HPE BladeSystem(H3C) SFP-XG-LX-SM1310 Compatible 10G SFP+ Module Wholesale | 10GBASE-LR 1310nm 10km SMF | HYTOPTODEVICE
Product Overview
Looking for reliable 10g sfp+ module wholesale for HPE BladeSystem and H3C long-reach single-mode fiber networking? HYTOPTODEVICE provides HPE BladeSystem(H3C) SFP-XG-LX-SM1310 matching 10GBASE-LR SFP+ transceivers complying with MSA and IEEE 802.3ae standards. This module adopts 1310nm DFB laser, supporting stable 10G transmission up to 10km over G.652D single-mode fiber. Built-in DDM function supports real-time monitoring of optical power and operating temperature. Pre-calibrated EEPROM profile matches H3C host identification rules to avoid transceiver unrecognized alerts. Every optic passes strict optical testing before shipment. Sample testing, custom EEPROM programming and private label service are available for distributors, system integrators and data center operators searching for stable 10g sfp+ module wholesale.
Key Technical Specifications
| H3C Compatible |
SFP-XG-LX-SM1310 |
Vendor Name |
HYTOPTODEVICE |
| Form Factor |
SFP+ |
Max Data Rate |
10.7Gbps |
| Wavelength |
1310nm |
Max Distance |
10km |
| Connector |
Duplex LC |
Transmitter Type |
1310nm DFB |
| Cable Type |
OS2 SMF |
Receiver Type |
PIN |
| TX Power |
-6.5~-0.5dBm |
Receiver Sensitivity |
< -14.4dBm |
| Power Consumption |
≤1W |
Receiver Overload |
0.5dBm |
| Protocols |
IEEE 802.3ae, SFF-8472, SFF-8431, SFF-8432, SFP+ MSA Compliant, CPRI, eCPRI |
Operation Temperature |
0 to 70°C (32 to 158°F) |
For detailed technical specifications, please refer to the Datasheet
Usage Guidelines & Best Practices
-
Fiber Compatibility: Designed exclusively for G.652 OS2 single-mode fiber. Multimode fibers (OM3/OM4) or incompatible connector polish types (e.g., APC if the module requires UPC) will cause high attenuation and reduce transmission range.
-
Maintenance & Polarity: Clean LC optical connectors regularly before insertion. Dust and debris on the end face can lead to signal loss and degrade SFP+ 10G LR performance.
-
Distance & Link Budget: Supports up to a 10 km transmission distance within the standard optical power budget. Excessive fiber splices, patch panels, or sharp bends will shorten the usable range.
-
Thermal Management: Operating power consumption is ≤ 1 W, requiring no additional heat sinks under standard commercial temperatures (0°C to 70°C).
-
Industrial Grade Option: For outdoor cabinet deployments requiring extreme temperatures, contact sales for our industrial-grade (-40°C to 85°C) SFP+ 10G LR modules.
For detailed operation instructions, please refer to the User Guide.
Full Compatibility List & Supported Network Hardware
1. Supported Hardware & Firmware
● H3C S5560 / S5590 Series Enterprise Aggregation Switches
● H3C S6520 / S6550 Series 10G Core Switches
● HPE BladeSystem c7000 / c3000 Series Blade Server Chassis
● H3C S6850 / S6860 Series Data Center Switches
2. Multi-Brand Cross Compatibility
This SFP-XG-LX-SM1310 compatible transceiver works plug-and-play on Fortinet, Ubiquiti, MikroTik and Extreme Networks platforms. For Cisco, Juniper, Arista, Huawei and Dell hardware, custom EEPROM re-flash service is available.
3. Free Value-Added Services
● Custom EEPROM coding for H3C Comware OS and multi-brand hardware recognition
● Sample testing before bulk supply orders for H3C & HPE BladeSystem networking projects
● Private label customization and H3C switch deployment guidance
● Rigorous batch consistency and optical performance inspection
● Free EEPROM rewrite service for legacy network firmware requirements
● 24/7 online technical support for 10GBASE-LR SFP optical modules
Primary Application Scenarios
● 10G long-reach fiber uplinks for H3C switches and HPE BladeSystem server chassis
● Inter-building single-mode fiber interconnections for enterprise campuses
● Core switch backbone long-distance aggregation links
● Metropolitan area network 10G fiber connection
● Bulk supply of 10GBASE-LR transceivers for global buyers sourcing 10g sfp+ module wholesale
Connectivity Solutions(Applications)
1. 10G to 10G for Switch-Switch Interconnection

2.10G for Switch-Media Converter

3.40G to 4x 10G for Switch-Switch

4.10G for Switch to NIC

5.10G Structured Cabling Deployment
The Core Feature
1.10G High-Density & Ultra-Low Power Connectivity
Featured with 1W low-power, high-density and high-speed, the SFP+ transceiver offers a popular SFP+ 10G LR solution to help operators quickly ramp up to 10G transmission. Dual usage for backbone trunk and breakout uplink cuts hardware investment during staged network expansion.

2.Verified Host Interoperability
Every batch of HYTOPTODEVICE SFP+ 10G LR completes real-machine verification on Comware and other mainstream switch operating systems. Pre-calibrated EEPROM eliminates unapproved transceiver alert pop-ups, ensuring consistent plug-and-play stability for mixed-brand wholesale clients.

