• Cisco Meraki  MA-SFP-1GB-LX10 Compatible 1000BASE-LX  Pluggable Transceiver | SFP 1310nm 10KM SMF Bulk Wholesale | HYTOPTODEVICE
  • HYTOPTODEVICECisco Meraki  MA-SFP-1GB-LX10  pluggable transceiver  fix unrecognized alarm
  • hytoptodevice 1000BASE-LX 1310nm 10KM SMF pluggable transceiver for Cisco Meraki network devices
  • DDM supported gigabit Cisco Meraki  MA-SFP-1GB-LX10  compatible module solve link flapping
  • Bulk wholesale Cisco Meraki  MA-SFP-1GB-LX10  replacement pluggable transceiver HYTOPTODEVICE
  •  Bulk wholesale Cisco Meraki  MA-SFP-1GB-LX10  replacement pluggable transceiver  HYTOPTODEVICE
  • Cisco Meraki  MA-SFP-1GB-LX10 Compatible 1000BASE-LX  Pluggable Transceiver | SFP 1310nm 10KM SMF Bulk Wholesale | HYTOPTODEVICE
  • HYTOPTODEVICECisco Meraki  MA-SFP-1GB-LX10  pluggable transceiver  fix unrecognized alarm
  • hytoptodevice 1000BASE-LX 1310nm 10KM SMF pluggable transceiver for Cisco Meraki network devices
  • DDM supported gigabit Cisco Meraki  MA-SFP-1GB-LX10  compatible module solve link flapping
  • Bulk wholesale Cisco Meraki  MA-SFP-1GB-LX10  replacement pluggable transceiver HYTOPTODEVICE
  •  Bulk wholesale Cisco Meraki  MA-SFP-1GB-LX10  replacement pluggable transceiver  HYTOPTODEVICE

Cisco Meraki  MA-SFP-1GB-LX10 Compatible 1000BASE-LX Pluggable Transceiver | SFP 1310nm 10KM SMF Bulk Wholesale | HYTOPTODEVICE

Buy Cisco Meraki MA‑SFP‑1GB‑LX10 compatible 1000BASE‑LX pluggable transceiver from HYTOPTODEVICE. 1310nm 10KM SMF SFP pluggable transceiver fixes Meraki switch recognition alarms, full DDM support for bulk purchase. Bulk wholesale, private label, custom EEPROM programming and OEM available for global importers, distributors, wholesaler and system integrators.
NO. Brand  Compatible P/N Transceiver Type
1 Allied Telesis  AT-SPLX10  SFP-G85-5LD
2 Cisco Meraki  MA-SFP-1GB-LX10 SFP-G31-40LD
3 D-link  DEM-310GT SFP-G55-80LD
4 DELL  407-BBOO  SFP-G55-100LD
5 Extreme  I-MGBIC-GLX  SFP-G55-120LD
6 HPE Aruba  J4859D SFP-G55-160LD
7 HPE H3C  JD119A 
8 IBM BNT BN-CKM-S-LX
Description

Cisco Meraki MA‑SFP‑1GB‑LX10 Compatible 1000BASE‑LX Pluggable Transceiver | SFP 1310nm 10KM SMF Bulk Wholesale | HYTOPTODEVICE

Product Overview

HYTOPTODEVICE 1000BASE‑LX pluggable transceiver provides pin‑to‑pin compatibility with Cisco Meraki MA‑SFP‑1GB‑LX10. It resolves third‑party pluggable transceiver authentication alerts on Meraki devices.
This pluggable transceiver follows IEEE 802.3z and SFP MSA standards. It delivers stable 1.25Gbps transmission over single‑mode fiber.
Pre‑programmed with Meraki‑optimized EEPROM. Plug and play, no extra config needed. Each pluggable transceiver passes aging and Meraki compatibility testing for bulk deployment.

Key Technical Specifications 

Cisco Meraki Compatible  MA‑SFP‑1GB‑LX10 Vendor Name HYTOPTODEVICE
Form Factor SFP Max Data Rate 1.25Gbps
Wavelength 1310nm Max Distance 10km 
Connector Duplex LC Transmitter Type 1310nm FP
Cable Type SMF Receiver Type PIN
TX Power -9.0~-3.0dBm Receiver Sensitivity < -22.0dBm
Typical Power Consumption ≤1W Receiver Overload -3dBm
Bit Error Ratio (BER) 1E-12 DDM/DOM Support
Protocols SFF-8472 MSA Compliant, IEEE 802.3ah-2004 Operation Temperature 0 to 70°C (32 to 158°F)


Usage Guidelines & Best Practices

  • Fiber Choice: Duplex LC OS1/OS2 SMF (9/125 µm). Do NOT use MMF

  • Connector Match: UPC/PC polish only. Do NOT use APC.

  • Cleanliness & Dust: Keep dust caps on whenever unattached. Clean fiber end-faces with a optical cleaning pen before insertion; dust causes over 80% of optical link failures.

