| NO. | Brand | Compatible P/N | Transceiver Type |
| 1 | Cisco | GLC-EZX-SM-100 | SFP-G85-5LD |
| 2 | Arista Networks | SFP-1G-EZX-100 | SFP-G31-10LD |
| 3 | Huawei | eSFP-GE-ZX100-SM1550 | SFP-G31-40LD |
| 4 | Juniper Networks | SFP-1GE-EZX-100 | SFP-G55-80LD |
| 5 | Brocade | E1MG-EZX-100 | SFP-G55-120LD |
| 6 | HPE H3C | JD103A | SFP-G55-160LD |
| 7 | H3C | SFP-GE-LH100-SM1550 | |
| 8 | Dell | SFP-EZX-100 | |
| 9 | Extreme Networks | 10064H | |
| 10 | Ruijie | MINI-GBIC-ZX100-SM1550 |
| Brocade Compatible | E1MG-EZX-100 | Vendor Name | HYTOPTODEVICE |
| Form Factor | SFP | Max Data Rate | 1.25Gbps |
| Wavelength | 1550nm | Max Distance | 100km |
| Connector | Duplex LC | Transmitter Type | DFB 1550nm |
| Cable Type | SMF | Receiver Type | APD |
| TX Power | 0~5dBm | Receiver Sensitivity | < -30.0dBm |
| Typical Power Consumption | ≤1W | Receiver Overload | -8dBm |
| Bit Error Ratio (BER) | 1E-12 | DDM/DOM | Support |
| Protocols | SFF-8472 MSA Compliant, IEEE 802.3ah-2004 | Operation Temperature | 0 to 70°C (32 to 158°F) |
Usage Guidelines & Best Practices
Connector Match: UPC/PC polish only. Do NOT use APC
Cleanliness & Dust: Keep dust caps on all unused ports and connectors at all times. Clean fiber end-faces with a optical cleaning pen before insertion; dust causes over 80% of optical link failures.
Optical Attenuator Required for Short Links: For testing or short-distance connections (<10 km), connect a 15dB–20dB optical attenuator to the RX port to prevent damaging the receiver.
Installation & Hot-Swap Rules:MSA hot-swappable. Insert/remove gently without powering down.
High Loss/Packet Drops: Check fiber bend radius (>30 mm); inspect optical power levels; clean optical connectors
No Link: Swap TX/RX fiber connections; clean fiber end-faces; verify port settings.
Links to the Datasheet, User Guide and Compatibility Guides are available on the product page.
Full Compatibility List and Supported Devices
1. Supported Hardware & Firmware
Main Application Scenarios






Q1: What fiber cable type should buyers use for Brocade E1MG-EZX-100 compatible 1000BASE-EZX SFP module? A: This 1000BASE-EZX SFP transceiver must use single mode fiber. HYTOPTODEVICE Brocade E1MG-EZX-100 compatible module reaches full 100km over OS2 SMF. Multimode fiber cannot be used for this long-range transmission and will result in link failure.
Q2: Will this third-party Brocade E1MG-EZX-100 SFP trigger unsupported transceiver alerts on Brocade network hardware? A: No, pre-flashed EEPROM prevents the unsupported transceiver alert. HYTOPTODEVICE 1000BASE-EZX SFP is programmed to match Brocade identity. Insert directly into Brocade SFP ports without extra configuration for stable operation.
Q3: Does this 1000BASE-EZX SFP module support DOM optical monitoring for network maintenance teams? A: Yes, DOM function is fully supported. HYTOPTODEVICE Brocade compatible SFP follows SFP MSA DOM standard. Engineers can check real-time transmit power, receive power and module temperature to quickly troubleshoot fiber link faults.
Q4: Can I use this 1000BASE-EZX SFP transceiver for links longer than 100km? A: No, 100km is the rated maximum reach. This module’s optical power budget is designed for up to 100km OS2 SMF. Longer distance will cause insufficient optical signal and unstable link; select EZX extended range amplifier or higher power optical modules instead.
Q5: Is hot swapping available for this 1000BASE-EZX SFP on powered Brocade switches? A: Yes, hot swap is supported. The SFP form factor allows plugging and unplugging while the Brocade switch stays powered on. Minimize frequent plug-and-unplug operations and protect LC port from contamination to avoid intermittent link issues.
