Huawei eSFP-GE-ZX100-SM1550 Compatible1000BASE-EZX Optical Module | SFP 1550nm 100km SMF Bulk Factory Wholesale | HYTOPTODEVICE

Usage Guidelines & Best Practices

• Fiber Choice: Use Single-Mode Fiber (SMF) only. Do NOT use MMF
• Laser Safety: Never look directly into optical ports or fiber ends.

• ESD Safety:: Wear an anti-static wrist strap before handling.

• Connector Match: UPC/PC polish only. Do NOT use APC

• Cleanliness & Dust: Keep dust caps on all unused ports and connectors at all times. Clean fiber end-faces with a optical cleaning pen before insertion; dust causes over 80% of optical link failures.

• Optical Attenuator Required for Short Links: For testing or short-distance connections (<10 km), connect a 10dB–15dB optical attenuator to the RX port to prevent damaging the receiver.

Full Compatibility List and Supported Devices

1. Supported Hardware & Firmware

2. Multi-Brand Cross Compatibility

3. Free Value-Added Services

Main Application Scenarios

• Ultra-Long-Haul Backbone Networking: 100km Huawei-compatible optical transceiver for cross-city and remote regional fiber link deployment to extend network coverage.
• Network Distributor Bulk Stocking: Cost-effective optical transceiver bulk supply lowers inventory costs for network equipment wholesalers and suppliers.
• Huawei Network Distance Upgrade: Replace short-range modules with 100km long-haul optical transceivers to break original network transmission distance limits.
• Remote Campus & Branch Links: Low-loss 1550nm optical transceiver stabilizes signal transmission for long-distance connection of enterprise branches and remote campus Huawei network systems.

Connectivity Solutions(Applications) 

1.1GbE Switch-to-Switch Connectivity


2.1GbE Switch to Media Converter Connectivity

3.1G Structured Cabling

The Core Feature

1. Low-Power, Cost-Effective Long-Haul Connectivity

Designed for high-reliability data center networks, this 1.25G 1550nm optical module supports long-reach transmission up to 100km. Featuring low power consumption and high cost-efficiency, it is the ideal choice for expanding your Gigabit Ethernet coverage.

2.Host-Tested for Proven Interoperability

All transceiver modules pass real device testing. Pre-flashed EEPROM ensures zero-alarm recognition, fixing third-party module incompatibility and link flapping for safe bulk purchase.Specific Compatibility Video available upon request.

3.100% Tested for Zero-Defect Reliability

Step inside our  Test Center  to see every optical module is 100% tested before shipment, ensuring zero-defect reliability and maximum uptime for your network.

FAQ

Q1: How to troubleshoot unstable optical links and distinguish module hardware faults on Huawei switches?
A: To quickly locate faults on Huawei switches, check DDM data of HYTOPTODEVICE Huawei eSFP-GE-ZX100-SM1550 compatible modules. Fluctuating optical power indicates dirty ports or faulty fiber links, while persistent zero power and device alarms confirm SFP hardware failure for 100km long-haul links.

Q2: How to fix loose insertion and latching failure of Huawei compatible 100km SFP modules?
A: Loose latching mostly results from slot dust or incorrect insertion. Clean Huawei switch slot contacts, then plug in HYTOPTODEVICE 1000BASE-EZX 100km modules vertically until locked firmly, avoiding forced installation to prevent hardware damage.

Q3: Are Huawei 100km long-range optical modules durable after frequent plugging and maintenance?
A: Very durable. HYTOPTODEVICE Huawei-compatible 100km SFP modules adopt high-strength latch structures, passing strict plugging tests. They maintain stable contact and continuous link performance even after frequent daily maintenance operations.

Q4: Why cannot fiber patch cords lock firmly with the LC port of Huawei 1000BASE-EZX modules?
A: Poor locking is caused by worn cords, dirty ports or mismatched end faces. HYTOPTODEVICE Huawei eSFP-GE-ZX100-SM1550 modules only support UPC jumpers; clean ports and replace aging patch cords to ensure tight, stable LC connection.

Q5: Will third-party compatible SFP modules cause installation conflicts on high-density Huawei switch ports?
A: No conflicts. All HYTOPTODEVICE Huawei 100km optical modules strictly follow MSA standard dimensions, fitting high-density Huawei switch slots perfectly. Standardized size ensures smooth installation and unobstructed heat dissipation for dense deployment.

Q6: What network risks are caused by overheating of 100km SFP modules in dense Huawei switch cabinets?
A: Module overheating leads to wavelength drift, power attenuation and packet loss, even port shutdown. HYTOPTODEVICE Huawei-compatible EZX modules adopt optimized heat dissipation design, effectively avoiding overheating faults in high-density cabinet environments.

