MikroTik S-31DLC40D Compatible 1000BASE-EX Fiber Optic Transceiver | SFP 1310nm 40km SMF Bulk Wholesale | HYTOPTODEVICE
Product Overview
This 1000BASE-EX fiber optic transceiver delivers full pin-to-pin and firmware compatibility with MikroTik S-31DLC40D. Custom EEPROM programming eliminates device recognition errors and system alarms for seamless plug-and-play operation on MikroTik routing and switching platforms.
Featuring 1310nm wavelength and 40km single-mode fiber reach, this fiber optic transceiver ensures stable long-distance gigabit transmission, ideal for wide-area network deployment, bulk procurement and inventory stocking.
Every fiber optic transceiver undergoes strict MikroTik compatibility verification and high-temperature aging tests, delivering consistent batch quality for commercial wholesale and large-scale network implementation.
Key Technical Specifications
| MikroTik Compatible |
S-31DLC40D |
Vendor Name |
HYTOPTODEVICE |
| Form Factor |
SFP |
Max Data Rate |
1.25Gbps |
| Wavelength |
1310nm |
Max Distance |
40km |
| Connector |
Duplex LC |
Transmitter Type |
1310nm DFB |
| Cable Type |
SMF |
Receiver Type |
PIN |
| TX Power |
-5.0~0dBm |
Receiver Sensitivity |
< -23.0dBm |
| Typical Power Consumption |
≤1W |
Receiver Overload |
-1dBm |
| Bit Error Ratio (BER) |
1E-12 |
DDM/DOM |
Support |
| Protocols |
SFF-8472 MSA Compliant, IEEE 802.3ah-2004 |
Operation Temperature |
0 to 70°C (32 to 158°F) |
Usage Guidelines & Best Practices
- Fiber Choice: Use Single-Mode Fiber (SMF) only. Do NOT use MMF
- Laser Safety: Never look directly into optical ports or fiber ends.
- ESD Safety:: Wear an anti-static wrist strap before handling.
-
Connector Match: UPC/PC polish only. Do NOT use APC
-
Cleanliness & Dust: Keep dust caps on all unused ports and connectors at all times. Clean fiber end-faces with a optical cleaning pen before insertion; dust causes over 80% of optical link failures.
-
Optical Attenuator Required for Short Links: For testing or short-distance connections (<10 km), connect a 5dB–10dB optical attenuator to the RX port to prevent damaging the receiver.
-
Installation & Hot-Swap Rules:MSA hot-swappable. Insert/remove gently without powering down.
-
High Loss/Packet Drops: Check fiber bend radius (>30 mm); inspect optical power levels; clean optical connectors
-
No Link: Swap TX/RX fiber connections; clean fiber end-faces; verify port settings.
Links to the Datasheet, User Guide and Compatibility Guides are available on the product page.
Full Compatibility List and Supported Devices
1. Supported Hardware & Firmware
This MikroTik-compatible fiber optic transceiver supports zero-alarm plug-and-play operation with mainstream MikroTik routers and switches, fully compatible with new and legacy RouterOS firmware versions. Supported device series are listed below:
-
MikroTik CCR Series Cloud Core Routers
-
MikroTik RB2011/RB3011/RB4011 Enterprise Router Platforms
-
MikroTik Enterprise Gigabit Switching & Routing Devices
2. Multi-Brand Cross Compatibility
Compliant with SFP MSA standards, this fiber optic transceiver module supports multi-brand interconnection, meeting mixed-vendor equipment procurement and wholesale distribution needs.
3. Free Value-Added Services
HYTOPTODEVICE delivers complete fiber optic transceiver procurement packages: free sample validation, custom EEPROM programming, OEM options, low‑MOQ bulk wholesale and stable long‑term project supply contracts.
Main Application Scenarios
-
Wide-Area Network Construction: Bulk deployment of 40km long-reach fiber optic transceiver for cross-town, cross-branch and remote base station fiber interconnection
-
Network Distributor Inventory Stocking: Cost-effective MikroTik S-31DLC40D replacement fiber optic transceiver for daily wholesale and retail distribution business
-
Enterprise Network Upgrade & Expansion: Batch procurement of gigabit SFP optics for MikroTik routing and switching equipment renewal and long-distance network expansion
-
Global Network Product Wholesale: Customizable low-MOQ fiber optic transceiver for cross-border network equipment traders and system integration suppliers
Connectivity Solutions(Applications)
1.1GbE Switch-to-Switch Connectivity

2.1GbE Switch to Media Converter Connectivity
The Core Feature
1.40km 1G Low-Power Interconnect
High-efficiency, low-power design that prevents overheating and signal drop, optimized for enterprise data center scaling.
2.Host-Tested for Proven Interoperability
All fiber optic transceivers pass real
Palo Alto Networks device testing. Pre-flashed EEPROM ensures zero-alarm recognition, fixing third-party module incompatibility and link flapping for safe bulk purchase.Specific Compatibility Video available upon request.
3.100% Tested for Zero-Defect Reliability
Step inside our
Test Center to see how we guarantee maximum network uptime and zero-defect reliability for every fiber optic transceiver before it leaves the factory.

