| NO. | Brand | Compatible P/N | Transceiver Type |
| 1 | Cisco | QSFP-100G-SR4-S | QSFP28-100G-PSM4 |
| 2 | Arista Networks | QSFP-100G-SR4-S | QSFP28-100G-IR4 |
| 3 | Huawei | QSFP-100G-SR4 | QSFP28-100G-LR4 |
| 4 | Juniper | JNP-QSFP-100G-SR4 | QSFP28-100G-ER4L |
| 5 | H3C | QSFP-100G-SR4-MM850 | QSFP28-100G-ZR4 |
| 6 | HPE Aruba | JL309A | QSFP28-100G-DR |
| 7 | HPE BladeSystem | 845966-B21 | QSFP28-100G-FR |
| 8 | Mellanox | MMA1B00-C100D | QSFP28-100G-LR |
Cisco Compatible QSFP-100G-SR4-S | Commercial Grade Cisco 100G QSFP28 SR4 Transceiver | HYTOPTODEVICE(100m, MMF, 850nm, MPO-12, DOM)
Product Overview
This Cisco 100G QSFP28 SR4 transceiver matches Cisco QSFP-100G-SR4-S official specs, operating at 850nm wavelength withMPO-12 connector., supporting 100m transmission over OM3/OM4 multi-mode fiber (MMF). This commercial-grade Cisco 100G QSFP28 SR4 transceiver runs stably from 0℃ to 70℃ with complete DDM monitoring.
All HYTOPTODEVICE Cisco 100G QSFP28 SR4 transceiver passes full optical aging inspection, full optical performance test data and real-machine test videos are available on request. It is fully compliant with IEEE, QSFP MSA and RoHS standards, 100% plug-and-play without extra switch configuration. Our cost-effective Cisco 100G QSFP28 SR4 transceiver cuts over 70% procurement cost vs original OEM optics, ideal for data center leaf-spine, AI server rack interconnection and colocation aggregation projects with bulk wholesale & OEM EEPROM customization supported.
Key Technical Specifications
| Cisco Compatible | QSFP-100G-SR4-S | Vendor Name | HYTOPTODEVICE |
| Form Factor | QSFP28 | Max Data Rate | 103.125Gbps (4x 25.78Gbps) |
| Wavelength | 850nm | Max Distance | 100m on OM4 |
| Connector | MTP/MPO-12(UPC) | Transmitter Type | 850nm VCSEL |
| Cable Type | MMF | Receiver Type | PIN |
| TX Power | -8.4~+2.4dBm | Receiver Sensitivity | < -9.5dBm |
| Protocols | 100G Ethernet, MSA Compliant | Power Consumption | < 2.0W |
Usage Guidelines & Best Practices
Fiber Choice: Only works with OM3 / OM4 multi‑mode MPO‑12 trunk cable; single‑mode fiber cannot support 850nm SR4 transmission and will lead to link failure.
Distance Limit: Max 70m on OM3 MMF, max 100m on OM4 MMF; excessive splices, dirty end‑faces or sharp bends reduce actual working distance.
Cleanliness & Dust: Keep dust caps on whenever unattached. Clean fiber end-faces with a optical cleaning pen before insertion; dust causes over 80% of optical link failures.
Installation Specification: Hot‑plug supported; keep MPO connector end‑faces clean, observe minimum fiber‑bend radius requirements.
Operating Environment: Commercial temperature range 0°C‑70°C; maintain cabinet airflow to avoid module overheating.
For detailed operation instructions, please refer to the User Guide.
Full Compatibility List & Multi-Brand Supported Network Hardware
Nexus 9000 Series: 9300, 9500 (e.g., N9K-C93180YC-FX, N9K-C9336C-FX2).
Nexus 3000 Series: 3100, 3200 (e.g., N3K-C31108PC-V).
Catalyst Series: Catalyst 9500, 9600, 9800-CL.
ASR 9000 Series Routers: With compatible 100G line cards.
Cisco UCS: 6454/64108 Fabric Interconnects.
Primary Application Scenarios







| Feature | 10G SR | 100G SR4 |
| Form Factor | SFP+ | QSFP28 |
| Data Rate | 10.3 Gbps | 103.1 Gbps(4x25.78 Gbps) |
| Wavelength | 850nm | 850nm |
| Number of Lanes | 1 Lane (Serial) | 4 Lanes (Parallel) |
| Connector | Duplex LC | MPO-12 (MTP) |
| Fiber Strands | 2 Fibers (1 TX / 1 RX) | 8Fibers (4 TX / 4 RX) |
| Distance (OM4) | Up to 400m | Up to 100m |
| Power Consumption | ~1W | ~2.5W - 3.5W |
| Breakout Support | No | Yes (1x 100G to 4x 25G) |
| Feature | QSFP-100G-SR4-S (S-Class) | QSFP-100G-SR4 (Non-S Class) |
| Protocol Support | Ethernet Only | Ethernet, OTN, InfiniBand |
| Reach (OM4) | 100 meters | 100 meters |
| Wavelength | 850nm | 850nm |
| Temperature Range | Commercial (0°C to 70°C) | Commercial (0°C to 70°C) |
| Target Market | Enterprise / Standard Data Centers | Service Providers / High-End Data Centers |
Packaging & Custom OEM Solutions
ESD Protection & Fast Shipping: Every module is sealed in an ESD-safe bag and ready for same-day dispatch from stock.
Custom OEM & Branding: We provide logo printing, private labeling, and custom packaging to help distributors and integrators build their brand—no factory investment required.

Why Network Engineers Choose HYTOPTODEVICE
HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia
Quality Certification & Compliance
At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.
We adhere to rigorous standards for our SFP modules and network solutions:
ISO 9001: Certified quality management and production consistency.
CE & FCC: Fully compliant for seamless Global Market Access.
RoHS: Committed to environmental responsibility and hazardous material control.
Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.
Certified Quality. Global Standards. Guaranteed Performance.