Q6: Can this 1000BASE-EZX SFP auto negotiate to 100M speed on Brocade SFP ports? A: No, this transceiver locks at 1.25G gigabit rate. HYTOPTODEVICE Brocade E1MG-EZX-100 compatible module works for 1000BASE only. Manually set port speed on your Brocade device; pick 100BASE optical modules if you require 100Mbps fiber links.
Q7: What MSA standard defines mechanical and electrical specs for this 1000BASE-EZX SFP module? A: It follows SFP MSA specification. HYTOPTODEVICE 1000BASE-EZX SFP strictly complies with SFP MSA for mechanical dimensions, electrical interface and DOM monitoring. Verify MSA compliance when sourcing third-party SFP optics for legacy Brocade network deployment.
Q8: What temperature grades are available when ordering HYTOPTODEVICE 1000BASE-EZX SFP optical modules? A: Commercial grade is standard, industrial grade can be supplied on request. Commercial grade works at 0℃ ~ +70℃, industrial grade covers -40℃ ~ +85℃. Commercial version fits standard indoor server rooms; select industrial temperature modules for outdoor or uncontrolled cabinet environments.
Q9: How will fiber splices and patch panels affect the 100km transmission of 1000BASE-EZX SFP module? A: Splices and connectors add extra optical loss. Each fusion splice brings ~0.1dB loss and each connector pair adds ~0.5dB. Too many joints will consume the link budget and reduce effective transmission distance. Calculate total loss before project deployment.
Q10: What warranty is provided for HYTOPTODEVICE Brocade E1MG-EZX-100 compatible SFP modules? A: HYTOPTODEVICE provides a 3-year factory warranty for manufacturing defects. Warranty covers hardware failure under rated operating conditions. It excludes damage from dirty LC ports, ESD shock, improper handling or physical breakage. Raise RMA ticket to our support team for factory defective goods.
Q11: Can technicians reflash EEPROM on-site to make this 1000BASE-EZX SFP work for other vendor network gear? A: On-site EEPROM rewriting is not recommended. HYTOPTODEVICE SFP modules are pre-programmed in factory for target brand. If you need compatibility for non-Brocade hardware, order factory pre-flashed modules; field programming may permanently damage the optical transceiver.
Q12: Why original Brocade E1MG-EZX-100 modules cost much higher than compatible alternatives? A: OEM original modules carry brand licensing markup. Brocade original E1MG-EZX-100 includes brand premium, while core optical component cost remains similar. HYTOPTODEVICE compatible 1000BASE-EZX SFP is MSA compliant drop-in replacement with factory bulk pricing for volume buyers and integrators.
Q13: Is keeping spare 1000BASE-EZX SFP inventory recommended for legacy Brocade production networks? A: Yes, stocking spare modules is strongly advised. Brocade E1MG-EZX-100 is end-of-life, original OEM stock is limited with long lead time. HYTOPTODEVICE maintains ready stock for bulk orders, spare modules reduce downtime for long-range fiber network faults.
Q14: How to check received optical power after inserting this Brocade compatible 1000BASE-EZX SFP module? A: Real-time optical readings can be retrieved via Brocade CLI. After inserting HYTOPTODEVICE compatible SFP, run show interfaces transceiver command. If Rx power falls outside normal range, clean LC connectors or re-terminate single mode fiber before port activation.
Q15: What risks come with cheap unbranded long-range 1G SFP modules for fiber transmission projects? A: Low-cost generic optics carry multiple operation risks. Uncalibrated DFB laser, inaccurate DOM data, incomplete MSA compliance and insufficient burn-in test lead to high early failure rate. HYTOPTODEVICE 1000BASE-EZX SFP passes full aging test, avoid untested generic modules for production long-haul fiber links.

HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
"We replaced 200 Cisco-branded SFPs with HYTOPTODEVICE equivalents across our spine layer — zero compatibility issues, 40% cost reduction."— Network Architect, Tier-2 ISP, Germany
Quality Certification & Compliance
At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final inspection, our processes ensure global compliance and reliability.
We adhere to rigorous standards for our SFP modules and network solutions:
ISO 9001: Certified quality management and production consistency.
CE & FCC: Fully compliant for seamless Global Market Access.
RoHS: Committed to environmental responsibility and hazardous material control.
Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.
Certified Quality. Global Standards. Guaranteed Performance.