  • Link Setup:Lock speed to 1.25Gbps (Full Duplex) manually if auto-negotiation fails.

  • Handling: Wear ESD protection. Keep fiber bend radius ≥ 30 mm.

  • Installation & Hot-Swap Rules:MSA hot-swappable. Insert/remove gently without powering down.

  • Environment:Commercial grade (0°C to 70°C). Avoid extreme heat, moisture, and dust.

  Links to the Datasheet, User Guide and Compatibility Guides are available on the product page.

Full Compatibility List and Supported Devices 

1. Supported Hardware & Firmware

This pluggable transceiver is validated for Meraki hardware. It avoids third‑party module alarms and supports full DDM readout:
  • Meraki MS Switches: MS120, MS125, MS130, MS210, MS225, MS250, MS350 series
  • Meraki MX Security Appliances: MX series with SFP gigabit uplink ports
  • Meraki Access & Aggregation Hardware: All Meraki gear supporting original MA‑SFP‑1GB‑LX10 pluggable transceiver

2. Multi-Brand Cross Compatibility

Built on universal SFP MSA specification, this pluggable transceiver  works seamlessly with Cisco, Brocade, Huawei, Arista,Juniper, Ruijie, ZTE, H3C, D-Link and other vendors for multi‑vendor mixed‑network environments.

3. Free Value-Added Services

  • Custom firmware for multi-device compatibility
  • Free sample testing before bulk orders
  • Complete test reports for project acceptance
  • Strict batch consistency quality control
  • Free custom EEPROM programming for special and legacy network environments


Primary Application Scenarios

  • Enterprise Campus Uplinks: 10KM SMF pluggable transceiver for cross‑building Meraki‑based network links.
  • Switch‑to‑Switch Interconnect: Replace faulty pluggable transceiver to resolve Meraki packet loss and link flapping.
  • Hardware Maintenance: Direct drop‑in replacement for MA‑SFP‑1GB‑LX10 pluggable transceiver.
  • Network Upgrade Projects: Bulk buy pluggable transceiver to refresh aging Meraki network ports.

Connectivity Solutions(Applications) 

1.1GbE Switch-to-Switch Connectivity
HYTOPTODEVICE third-party pluggable transceiver for point to point factory network deployment

2.1GbE Switch to Media Converter ConnectivityHYTOPTODEVICE compatible pluggable transceiver for outdoor monitoring network

3.1GbE Structured Cabling Interconnect

HYTOPTODEVICE 1000BASE-LX  pluggable transceiver 1310NM 10KM SMF for enterprise backbone network

4.1GbE Switch-to-NIC Interconnection

HYTOPTODEVICE high-quality pluggable transceiver for bulk project procurement

The Core Feature

1. High-Efficiency & Low-Power 1G Data Center Interconnect

Minimizes power consumption while sustaining reliable full-duplex 1.25 Gbps performance across campus and data center environments.

HYTOPTODEVICE compatible pluggable transceiver module with low power consumption


2.
Host-Tested for Proven Interoperability

Every pluggable transceiver is pre-tested in target switches to ensure seamless plug-and-play operation and complete compatibility.Specific Compatibility Video available upon request.

HYTOPTODEVICE plug‑and‑play pluggable transceiver eliminates unsupported module alarms


3.100% Factory Tested for Reliability

Individually tested for optical compliance and signal integrity to guarantee stable, continuous operation in critical network environments.—take a virtual tour of our Test Center to see our Quality Assurance process in action.

HYTOPTODEVICE factory‑supply 1000base-lx pluggable transceiver with 100% test

 

FAQ

Q1: What are the advantages of 1000BASE-LX pluggable transceiver for Meraki networks?
A: This 1310nm single-mode pluggable transceiver features low signal attenuation. It stably supports long-distance interconnection, ideal for Meraki enterprise campus networking.


Q2: Why do third-party modules trigger errors on Meraki switches?

A: Meraki devices have strict vendor verification rules. Ordinary generic modules cannot pass system detection. Our pluggable transceiver comes with customized EEPROM, achieving plug-and-play and zero-alarm operation.

Q3: What is the stable transmission range of this Meraki pluggable transceiver?

A: Paired with standard G.652 single-mode fiber, this pluggable transceiver delivers error-free transmission up to 10KM. Exceeding the rated distance will cause unstable optical signals and intermittent link drops.

Q4: Can this Meraki LX pluggable transceiver work with multimode fiber?
A: Yes. It supports a maximum transmission distance of 550 meters. You need to use a mode conditioning patch cable to eliminate differential mode delay and ensure link stability.

Q5: Is it compatible to pair 10KM LX module with long-distance optical modules?

A: Yes, pairing is available. Just make sure the optical power received by the short-distance module will not be saturated by excessive optical power.

Q6: Is an optical attenuator required for short single-mode fiber links?