3.Rigorous Testing, Uncompromising Reliability
All bulk SFP+ 10G LR batches pass 10km fiber simulation, high-low temperature cycling and 72-hour full-traffic burn-in screening. Precise four-lane power calibration mitigates signal fluctuation on lengthy fiber runs to guarantee 24/7 continuous backbone operation.

FAQ
Q1: Will HPE BladeSystem(H3C) SFP-XG-LX-SM1310 compatible optic trigger unsupported transceiver alert on S6520 switches?A: Generic third-party optics often pop warning messages on H3C Comware OS. HYTOPTODEVICE preloads matched EEPROM profile for H3C hardware, no extra CLI setup needed, ideal for clients sourcing 10g sfp+ module wholesale.
Q2: Will H3C Comware firmware upgrade lock generic SFP-XG-LX-SM1310 10GBASE-LR transceivers?A: Low-quality cloned modules may fail host recognition after firmware updates. Our SFP-XG-LX-SM1310 passes full real-machine compatibility tests with new firmware versions, stable stock for 10g sfp+ module wholesale buyers.
Q3: Can HPE BladeSystem(H3C) SFP-XG-LX-SM1310 compatible modules run on Fortinet, MikroTik, Cisco, Juniper and Arista devices?A: It works plug-and-play on Fortinet, Ubiquiti and MikroTik. Cisco, Juniper, Arista and Huawei have transceiver lock restrictions; custom EEPROM flashing service is offered for 10g sfp+ module wholesale bulk orders.
Q4: What separates the SFP-10G-LR hardware form factor from the 10GBASE-LR industry standard?
A: 10GBASE-LR refers to the IEEE standardized optical transmission specification. SFP-10G-LR is the physical SFP+ transceiver hardware that complies with this official 10G single-mode long-range standard.
Q5: Is direct cross-communication possible between LR and ER 10G fiber modules?
A: End-to-end links mixing LR and ER transceivers cannot maintain stable error-free traffic. Mismatched transmit power levels overload LR receiver chips and create massive bit error rates.
Q6: Can green LC/APC terminated fiber cords connect to standard 10G LR SFP ports?
A: APC angled fiber ends reflect excessive light back into the LR laser cavity, leading to signal instability and component damage. Only flat-cut LC/UPC single-mode cables are compatible with this transceiver model.
Q7: What safe operation method cleans the optical ferrule of a 10G LR SFP module?
A: Use alcohol-moistened lint-free fiber cleaning sticks to wipe the LC ferrule gently. Avoid compressed air sprays and regular tissue paper, as scratches on laser glass permanently degrade long-haul link performance.
Q8: What root causes trigger low received power alarms and intermittent signal drops on 10G LR links?
A: Dirty LC fiber tips, tightly bent patch cords, loose panel jacks or over-length fiber spans will drain the module’s optical loss budget. Built-in DOM monitoring on HYTOPTODEVICE optics quickly identifies insufficient power margins.
Q9: Why does the 10G LR transceiver feel abnormally hot during operation?
A: Excessive heat comes from blocked cabinet airflow, fully loaded switch slots without thermal headroom or faulty fiber connections that force the laser to operate at maximum power. Proper ventilation lowers running temperature effectively.
Q10: Can a single HYTOPTODEVICE 10G LR SFP operate normally on both Cisco and HP brand switching equipment?
A: It won’t work plug-and-play. Cisco and HP enforce EEPROM vendor signature locks; mismatched codes may disable ports. The reliable way: program Cisco-coded EEPROM for Cisco hardware and HP-coded EEPROM for HP hardware. You may also enable unsupported transceiver CLI commands as a temporary workaround. For stable production, use brand-tuned optics.
Packaging & Custom OEM Solutions
Our 10G SFP+ LR module comes sealed in standard anti-static (ESD-safe) packaging, pre-stocked and ready for immediate shipment. For bulk orders, we offer custom OEM packaging—including logo printing and private labeling—tailored for network distributors, system integrators, and enterprise deployments.

Why Network Engineers Choose HYTOPTODEVICE
HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
- Up to 70% cost savings vs OEM, transparent pricing & flexible bulk rates, supported quality returns
- 100% real-device compatible with Cisco, Huawei,Dell,Juniper, and Arista
- ISO 9001:2015 Shenzhen factory, full lineup: 1.25G/10G/25G/40G/100G/200G/400G/800G/1.6T transceivers
- Ample stock, fast global DHL/FedEx shipping in 3–5 working days
- Free pre-sales engineering support for custom EEPROM & private label firmware
- Real switch test videos available for pre-purchase review; inspection & shipping videos provided per order
“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia
Quality Certification & Compliance
At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.
We adhere to rigorous standards for our SFP modules and network solutions:
-
ISO 9001: Certified quality management and production consistency.
-
CE & FCC: Fully compliant for seamless Global Market Access.
-
RoHS: Committed to environmental responsibility and hazardous material control.
-
Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.
Certified Quality. Global Standards. Guaranteed Performance.

Rigorous Industrial Product Testing

100% 3rd Party Compatible

Partial Test Demonstration

Others


