• 15km 100BASE-BX-D SFP BiDi Module, H3C SFP-FE-LX-SM1550-BIDI compatible Tx1550 Rx1310 simplex LC single mode fiber transceiver
  • Bulk supply H3C compatible single fiber SFP BiDi module with DDM, 15km long-range optical transceiver for enterprise network
  •  100base-bx-D TX1550nm RX310nm fiber port detail bidirectional sfp transceivers 15km
  •  hytoptodevice 100M 15km BiDi SFP transceiver compatible, simplex‑LC for cost‑saving long‑range fiber link upgrade
  • 15km 100BASE-BX-D SFP BiDi Module, H3C SFP-FE-LX-SM1550-BIDI compatible Tx1550 Rx1310 simplex LC single mode fiber transceiver
  • Bulk supply H3C compatible single fiber SFP BiDi module with DDM, 15km long-range optical transceiver for enterprise network
  •  100base-bx-D TX1550nm RX310nm fiber port detail bidirectional sfp transceivers 15km
  •  hytoptodevice 100M 15km BiDi SFP transceiver compatible, simplex‑LC for cost‑saving long‑range fiber link upgrade

 H3C SFP-FE-LX-SM1550-BIDI Compatible 100BASE-BX-D BiDi SFP Module | Tx1550Rx1310 15km Simplex LC Bulk Wholesale | HYTOPTODEVICE

High-quality H3C SFP-FE-LX-SM1550-BIDI compatible bidi sfp module, 100BASE-BX-D single-strand transceiver with Tx1550/Rx1310 wavelength and 15km single-mode fiber transmission. Simplex LC bidi sfp module supports DDM monitoring, native H3C plug-and-play compatibility, ideal for enterprise networking and bulk wholesale.support bulk wholesale, private label, custom EEPROM Programming and OEM for global importers, distributors and system integrators.
NO. Brand  Compatible P/N Transceiver Type
1 Cisco  GLC-FE-100BX-D  SFP-M35-10LD
2 Alcatel-Lucent  iSFP-100-BX-D  SFP-M31-10LD
3 Allied Telesis  AT-SPFXBD-LC-15 SFP-M31-40LD
4 Avaya  AA1419083-E5  SFP-M55-80LD
5 Brocade  E1MG-100BXD-20 
6 Extreme  10058-20 
7 H3C  SFP-FE-LX-SM1550-BIDI 
8 HPE(H3C)  JD101A 
9 HPE(Procurve)  J9099B
10 Huawei  SFP-FE-LX-SM1550-BIDI 
11 Juniper  SFP-FE20KT15R13
12 Netgear  SFP-FE-BX
Description

 H3C SFP-FE-LX-SM1550-BIDI Compatible 100BASE-BX-U BiDi SFP Module | Tx1550Rx1310 15km Simplex LC Bulk Wholesale | HYTOPTODEVICE

Product Overview

HYTOPTODEVICE H3C SFP-FE-LX-SM1550-BIDI compatible bidi sfp module is a 100Mbps single-fiber bidirectional transceiver. Complying with IEEE 802.3ah and MSA standards, it features Tx1550nm/Rx1310nm wavelength, delivering stable low-jitter transmission up to 15km over G.652/G.657 single-mode fiber.
Pre-flashed with professional H3C exclusive firmware, our bidi sfp module supports plug-and-play, zero-alarm operation for mainstream H3C network devices. The single-strand WDM design saves 50% fiber resources, while built-in DDM enables real-time network monitoring. All modules pass strict calibration and aging tests, delivering reliable batch performance for enterprise network upgrades and bulk projects.