A: Generally not necessary. LX series pluggable transceiver has a high optical power saturation threshold. You can check real-time DDM data to confirm the received power is within the standard range.

Q7: What causes low optical power alarms on Meraki optical links?

A: Common reasons include dirty fiber end faces, aging fiber cables and excessive line attenuation. The DDM monitoring function of our pluggable transceiver can quickly locate such link faults.

Q8: Why choose LC UPC interface for Meraki gigabit transceiver?

A: LC UPC interface features low insertion loss and stable connection. It is fully compatible with mainstream fiber jumpers and Meraki device SFP ports for long-term stable networking.

Q9: What problems will reversed fiber TX/RX polarity cause?
A: Reversed transceiver and receiving fibers will block optical signal transmission. The port will fail to light up. Standard cross-wire connection is required for normal link activation.

Q10: What is the advantage of hot-swappable pluggable transceiver?
A: This hot-pluggable design supports online module replacement. It helps users complete equipment maintenance without network shutdown, greatly reducing business downtime.

Q11: Why choose high-reliability pluggable transceiver for large Meraki projects?
A: Large-scale network deployment requires low-failure hardware. Our pluggable transceiver passes strict high-temperature aging tests, with stable performance suitable for batch engineering deployment.

Q12: What procurement advantages do your Meraki-compatible modules have?

A: We provide factory direct sales and bulk purchase services. Our pluggable transceiver retains full compatibility and stable performance, effectively cutting enterprise network upgrade costs.

Q13: What working environment is suitable for commercial optical modules?

A: This commercial-grade pluggable transceiver adapts to 0℃-70℃ indoor room temperature environments. Harsh outdoor temperature and humidity will accelerate module aging and cause link failures.

Q14: Is the built-in laser of the pluggable transceiver safe?

A: All our pluggable transceiver lasers comply with international safety specifications. The 1310nm laser is safe for long-term enterprise network application with no hidden risks.

Q15: Does this gigabit pluggable transceiver support 100Mbps rate adaptation?

A: No. This is a fixed-rate 1000Mbps pluggable transceiver. It only runs at gigabit speed and cannot auto-negotiate or downgrade to 100Mbps network rate.

Q16: What supplier provides DDM validated optical transceivers?
A: HYTOPTODEVICE is a professional supplier of DDM-validated pluggable transceiver. All Meraki compatible modules undergo strict DDM calibration and testing to ensure accurate real-time optical data monitoring.

Packaging Options & Custom‑Packaging Solutions

Every transceiver module gets reliable ESD‑safe packaging out of the box. Standard packing is ready for immediate shipment, while custom‑printed packaging with your logo is available for bulk orders.


Why Network Engineers Choose HYTOPTODEVICE

HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
  • 100% MSA-compliant modules with Cisco, Huawei,Dell,Juniper, and Arista compatibility
  • ISO 9001:2015 certified manufacturing facility in Shenzhen
  • Average lead time of 3–5 business days with DHL/FedEx express options
  • Dedicated pre-sales engineering support for custom configurations
  • Actual hardware,actual switches,actual results.we publish compatibility test video,eliminate compatibility anxiety. you can watch before you buy. 
  • We can provide inspection and shipping videos to make you feel as if you are right here with the product.


"We replaced 200 Cisco-branded SFPs with HYTOPTODEVICE equivalents across our spine layer — zero compatibility issues, 40% cost reduction."— Network Architect, Tier-2 ISP, Germany



Quality Certification & Compliance

 At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final inspection, our processes ensure global compliance and reliability.

We adhere to rigorous standards for our SFP modules and network solutions:

  • ISO 9001: Certified quality management and production consistency.

  • CE & FCC: Fully compliant for seamless Global Market Access.

  • RoHS: Committed to environmental responsibility and hazardous material control.

  • Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.

Certified Quality. Global Standards. Guaranteed Performance.




Rigorous Industrial Product Testing

   

100% 3rd Party Compatible

Partial Test Demonstration

  • Cisco Meraki  MA-SFP-1GB-LX10 Compatible 1000BASE-LX  Pluggable Transceiver | SFP 1310nm 10KM SMF Bulk Wholesale | HYTOPTODEVICE
  • HYTOPTODEVICECisco Meraki  MA-SFP-1GB-LX10  pluggable transceiver  fix unrecognized alarm
  • hytoptodevice 1000BASE-LX 1310nm 10KM SMF pluggable transceiver for Cisco Meraki network devices
  • DDM supported gigabit Cisco Meraki  MA-SFP-1GB-LX10  compatible module solve link flapping
  • Bulk wholesale Cisco Meraki  MA-SFP-1GB-LX10  replacement pluggable transceiver HYTOPTODEVICE
  •  Bulk wholesale Cisco Meraki  MA-SFP-1GB-LX10  replacement pluggable transceiver  HYTOPTODEVICE

Download