• Industrial‑grade 100BASE‑FX 1310nm 2km MMF rugged SFP transceiver compatible with Cisco industrial switches
  • Bulk wholesale wide‑temperature 100Mbps MMF industrial SFP module for harsh environment network deployment
  • DDM‑supported rugged 100BASE‑FX SFP transceiver with real‑time optical diagnosis for industrial networking
  • Low‑latency 2km 1310nm industrial MMF SFP module for outdoor and factory network renovation
  • Industrial‑grade 100BASE‑FX 1310nm 2km MMF rugged SFP transceiver compatible with Cisco industrial switches
  • Bulk wholesale wide‑temperature 100Mbps MMF industrial SFP module for harsh environment network deployment
  • DDM‑supported rugged 100BASE‑FX SFP transceiver with real‑time optical diagnosis for industrial networking
  • Low‑latency 2km 1310nm industrial MMF SFP module for outdoor and factory network renovation

Cisco GLC-FE-100FX-RGD  Compatible 100BASE-FX SFP Optical Transceiver(Industrial) | 1310nm 2km MMF Bulk Wholesale | HYTOPTODEVICE

Industrial grade Cisco GLC‑FE‑100FX‑RGD compatible 100BASE‑FX SFP optical transceiver. 1310nm 2km multimode fiber SFP module with DDM support. Rugged wide‑temperature SFP for harsh industrial Fast‑Ethernet networking, factory direct bulk wholesale. Support bulk wholesale, private label, custom EEPROM programming and OEM for global importers, distributors and system integrators.
NO. Brand  Compatible P/N Transceiver Types
1 Cisco  GLC-FE-100FX-RGD  SFP-M31-10LD
2 Cisco GLC-FE-100FX SFP-M31-40LD
3 Brocade  E1MG-100FX-OM  SFP-M55-80LD
4 Juniper  EX-SFP-1FE-FX  SFP-M55-1BLD
5 H3C  SFP-FE-SX-MM1310-A  SFP-M55-1CLD
6 HPE(H3C)  JD102A
7 HPE(Procurve)  J9054B
8 Palo Alto Networks  PAN-SFP-100BASE-FX
9 Extreme MGBIC-LC04
10 D-Link DEM-211
Description

Cisco GLC‑FE‑100FX‑RGD Compatible 100BASE‑FX SFP Optical Transceiver(Industrial) | 1310nm 2km MMF Bulk Wholesale | HYTOPTODEVICE

Product Overview

HYTOPTODEVICE Cisco GLC‑FE‑100FX‑RGD compatible industrial SFP optical transceiver is a fully compliant drop‑in replacement for original Cisco rugged‑range 100BASE‑FX multimode modules. Designed for harsh industrial Fast‑Ethernet networking, this 1310nm MMF SFP transceiver supports stable 2‑kilometer transmission over standard OM1/OM2 multimode fiber, perfectly matching official GLC‑FE‑100FX‑RGD protocol and optical performance specifications.
Custom‑calibrated EEPROM firmware enables zero‑alarm plug‑and‑play recognition on all Cisco industrial dual‑rate 100M/1G SFP ports, requiring no manual configuration or command unlocking. Every industrial‑grade 100BASE‑FX SFP module undergoes strict wide‑temperature aging testing and optical parameter calibration for consistent batch quality. It is the ideal cost‑effective solution for industrial site network renovation, multimode fiber link deployment and large‑volume bulk wholesale projects.

Key Technical Specifications

 Cisco Compatible GLC-FE-100FX-RGD Vendor Name HYTOPTODEVICE
Form Factor SFP Max Data Rate 100Mbps
Wavelength 1310nm Max  Distance 2KM
Connector Duplex LC Transmitter Type FP 1310nm
Cable Type MMF Receiver Type PIN
TX Power -18~-10dBm Receiver Sensitivity < -26.0dBm
Power Consumption ≤1W Receiver Overload -8.0dBm
Protocols IEEE802.3ab, GR-468, MSA Compliant Operation Temperature -40 to 85°C (-40 to 185°F)

For detailed technical specifications, please refer to the Datasheet


Usage Guidelines & Best Practices

  • Fiber & Port Matching

    Use standard 50/125µm or 62.5/125µm duplex multimode fiber (MMF) with LC-PC/UPC connectors. Single-mode fiber is not supported and will fail to reach 2km. Ensure the SFP port supports 100Mbps mode before insertion.