Key Technical Specifications
 

H3C Compatible

  SFP-FE-LX-SM1550-BIDI

Vendor Name HYTOPTODEVICE
Form Factor SFP Max Data Rate 155Mbps
Wavelength TX1550nm/RX1310nm Max Distance 15km 
Connector Simplex LC Transmitter Type 1550nm FP
Cable Type SMF Receiver Type PIN
TX Power -14.0~-8dBm Receiver Sensitivity < -32.0dBm
Protocols Fast Ethernet, Gigabit Fibre Channel, MSA Compliant Operation Temperature 0 to 70°C (32 to 158°F)

For detailed technical specifications, please refer to the Datasheet

Usage Guidelines & Best Practices

  1. Complementary Pairing Requirement Bidirectional transceivers must be deployed in matched wavelength pairs. This TX1310/RX1550 BiDi SFP Module requires a counterparty TX1550/RX1310 transceiver at the opposite fiber end; mismatched wavelength pairs cannot establish valid fiber links.
  2. Fiber Type Restriction Only use standard 9/125μm single mode fiber (SMF) with LC/UPC patch cords. This transceiver cannot operate normally on multi-mode fiber (MMF), which triggers severe attenuation and persistent random bit errors.
  3. Power Range & Short-Distance Testing This module operates with a transmit power (TX) of -14 to -8 dBm and a receiver overload threshold of -8 dBm. Since the maximum TX power does not exceed the overload limit, external optical attenuators are generally not required for short-distance connections or bench testing. However, always ensure that the received optical power (RX Power) remains strictly at or below -8 dBm to prevent receiver saturation.
  4. Optical Port Dust Protection LC optical ports and fiber end faces are highly sensitive to dust and fingerprint contamination. Always reinstall protective dust caps on idle module ports and unused fiber connectors after disconnection.
  5. Hot-Plugging Operation Guidance This MSA-compliant BiDi SFP Transceiver supports safe hot swap. Leave several seconds between removal and reinsertion to let Cisco IOS complete full hardware recognition and avoid unexpected link flapping.

For detailed operation instructions, please refer to the User Guide.


Full Compatibility List & Supported Devices

1. Supported Hardware & Firmware

This SFP-FE-LX-SM1550-BIDI replacement bidi sfp module features dedicated H3C EEPROM firmware, enabling native device recognition without manual configuration. It runs stably on all mainstream H3C enterprise switches, routers and access devices with zero alarms and link errors.
  • Compatible Device Series: H3C S5120, S5560, S6520, S9500 and full H3C SMB & enterprise switching platforms
  • Port Adaptability: 100/1000 adaptive SFP ports with automatic speed negotiation
  • Firmware Adaptation: Fully compatible with all official H3C OS firmware versions

2. Multi-Brand Cross Compatibility

As a standard MSA-compliant bidi sfp module, it delivers universal cross-brand compatibility, supporting mixed-vendor network deployment and module replacement for diverse enterprise network environments.
  • Compatible Brands: Cisco, Huawei, Juniper, HPE, Arista, H3C, ZTE
  • Applicable Devices: Enterprise switches, routers, optical media converters
  • Performance: Plug-and-play, stable link, no system error alarms

3. Free Value-Added Services

We provide exclusive free value-added services for bulk and project orders to simplify procurement and deployment:
  • Free compatibility test video provision for pre-project verification
  • Free DDM parameter test reports and factory aging test certificates
  • Free technical guidance for BiDi paired link deployment and fault debugging
  • Free customized packaging and label processing for wholesale orders
  • Long-term free after-sales technical consultation and remote guidance

Primary Application Scenarios
  • H3C Enterprise 15km Medium-Range Networking: Stable medium-distance interconnection for enterprise campuses, office buildings and industrial park network links
  • ISP Last-Mile Broadband Construction: Cost-effective single-fiber BiDi solution for operator community and suburban broadband access engineering and large-scale bulk procurement
  • Medium-Distance Security Monitoring Transmission: Reliable 100Mbps stable data transmission for outdoor monitoring equipment and intelligent network systems within 15km coverage
  • Legacy H3C Network Expansion & Renovation: Resource-saving single-fiber solution for old network expansion, fiber resource shortage and large-scale equipment batch replacement projects

Connectivity Solutions(Application)

1.Switch to Switch Point-to-Point Connection
Pair this 100BASE-BX-D bidi sfp module with a matched 100BASE-BX-U (Tx1310/Rx1550) module to build a full-duplex 15km optical link, requiring no complex configuration.

