H3C SFP-XG-LRM-MM1310 Compatible SFP+ 10G LRM Transceiver | 10GBASE‑LRM 1310nm 220m MMF Bulk Wholesale
Product Overview
HYTOPTODEVICE SFP+ 10G LRM transceiver works as drop‑in compatible replacement for H3C SFP‑XG‑LRM‑MM1310, delivering stable 10‑gigabit performance over legacy multimode fiber for H3C enterprise and data‑center switches. It supports OM1‑OM4 multimode fiber with maximum reach of 220 m at 1310 nm wavelength, perfect for campus and data‑center 10G upgrades without replacing existing multimode cabling.
This MSA‑compliant 10GBASE‑LRM SFP+ optical unit adopts FP laser architecture with duplex LC connectors. It meets IEEE 802.3aq, SFF‑8431 and SFF‑8472 industry standards, equipped with DDM real‑time diagnostic capability for fast fiber‑layer fault localization.
Every HYTOPTODEVICE SFP+ 10G LRM transceiver ships pre‑flashed with H3C‑optimized EEPROM profiles, eliminating unsupported‑transceiver alerts and unexpected port shutdown risks. Low‑power design reduces thermal load inside densely populated racks. Ideal for data‑center refresh, campus backbone links and high‑volume purchasing for system integrators and overseas resellers.
Key Technical Specifications
| H3C Compatible |
SFP-XG-LRM-MM1310 |
Vendor Name |
HYTOPTODEVICE |
| Form Factor |
SFP+ |
Max Data Rate |
10.3125Gbps |
| Wavelength |
1310nm |
Max Distance |
220m@OM3/300m@SMF |
| Connector |
Duplex LC |
Transmitter Type |
1310nm FP |
| Cable Type |
50/125µm@OM3 MMF, 9/125μm@SMF |
Receiver Type |
PIN |
| TX Power |
-6.5~-0.5dBm |
Receiver Sensitivity |
< -10.0dBm |
| Power Consumption |
≤1W |
Receiver Overload |
1.5dBm |
| Protocols |
IEEE 802.3ae, SFF-8472, SFF-8431, SFF-8432, SFP+ MSA Compliant, CPRI, eCPRI |
Operation Temperature |
0 to 70°C (32 to 158°F) |
For detailed technical specifications, please refer to the Datasheet
Usage Guidelines & Best Practices
-
Fiber Compatibility: Supports OM1–OM4 multimode and OS2 single-mode fiber (max 220 m). A Mode Conditioning Patch Cord (MCP) is mandatory on the TX port for legacy OM1/OM2 fiber to prevent signal degradation.
-
Maintenance & Polarity: Clean LC connectors before insertion to avoid signal loss. Ensure correct polarity—always map the MCP single-mode leg to the TX port.
-
Distance & Link Budget: Maximum distance is strictly 220 m across all fiber types. Excessive splices, patch panels, or sharp bends will reduce range.
-
Thermal Management: Power consumption is ≤1W , operating standardly at 0°C to 70°C without auxiliary cooling.
-
Industrial Grade Option: For outdoor or harsh environments with extreme temperatures, select industrial-grade (-40°C to 85°C) modules.
For detailed operation instructions, please refer to the User Guide.
Full Compatibility List & Supported Network Hardware
1. Supported Hardware & Firmware
HYTOPTODEVICE SFP+ 10G LRM transceiver matches mechanical dimensions and optical performance of original H3C SFP‑XG‑LRM‑MM1310. Custom‑calibrated EEPROM suppresses third‑party transceiver warning logs. Each production batch undergoes real‑machine traffic testing on genuine H3C hardware to avoid signal distortion and unstable link performance.
Validated H3C Platforms:
• H3C S5500 / S6500 series enterprise switches
• H3C S10500 data‑center switch series
• H3C campus aggregation switches
• H3C compatible SFP+ server NIC ports
2. Multi-Brand Cross Compatibility
Built upon universal SFP+ MSA specification, HYTOPTODEVICE SFP+ 10G LRM transceiver maintains stable operation across Cisco, Arista, Juniper, Dell, HPE and other mainstream network hardware. Well‑suited for multi‑vendor mixed‑fabric environments, intra‑data‑center short‑reach interconnections and mixed‑fiber cabling renovation projects.
3. Free Value-Added Services
HYTOPTODEVICE offers competitive bulk pricing for resellers, system integrators and data center contractors. We provide free special compatible EEPROM reprogramming for all bulk orders.
Available options include private label printing, custom packaging and deployment consulting. All modules pass optical calibration, temperature cycling and 72-hour full-traffic burn-in. Large-volume orders enjoy tiered discounts to reduce project CAPEX.
Primary Application Scenarios
• Intra‑data‑center links re‑using existing legacy multimode cabling
• Cost‑effective 10G infrastructure upgrade without cable replacement
• Short‑reach 10G uplink connections for aggregation and top‑of‑rack switches inside enterprise premises
• Bulk supply for global optical‑component distributors and system integration partners
• Multi‑vendor hybrid data‑center rack‑to‑rack fiber interconnections
Connectivity Solutions(Applications)
1. 10G to 10G for Switch-Switch Interconnection.