  • Installation & Hot-Swap Rules

    Supports MSA-compliant hot-swapping. Insert/remove gently without powering down the device. Keep dust caps on unused LC ports and avoid frequent re-plugging.

  • Link Loss Budget

    Offers a 8–16dB link budget for 2km reach (including connectors/splices). If link flapping occurs, inspect and clean optical interfaces.

  • Operating Environment

    Commercial grade: 0°C to 70°C in indoor environments. For outdoor, high temperature, or harsh environments, select Industrial Grade (-40°C to 85°C). Keep away from extreme moisture and dust for long-term stability.

  • Real-Time Monitoring (DDM)

    Use integrated SFF-8472 DDM to monitor Tx/Rx power, temperature, and voltage in real time to prevent sudden outages.

  • Bulk Deployment

    Standardize fiber types and port settings across enterprise LAN or industrial networks for consistent performance.

For detailed operation instructions, please refer to the User Guide.


Full Compatibility List & Supported Network Hardware

1. Supported Hardware & Firmware
 
Specially tuned firmware matches Cisco official authentication protocols, enabling zero‑warning, zero‑error operation on all Cisco industrial Fast Ethernet and dual‑rate SFP ports without transceiver mismatch logs or port shutdown issues.
  • Cisco Catalyst 2960 / 3560 / 3750 Fast Ethernet Switch Series
  • Cisco ISR 1900 / 2900 / 3900 Router SFP Ports
  • Cisco Industrial Ethernet & SmartGrid Network Platforms
  • Universal Cisco 100M/1000BASE-X dual-rate SFP ports

2. Multi-Brand Cross Compatibility

This industrial‑grade 100BASE‑FX SFP transceiver complies with global MSA industry standards, supporting stable interconnection with mainstream brand network devices. Custom firmware is available for mixed‑vendor multimode fiber network bulk deployment.

3. Free Value-Added Services

We offer exclusive free value-added services for all  sfp optical transceivers  to reduce your project deployment and maintenance costs.
  • Custom firmware for multi-device compatibility
  • Free sample testing before bulk orders
  • Complete test reports for project acceptance
  • Strict batch consistency quality control
  • Cost-effective wholesale for large-scale deployment
  • Free custom EEPROM programming for special and legacy network environments

Primary Application Scenarios

  • Factory floor short‑distance multimode fiber interconnection under harsh temperature conditions
  • Outdoor cabinet, industrial workshop and monitoring system fiber transmission links
  • Legacy Cisco industrial Fast Ethernet multimode network SFP module replacement
  • Industrial park, mining and transportation site fiber network construction
  • Bulk upgrade and reconstruction of existing rugged multimode fiber network links

Connectivity Solutions(Applications)

1.100BASE to 100BASE for Switch-Switch
Pair two GLC-FE-100FX-RGD SFP modules with OM1/OM2/OM3/OM4 multimode fiber to build 100Mbps point-to-point fiber links up to 2km, ideal for various industrial network scenarios.