100BASE‑BX‑U BiDi SFP MODULE,Tx1310 Rx1550 20km

2.Switch to Media Converter Network Extension

Cooperate with optical media converters to extend traditional Ethernet transmission distance, widely used in outdoor monitoring, remote community broadband access and legacy network upgrade projects.
HYTOPTODEVICE 100BASE‑BX‑U BiDi SFP Transceiver,Tx1310 Rx1550 20km
Core Product Features

1.Boost Existing Fiber Utilization Using BiDi SFP
Advanced single-fiber WDM bidirectional transmission technology enables uplink and downlink data transmission via only one fiber core, saving 50% fiber resources and greatly reducing cabling and infrastructure costs for fiber-limited scenarios.
hytoptodevice bidi sfp transceiver module 100BASE-BX SIMPLEX LC smf
 

2. Low-Power Data Center Efficient Connectivity

Optimized low-power chip design with power consumption below 1W, reducing long-term equipment operating energy consumption while maintaining stable 100Mbps full-rate transmission.


HYTOPTODEVICE Bulk Wholesale Fiber‑Saving bidi Optical Transceiver  Module

3. Rigorous Host Device Testing for Full Cross-Brand Interoperability

All modules undergo batch compatibility testing on Alcatel-Lucent/Nokia and multi-brand devices. Custom firmware ensures zero-alarm operation and universal interoperability.


hytoptodevice  compatible Fast‑Ethernet BiDi Transceiver 20km Simplex LC 100BASE-BX

4.Comprehensive Factory Testing Delivers Consistent Stable Performance

Each module passes optical power calibration, high-low temperature aging, DDM function detection and long-term link testing to ensure consistent batch quality and long-term stable operation.

high-performance 155M bidi sfp module testing for global importers and distributors


FAQ

Q1: Why can’t two identical H3C 15km Tx1550/Rx1310 BiDi modules establish a normal network link?
A: BiDi single-fiber transmission relies on wavelength division multiplexing for separate sending and receiving channels. Installing two identical Tx1550/Rx1310 100BASE-BX-D modules on both ends causes channel conflict and complete link failure. Our H3C SFP-FE-LX-SM1550-BIDI compatible modules must pair with Tx1310/Rx1550 BX-U modules. We provide matched module sets to eliminate on-site pairing errors for H3C project deployments.

Q2: Can H3C 100BASE-BX single-fiber modules communicate with traditional dual-fiber LX transceivers?
A: Interconnection is not supported. Single-fiber 100BASE-BX-D BiDi modules and dual-fiber 100BASE-LX modules adopt different optical transmission architectures and protocol logics, making cross-type signal identification impossible. Our dedicated H3C BiDi modules only work with matched single-fiber BX series modules for standard compliant networking.

Q3: Why do generic third-party modules trigger alarm prompts on H3C switches?
A: Official H3C network devices verify module EEPROM signature data by default. Most generic modules lack certified firmware matching the SFP-FE-LX-SM1550-BIDI specification, triggering unrecognized transceiver warnings. Our modules are pre-flashed with H3C-original verified firmware to achieve zero-alarm plug-and-play recognition for batch deployment.

Q4: Is manual port speed and duplex configuration required for H3C-compatible BiDi modules?
A: No manual tuning is needed. All our 15km 100BASE-BX-D BiDi modules support automatic speed and duplex negotiation, perfectly matching the 100Mbps full-duplex operating mode of H3C Fast Ethernet ports. The plug-and-play design greatly simplifies large-scale network deployment and daily maintenance work.

Q5: Can 15km-rated H3C BiDi modules work stably for short-distance wiring under 1km?
A: Yes, this module supports adaptive operation for both short and medium distances ranging from 500m to 15km. Built-in optical power anti-saturation protection avoids signal overload and receiver damage without needing external attenuators, adapting to diverse on-site wiring scenarios for enterprise engineering projects.

Q6: What power budget guarantees stable 15km transmission for H3C 100BASE-BX-D links?
A: Our H3C SFP-FE-LX-SM1550-BIDI compatible modules adopt a 15dB professional optical power budget, precisely calibrated for 15km single-mode fiber transmission. This sufficient margin offsets fiber attenuation, joint splicing loss and connector insertion loss, ensuring error-free stable 100Mbps data transmission for medium-range enterprise networking.

Q7: What type of interface does this H3C 15km BiDi transceiver adopt?
A: This module is equipped with a standard simplex LC interface. Different from dual-core LC modules that require two fiber strands, it completes bidirectional signal transmission via only one single-mode fiber core, saving half of fiber resources and reducing project cabling costs, ideal for fiber-insufficient network upgrades.