FAQ
Q1: Are green APC LC fiber cables compatible with MikroTik S-31DLC40D fiber optic transceiver for long-distance networking?
A: No. Standard MikroTik SFP ports only support UPC/PC blue connectors. APC connectors trigger excessive insertion loss and alignment errors, resulting in unstable optical links.
Q2: Can MikroTik compatible 1000BASE-EX fiber optic transceiver be hot-swapped during device operation?
A: Yes. This compatible optical module features a full hot-swappable design, enabling safe plugging and unplugging while MikroTik routing and switching equipment remains running.
Q3: What is the long-term operational reliability (MTBF) of 40km 1310nm MikroTik fiber optic transceiver?
A: Qualified long-reach fiber optic transceiver boasts an industry-leading MTBF of over 1,000,000 hours, supporting stable long-term commercial network operation.
Q4: Do third-party MikroTik S-31DLC40D fiber optic transceiver deliver the same performance as original modules? A: Standard compliant third-party fiber optic transceiver delivers identical 40km transmission performance and RouterOS compatibility as original units, with more competitive bulk wholesale pricing.
Q5: Is commercial-grade MikroTik fiber optic transceiver suitable for outdoor uncooled cabinet deployment scenarios?
A: No. Commercial optical modules only adapt to 0℃-70℃ indoor environments. Outdoor unregulated deployment requires industrial-grade wide-temperature fiber optic transceiver.
Q6: What laser safety certification do 1310nm 40km MikroTik EX fiber optic transceiver meet?
A: The built-in 1310nm laser chip is certified as a Class 1 Laser Product, ensuring complete safety for daily network operation and maintenance work.
Q7: What is the typical power consumption of gigabit long-range MikroTik fiber optic transceiver?
A: This low-power fiber optic transceiver consumes less than 1.0W, effectively reducing overall energy consumption of enterprise network systems.
Q8: Can 1000BASE-EX MikroTik fiber optic transceiver adapt to 1G Fibre Channel network transmission?
A: Yes. The gigabit fiber optic transceiver supports both IEEE 802.3z Gigabit Ethernet and 1GFC Fibre Channel protocols for multi-scenario network interconnection.
Q9: Do standard MikroTik EX fiber optic transceiver support professional SONET and SDH transmission services?
A: Regular Ethernet fiber optic transceiver does not support SONET/SDH transmission, which requires specially customized multi-rate optical modules.
Q10: How to resolve common link down failures on deployed MikroTik 40km fiber optic transceiver?
A: Reverse fiber polarity, clean dirty fiber end faces, manually lock port speed to 1Gbps, and verify device compatibility to resolve link-down failures efficiently.
Q11: Which professional testing tools apply to MikroTik long-distance fiber optic transceiver signal detection?
A: An Optical Power Meter (OPM) or Visual Fault Locator (VFL) can safely and accurately detect the working status of 40km fiber optic transceiver.
Q12: What key factors cause CRC errors and packet loss on MikroTik long-reach transceiver links?
A: Dirty LC connectors, damaged single-mode patch cords, or optical attenuation close to -19dBm are the main causes of unstable data transmission.
Q13: Will using compatible third-party fiber optic transceiver void MikroTik network device warranties?
A: No. Relevant consumer protection regulations prohibit manufacturers from voiding device warranties due to the use of qualified compatible third-party fiber optic transceiver.
Q14: What quality testing processes do MikroTik compatible fiber optic transceiver complete before factory shipment?
A: Each batch of fiber optic transceiver undergoes 100% full testing including eye diagram analysis, optical power calibration, receiver sensitivity testing and MikroTik equipment interoperability verification.
Q15: Are MikroTik 1G 40km fiber optic transceiver compatible with mainstream fiber media converter devices? A: Yes. The gigabit fiber optic transceiver works with all mainstream fiber media converters equipped with standard 1G-rate SFP slots.
Packaging Options & Custom‑Packaging Solutions
Every transceiver module gets reliable ESD‑safe packaging out of the box. Standard packing is ready for immediate shipment, while custom‑printed packaging with your logo is available for bulk orders.
Why Network Engineers Choose HYTOPTODEVICE
HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
- 100% MSA-compliant modules with Cisco, Huawei,Dell,Juniper, and Arista compatibility
- ISO 9001:2015 certified manufacturing facility in Shenzhen
- Average lead time of 3–5 business days with DHL/FedEx express options
- Dedicated pre-sales engineering support for custom configurations
- Actual hardware,actual switches,actual results.we publish compatibility test video,eliminate compatibility anxiety. you can watch before you buy.
- We can provide inspection and shipping videos to make you feel as if you are right here with the product.
"We replaced 200 Cisco-branded SFPs with HYTOPTODEVICE equivalents across our spine layer — zero compatibility issues, 40% cost reduction."— Network Architect, Tier-2 ISP, Germany
Quality Certification & Compliance
At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final inspection, our processes ensure global compliance and reliability.
We adhere to rigorous standards for our SFP modules and network solutions:
-
ISO 9001: Certified quality management and production consistency.
-
CE & FCC: Fully compliant for seamless Global Market Access.
-
RoHS: Committed to environmental responsibility and hazardous material control.
-
Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.
Certified Quality. Global Standards. Guaranteed Performance.

Rigorous Industrial Product Testing

100% 3rd Party Compatible

Partial Test Demonstration