Rugged 100Mbps multimode interconnection for factory & site networks

2.100BASE to 100BASE for Switch-Media Converter

Use GLC-FE-100FX SFP-RGD on Cisco switches with a 100BASE-FX media converter to realize optical-to-electrical conversion, enabling RJ45 legacy devices to join fiber network smoothly.
Industrial 100BASE‑FX Switch to Media Converter: Optical‑electrical conversion for industrial legacy RJ45 devices

3.100BASE Structured Cabling

Deploy GLC-FE-100FX SFP-RGD modules as standard fiber access ports for enterprise layered structured cabling, realizing unified, scalable 100Mbps multimode fiber network deployment.
Rugged multimode wiring for scalable industrial network deployment

The Core Feature

1. Low-Power Data Center Efficient Connectivity

Fully compliant with IEEE 802.3u and MSA SFP standards. This wide‑temperature 1310nm multimode SFP transceiver delivers consistent 100Mbps/2km stable transmission with low power consumption and real‑time DDM optical diagnosis.

Low Latency 2km 1310nm MMF SFP Module for Cisco Legacy Network Renovation


2.
Verified Host Interoperability for Devices

Pre-flashed EEPROM supports hot-swap plug-and-play. The module is fully recognized by mainstream Cisco devices without alarms or configuration adjustments, enabling seamless network replacement and upgrade.Specific Compatibility Video available upon request.
Zero-Alarm Plug and Play 100BASE-FX SFP Transceiver for Cisco Fast Ethernet Devices

3.Rigorous Testing, Uncompromising Reliability

100% factory tested and aged SFP transceiver with uniform batch quality, ideal for large-scale replacement and bulk procurement of Cisco multimode fiber modules.

Factory Tested 100BASE-FX MMF SFP Module for Enterprise Bulk Procurement Projects


FAQ

Q1: Can industrial GLC‑FE‑100FX‑RGD 100BASE‑FX SFP work with single‑mode fiber (SMF)? A: No. GLC‑FE‑100FX‑RGD is industrial‑grade multimode dedicated 100BASE‑FX SFP transceiver designed exclusively for OM1/OM2 MMF. Single‑mode fiber brings severe signal attenuation and no link up. Always adopt qualified multimode fiber for this Cisco compatible rugged SFP module.

Q2: What is the maximum reliable transmission distance for GLC‑FE‑100FX‑RGD industrial SFP transceiver?
A: Standard working distance reaches 2 km over compliant multimode fiber. Even with industrial hardware, running beyond 2 km will raise bit error rate, trigger packet loss and unstable link flapping under long‑term harsh‑environment operation.

Q3: Can industrial‑grade 100BASE‑FX MMF SFP interconnect with ordinary 100BASE‑LX SMF modules?
A: Interconnection is unsupported. 100BASE‑FX uses multimode transmission while 100BASE‑LX applies single‑mode fiber. Mismatched fiber medium, core size and optical power budget result in total link failure with no normal communication.

Q4: Will third‑party GLC‑FE‑100FX‑RGD SFP trigger Cisco unsupported‑transceiver errors?
A: Our customized GLC‑FE‑100FX‑RGD industrial SFP transceiver uses Cisco‑matched EEPROM firmware to pass official device authentication. It will not trigger unsupported‑transceiver logs, port errors or shutdown restrictions on Cisco industrial switches and routers.

Q5: Can gigabit SFP ports auto‑negotiate with industrial 100BASE‑FX 100Mbps SFP module?
A: Yes. Cisco dual‑rate 100M1G SFP ports support automatic speed negotiation and downgrade. This GLC‑FE‑100FX‑RGD SFP transceiver can be recognized automatically and locked at 100 Mbps without manual port configuration.

Q6: Why industrial‑100BASE‑FX MMF link shows link‑down without visible physical damage?
A: Typical causes include mixed singlemultimode fiber, dirty LC connector end faces, insufficient fiber bending radius or incorrect port duplex‑rate settings. Cleaning connectors and confirming MMF matching solves most link‑down failures.

Q7: What is the difference between industrial‑grade and commercial‑grade 100BASE‑FX SFP transceiver?
A: Industrial SFP supports ‑40℃~+85℃ wide temperature range for factory, outdoor cabinet and harsh‑site deployment. Commercial grade only works within 0‑70℃ and cannot sustain extreme cold or high‑temperature industrial field conditions.