Q8: Which patch cord is suitable for H3C SFP-FE-LX-SM1550-BIDI module connection?
A: Standard blue UPC simplex LC patch cords are the only recommended option. This H3C-specific BiDi module is optimized for UPC flat end-face links. APC end-face jumpers will cause excessive insertion loss, leading to unstable signals and random packet loss during 15km transmission. We provide supporting accessory packages for one-stop procurement.

Q9: Does 100BASE-BX-D standard support full-duplex synchronous 100Mbps transmission?
A: Fully supported. By adopting WDM wavelength division technology, the module separates upstream and downstream signals on a single fiber core, enabling simultaneous sending and receiving of 100Mbps data without bandwidth loss or delay. It meets high-stability transmission demands for enterprise monitoring, office networking and ISP broadband access.

Q10: Do H3C 15km BiDi modules support hot-swap online replacement?
A: All our H3C compatible transceivers comply with MSA international hot-swap standards. Users can plug and replace modules online without shutting down switches or interrupting network services, effectively reducing enterprise maintenance downtime and ensuring 7×24-hour stable network operation.

Q11: Are the laser signals of 100BASE-BX-D BiDi modules safe for operation?
A: This H3C dedicated BiDi module adopts Class 1 safe laser chips that meet global safety certification standards. The low-power laser signal causes no harm to human eyes and body during installation, debugging and long-term operation, supporting safe long-term batch deployment in commercial and industrial network environments.

Q12: How to maintain idle BiDi SFP modules to extend service life?
A: When the module port is idle, please install the matched dust-proof cap in time to block dust, moisture and oil contamination. This daily maintenance avoids optical channel pollution and signal attenuation, effectively reducing failure rates and extending the service life of batch deployed H3C network equipment.

Packaging & Custom OEM Solutions

Each Bidi module is factory-sealed in ESD-shielding, anti-static packaging—individually protected, quality-checked, and ready to ship the moment you place your order. We understand that distributors, wholesalers, and system integrators need more than just a product. That's why our flexible OEM and ODM programs include custom branding, private-label packaging, and your own logo on every unit—so you can grow your brand with confidence, without compromising on quality or lead time.
HYTOPTODEVICE 1000base-bx bidi transceiver  custom packaging


Why Network Engineers Choose HYTOPTODEVICE

HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
  • 100% hardware-tested compatibility with Cisco, Huawei,Dell,Juniper, and Arista
  • ISO 9001:2015 certified manufacturing facility in Shenzhen
  • Full product range coverage:1.25G/10G/25G/40G/100G/200G/400G/800G/1.6T
  • In-stock supply & fast global shipping, average lead time of 3–5 business days with DHL/FedEx express options
  • Dedicated pre-sales engineering support for custom configurations
  • Actual hardware,actual switches,actual results.we publish compatibility test video,eliminate compatibility anxiety. you can watch before you buy. 
  • We can provide inspection and shipping videos to make you feel as if you are right here with the product.
  • Private Label support - EEPROM / firmware customization support

“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia

Quality Certification & Compliance

 At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.

We adhere to rigorous standards for our SFP modules and network solutions:

  • ISO 9001: Certified quality management and production consistency.

  • CE & FCC: Fully compliant for seamless Global Market Access.

  • RoHS: Committed to environmental responsibility and hazardous material control.

  • Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.

Certified Quality. Global Standards. Guaranteed Performance.




Rigorous Industrial Product Testing

   

100% 3rd Party Compatible

Partial Test Demonstration

Others

  • 15km 100BASE-BX-D SFP BiDi Module, H3C SFP-FE-LX-SM1550-BIDI compatible Tx1550 Rx1310 simplex LC single mode fiber transceiver
  • Bulk supply H3C compatible single fiber SFP BiDi module with DDM, 15km long-range optical transceiver for enterprise network
  •  100base-bx-D TX1550nm RX310nm fiber port detail bidirectional sfp transceivers 15km
  •  hytoptodevice 100M 15km BiDi SFP transceiver compatible, simplex‑LC for cost‑saving long‑range fiber link upgrade

Download