It effectively adjusts the laser injection mode of the module, suppresses DMD signal distortion and modal noise caused by aging fiber, and ensures our LRM modules maintain stable error-free 10G transmission at maximum distance.

Q4: What connector interface does HYTOPTODEVICE Dell 330-2403 10G LRM transceiver adopt?
A: Our Dell-compatible 10G SFP+ LRM module uses a standard duplex LC connector. The compact high-density interface matches mainstream enterprise structured cabling systems, perfectly fitting Dell switch SFP+ port layout, and supports flexible high-density wiring for campus and data center network deployments.

Q5: Is an optical attenuator required for ultra-short 2-meter links with our 10G LRM modules?
A: No attenuator is needed for conventional 2-meter short patch links. All our Dell 330-2403 compatible LRM modules are factory-calibrated with standard optical power, featuring precise power control to avoid receiver saturation in short-distance scenarios. An attenuator is only required for individual ultra-low-loss links with abnormal excessive receive power.

Q6: What is the maximum optical power overload threshold of our 10GBASE-LRM transceiver?
A: Our HYTOPTODEVICE 10G LRM modules strictly comply with 10GBASE-LRM industry standards, with a maximum optical power overload threshold of +0.5dBm. Built-in DDM real-time monitoring function allows users to track optical power data in real time, effectively avoiding signal saturation, bit errors and link instability caused by over-power input.

Q7: Can our 10G SFP+ LRM module work on traditional 1G SFP switch slots?
A: Our Dell 330-2403 compatible 10G LRM transceiver cannot run on 1G-only SFP slots. It adopts exclusive SFP+ 10G rate and electrical protocol, with no automatic rate downgrade function. It is professionally customized for 10G SFP+ ports to ensure stable high-speed forwarding of 10G network services.

Q8: Why do generic third-party LRM modules fail on Dell switches, while our modules work perfectly?
A: Dell networking devices have built-in transceiver identity verification mechanisms. Ordinary generic third-party modules lack dedicated Dell EEPROM coding, triggering port alarms and rejection. Our HYTOPTODEVICE modules are pre-flashed with professional Dell 330-2403 dedicated firmware, realizing true plug-and-play, zero alarm and zero error code operation on all compatible Dell equipment.

Q9: What is the maximum transmission distance of our LRM module on OM1 62.5/125µm multimode fiber?
A: Our Dell 330-2403 compatible 10G LRM transceiver achieves a stable maximum transmission distance of 220m on standard OM1 multimode fiber. To guarantee full-distance and error-free operation, we recommend matching with MCP patch cords to eliminate modal interference of legacy fiber and optimize overall link stability.

Q10: Can our 10G LRM transceiver be used for OS1/OS2 single-mode fiber transmission?
A: Our 10G LRM module is professionally designed for OM1-OM4 multimode fiber scenarios only. Although it uses 1310nm wavelength consistent with single-mode modules, its laser launch mode and optical parameters are optimized for multimode fiber. Deploying it on single-mode fiber will cause severe signal distortion and fail to establish valid network links.

Q11: Does HYTOPTODEVICE 10G LRM module support hot-swap deployment?
A: Yes. All our Dell 330-2403 compatible SFP+ LRM modules fully comply with SFF-8431 industrial hot-swap specifications. They support live plugging and unplugging without shutting down Dell switches, helping enterprises complete module replacement and network maintenance with zero service downtime.

Q12: What causes intermittent link flapping of our LRM module, and how to fix it?
A: Occasional link flapping is mostly related to on-site wiring environment rather than module quality. Common causes include dirty LC port end faces, lack of MCP cords for old fiber, excessive splicing loss, or abnormal optical power. Our modules support real-time DDM data detection, helping engineers quickly locate faults and restore stable links.

Packaging & Custom OEM Solutions

Our 10G SFP+ LRM module comes sealed in standard anti-static (ESD-safe) packaging, pre-stocked and ready for immediate shipment. For bulk orders, we offer custom OEM packaging—including logo printing and private labeling—tailored for network distributors, system integrators, and enterprise deployments.
HYTOPTODEVICE sfp-10g-sr optical transceiver module custom package


Why Network Engineers Choose HYTOPTODEVICE

HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
  • Up to 70% cost savings vs OEM, transparent pricing & flexible bulk rates, supported quality returns
  • 100% real-device compatible with Cisco, Huawei,Dell,Juniper, and Arista
  • ISO 9001:2015 Shenzhen factory, full lineup: 1.25G/10G/25G/40G/100G/200G/400G/800G/1.6T transceivers
  • Ample stock, fast global DHL/FedEx shipping in 3–5 working days
  • Free pre-sales engineering support for custom EEPROM  & private label firmware
  • Real switch test videos available for pre-purchase review; inspection & shipping videos provided per order

“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia


Quality Certification & Compliance

 At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.

We adhere to rigorous standards for our SFP modules and network solutions:

  • ISO 9001: Certified quality management and production consistency.

  • CE & FCC: Fully compliant for seamless Global Market Access.

  • RoHS: Committed to environmental responsibility and hazardous material control.

  • Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.

Certified Quality. Global Standards. Guaranteed Performance.




Rigorous Industrial Product Testing

   hytoptodevice check device and equiptment for optical transceiver module

100% 3rd Party Compatible
hytoptodevice 100g qsfp28 sr4 replacement
Partial Test Demonstration
hytoptodevice compatible optical transceiver module for ethernet,data center

Others
HYTOPTODEVICE 100G QSFP28 TRANSCEIVER sr4 application for data center,ethernet

 



 

 

 

  • HYTOPTODEVICE Dell compatible 10G SFP+ LRM optic delivers 10GBASE‑LRM 1310nm
  • Low‑energy SFP+ 10G LRM transceiver for large‑scale dell switch deployment over multimode cables
  • Pre‑coded zero‑warning SFP+ 10G LRM transceiver built for dell switching platforms with multimode infrastructure"
  • hytoptodevice sfp+ 10g lrm module 1310nm 220m smf for switch

Download