Q8: Does GLC‑FE‑100FX‑RGD rugged SFP module support DDM DOM monitoring on Cisco industrial equipment?
A: Yes. This compatible industrial SFP transceiver integrates complete SFF‑8472 DDM/DOM function. Cisco industrial devices can read real‑time optical power, temperature and voltage data for daily operation and fault troubleshooting.

Q9: Can I use GLC‑FE‑100FX‑RGD for fully exposed outdoor installation?
A: This SFP itself supports wide‑temperature range, yet it is not waterproof. It must be installed inside sealed IP‑rated cabinet for outdoor scenarios; direct rain‑splashing and dew condensation shall be avoided.

Q10: Will using compatible GLC‑FE‑100FX‑RGD SFP void my Cisco industrial switch warranty?
A: No. Our industrial‑grade 100BASE‑FX SFP transceiver fully complies with MSA and IEEE industry standards, delivering standard optical parameters and electrical signals. It causes no hardware damage or protocol conflicts to Cisco equipment and will not void original device warranty.

Q11: Why do industrial multimode‑100BASE‑FX links occasionally suffer packet loss?
A: Multimode fiber has inherent mode dispersion. Aged MMF cables, improper laying, contaminated connectors or excessive temperature fluctuation will amplify packet loss. Deploy high‑quality OM2 fiber and keep regular port cleaning to optimize link stability.

Q12: UPC or APC connector for GLC‑FE‑100FX‑RGD industrial SFP deployment?
A: Standard UPC‑polished LC connectors are mandatory for GLC‑FE‑100FX‑RGD 100BASE‑FX SFP modules. APC connectors produce excessive reflectance and insertion loss, resulting in unstable MMF links, random flapping and packet loss.

Packaging & Custom OEM Solutions

Each sfp module is individually sealed in ESD-safe anti-static packaging and ready for immediate shipment. For high-volume distributors, wholesalers, and system integrators, we offer flexible OEM programs—including custom logos, private labeling, and branded packaging—to help you build and protect your own brand.
HYTOPTODEVICE 1000base-bx bidi transceiver  custom packaging


Why Network Engineers Choose HYTOPTODEVICE

HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
  • Up to 70% cost savings vs OEM, transparent pricing & flexible bulk rates, supported quality returns
  • 100% real-device compatible with Cisco, Huawei,Dell,Juniper, and Arista
  • ISO 9001:2015 Shenzhen factory, full lineup: 1.25G/10G/25G/40G/100G/200G/400G/800G/1.6T transceivers
  • Ample stock, fast global DHL/FedEx shipping in 3–5 working days
  • Free pre-sales engineering support for custom EEPROM  & private label firmware
  • Real switch test videos available for pre-purchase review; inspection & shipping videos provided per order


“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia


Quality Certification & Compliance

 At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.

We adhere to rigorous standards for our SFP modules and network solutions:

  • ISO 9001: Certified quality management and production consistency.

  • CE & FCC: Fully compliant for seamless Global Market Access.

  • RoHS: Committed to environmental responsibility and hazardous material control.

  • Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.

Certified Quality. Global Standards. Guaranteed Performance.




Rigorous Industrial Product Testing

   hytoptodevice check device and equiptment for optical transceiver module

100% 3rd Party Compatible
hytoptodevice 100g qsfp28 sr4 replacement
Partial Test Demonstration
hytoptodevice compatible optical transceiver module for ethernet,data center

Others
HYTOPTODEVICE 100G QSFP28 TRANSCEIVER sr4 application for data center,ethernet

 

  • Industrial‑grade 100BASE‑FX 1310nm 2km MMF rugged SFP transceiver compatible with Cisco industrial switches
  • Bulk wholesale wide‑temperature 100Mbps MMF industrial SFP module for harsh environment network deployment
  • DDM‑supported rugged 100BASE‑FX SFP transceiver with real‑time optical diagnosis for industrial networking
  • Low‑latency 2km 1310nm industrial MMF SFP module for outdoor and factory network renovation

Download