Q7: Can Huawei long-haul EZX modules start normally under ultra-low outdoor temperature conditions?
A: Yes. Ordinary long-haul modules suffer laser attenuation at low temperatures, while HYTOPTODEVICE Huawei eSFP-GE-ZX100-SM1550 modules complete professional low-temperature calibration, supporting stable cold start and consistent 100km transmission in outdoor cabinet scenarios.

Q8: How to protect Huawei 100km optical transceivers from damage in humid and coastal industrial environments?
A: High humidity and salt fog erode module ports and lasers. Equip HYTOPTODEVICE Huawei long-haul modules with dust caps and sealed cabinets; industrial-grade customized versions are also available for harsh coastal and humid environments.

Q9: Is concentrated deployment of multiple 100km SFP modules likely to cause local overheating on Huawei switch panels?
A: Reasonable deployment avoids hot spots. HYTOPTODEVICE Huawei-compatible 100km SFP modules adopt low-power chips and efficient heat dissipation, preventing local heat accumulation even with dense installation on Huawei switch panels.

Q10: Why do SFP module DDM monitoring data differ from external optical power meter test results?
A: Minor deviation is normal due to different test standards. Large errors come from dirty ports or uncalibrated equipment. HYTOPTODEVICE Huawei eSFP-GE-ZX100-SM1550 modules support high-precision DDM calibration for accurate real-time link monitoring.

Q11: Does SFP DDM monitoring support early fault warning for Huawei long-distance fiber links?
A: Yes. HYTOPTODEVICE Huawei-compatible optical modules feature full DDM threshold warning, which monitors power, temperature and voltage in real time. It triggers automated system alerts to pre-judge 100km link faults and reduce network outage risks.

Q12: What causes slow or delayed DDM data refresh in Huawei network management systems?
A: Delayed refresh relates to switch polling frequency and system bandwidth. HYTOPTODEVICE 1000BASE-EZX modules optimize data output protocols, matching Huawei devices to ensure timely and smooth DDM data update for daily O&M.

Q13: Do third-party Huawei compatible optical modules retain complete DDM monitoring functions?
A: Fully functional. HYTOPTODEVICE third-party Huawei eSFP-GE-ZX100-SM1550 modules inherit complete standard DDM monitoring, supporting full-data real-time detection and perfect compatibility with Huawei network management platforms.

Q14: What leads to premature failure of low-cost 100km long-range optical modules after long-term operation?
A: Inferior modules use uncalibrated lasers and poor heat dissipation structures, causing aging and failure. HYTOPTODEVICE Huawei long-haul modules undergo strict aging and calibration tests, supporting stable 24/7 continuous operation.

Q15: How does ESD static electricity affect the service life and stability of 100km SFP optical modules?
A: Static electricity easily burns laser chips and causes link failure. HYTOPTODEVICE Huawei eSFP-GE-ZX100-SM1550 modules adopt built-in ESD protection circuits, resisting static damage during installation and ensuring long-term stable network operation.

Packaging Options & Custom‑Packaging Solutions

Every transceiver module gets reliable ESD‑safe packaging out of the box. Standard packing is ready for immediate shipment, while custom‑printed packaging with your logo is available for bulk orders.

Why Network Engineers Choose HYTOPTODEVICE

HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.

• 100% MSA-compliant modules with Cisco, Huawei,Dell,Juniper, and Arista compatibility
• ISO 9001:2015 certified manufacturing facility in Shenzhen
• Average lead time of 3–5 business days with DHL/FedEx express options
• Dedicated pre-sales engineering support for custom configurations
• Actual hardware,actual switches,actual results.we publish compatibility test video,eliminate compatibility anxiety. you can watch before you buy. 
• We can provide inspection and shipping videos to make you feel as if you are right here with the product.

"We replaced 200 Cisco-branded SFPs with HYTOPTODEVICE equivalents across our spine layer — zero compatibility issues, 40% cost reduction."— Network Architect, Tier-2 ISP, Germany

Quality Certification & Compliance

 At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final inspection, our processes ensure global compliance and reliability.

We adhere to rigorous standards for our SFP modules and network solutions:

• ISO 9001: Certified quality management and production consistency.

• CE & FCC: Fully compliant for seamless Global Market Access.

• RoHS: Committed to environmental responsibility and hazardous material control.

• Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.

Certified Quality. Global Standards. Guaranteed Performance.

Rigorous Industrial Product Testing

   

100% 3rd Party Compatible

Partial Test Demonstration

Others