2.10G for Switch-Media Converter

3.10G for Switch to NIC

4.10G Structured Cabling Deployment

The Core Feature
1.10G High-Density & Ultra-Low Power Connectivity
Low‑power high‑density SFP+ 10G LRM transceiver delivers budget‑friendly 10‑gigabit upgrade paths for H3C‑centered networks. It lets operators reuse existing older multimode cabling for incremental network expansion.

2.Verified Host Interoperability
Each production batch of HYTOPTODEVICE SFP+ 10G LRM transceiver runs physical interoperability tests against H3C Comware and other mainstream network operating‑system firmware. Pre‑calibrated EEPROM register data eliminates unauthorized‑transceiver warning logs, delivering consistent plug‑and‑play reliability for bulk‑order clients.

3.Rigorous Testing, Uncompromising Reliability
All SFP+ 10G LRM transceiver units pass fiber‑link simulation, high‑low temperature cycling and 72‑hour full‑rate traffic burn‑in tests. Precision optical‑power calibration optimizes signal performance for legacy multimode media. Built‑in DDM monitoring enables remote early‑fault identification for non‑stop 24/7 intra‑data‑center backbone operation.

FAQ
Q1: What network‑scenario benefit does HYTOPTODEVICE 10GBASE‑LRM SFP+ bring to sites running old multimode fiber cabling?
A: HYTOPTODEVICE 10GBASE‑LRM SFP+ optics allow network operators to roll out 10Gbps links while re‑using existing OM1‑OM4 multimode plant. It delivers cost‑saving 10G upgrades for campus and data‑center environments without full‑scale cable replacement.
Q2: What is the operating light wavelength for HYTOPTODEVICE H3C‑compatible 10G LRM SFP+ transceivers?
A: Our HYTOPTODEVICE replacement 10G LRM SFP+ runs at 1310 nm, the standardized wavelength defined within the 10GBASE‑LRM specification for multimode‑focused 10G transmission.
Q3: How do real‑world deployment scenarios differ between 10GBASE‑LRM and 10GBASE‑SR SFP+ optical modules?
A: Our HYTOPTODEVICE 10G LRM targets longer multimode links up to 220 m with 1310 nm laser. By comparison, 10G‑SR uses 850 nm and is limited to short rack‑to‑rack distances. LRM suits campus aggregation links, while SR serves intra‑rack short‑reach connections.
Q4: What key distinction exists between 10GBASE‑LRM and 10GBASE‑LR even though both adopt 1310 nm wavelength?
A: HYTOPTODEVICE 10G‑LRM is designed exclusively for multimode fiber infrastructures. 10G‑LR is built for single‑mode fiber only. Matching wavelength does not mean they can operate across different fiber media types.
Q5: Why would network planners pick LRM‑type optics over SR alternatives for campus‑wide 10G modernization projects?
A: When campus sites have long‑run legacy multimode cabling, HYTOPTODEVICE 10G LRM delivers superior reach compared to SR modules. It protects existing cabling investment, avoids expensive cable re‑pulling and delivers stable 10G performance across campus aggregation points.
Q6: What operational role does a mode‑conditioning patch cord play within 10G LRM multimode‑fiber link deployments?
A: Mode‑conditioning patch cords tune how laser light enters older multimode fiber. When paired with HYTOPTODEVICE 10G LRM transceivers, they reduce modal distortions, especially critical for OM1 and OM2 cable runs approaching the maximum 220‑meter distance limit.
Q7: How do compliant 10GBASE‑LRM transceivers handle DMD‑related signal degradation on aged multimode fiber?
A: HYTOPTODEVICE 10G LRM transceivers implement controlled restricted‑mode laser launching. This design suppresses differential‑mode‑delay (DMD) distortion, preserving signal integrity when transmitting 10G traffic over older multimode fiber cables.
Q8: What level of optical receiving performance can I expect from HYTOPTODEVICE H3C‑compatible 10G LRM SFP+ optics under standard conditions?
A: Our HYTOPTODEVICE H3C‑compatible 10GBASE‑LRM SFP+ meets industry specification with typical‑12.5 dBm receiver sensitivity, supporting reliable signal reception across all valid multimode link distances within spec.
Q9: How should network engineers calculate realistic link‑budget values for on‑site 10G LRM multimode fiber links?
A: For HYTOPTODEVICE 10G‑LRM link‑budget calculation, deduct losses from fiber attenuation, connectors and splices from the module’s total power budget. Ensure cumulative loss stays within the module’s power margin and never exceed the 220 m maximum distance limit.
Q10: Can I set up a functional 10G link by pairing a 10GBASE‑LRM transceiver with a remote‑end 10GBASE‑SR SFP+ module?
A: A stable working link cannot be established in this mixed‑module setup. HYTOPTODEVICE 10G‑LRM and 10G‑SR use dissimilar laser wavelengths and launch profiles. Both ends of the fiber link must use matching 10G‑LRM transceivers for valid 10G Ethernet operation.
Q11: Can HYTOPTODEVICE 10GBASE‑LRM SFP+ modules be inserted and operated inside 25G‑capable SFP28 switch ports?
A: Physically the SFP+ form factor fits SFP28 slots. Most modern network hardware supports rate‑fallback down to 10Gbps. Certain H3C Comware‑based switches need manual port‑speed configuration; validate switch‑firmware behavior before live production roll‑out.
Packaging & Custom OEM Solutions
Our 10G SFP+ LRM module comes sealed in standard anti-static (ESD-safe) packaging, pre-stocked and ready for immediate shipment. For bulk orders, we offer custom OEM packaging—including logo printing and private labeling—tailored for network distributors, system integrators, and enterprise deployments.

Why Network Engineers Choose HYTOPTODEVICE
HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
- Up to 70% cost savings vs OEM, transparent pricing & flexible bulk rates, supported quality returns
- 100% real-device compatible with Cisco, Huawei,Dell,Juniper, and Arista
- ISO 9001:2015 Shenzhen factory, full lineup: 1.25G/10G/25G/40G/100G/200G/400G/800G/1.6T transceivers
- Ample stock, fast global DHL/FedEx shipping in 3–5 working days
- Free pre-sales engineering support for custom EEPROM & private label firmware
- Real switch test videos available for pre-purchase review; inspection & shipping videos provided per order
“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia
Quality Certification & Compliance
At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.
We adhere to rigorous standards for our SFP modules and network solutions:
-
ISO 9001: Certified quality management and production consistency.
-
CE & FCC: Fully compliant for seamless Global Market Access.
-
RoHS: Committed to environmental responsibility and hazardous material control.
-
Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.
Certified Quality. Global Standards. Guaranteed Performance.

Rigorous Industrial Product Testing

100% 3rd Party Compatible

Partial Test Demonstration

Others


