EdgeCore ET5402‑LR Compatible SFP+ 10G LR Transceiver Module | 10GBASE‑LR 1310nm 10km SM LC DOM Bulk Wholesale
Product Overview
HYTOPTODEVICE SFP+ 10G LR transceiver serves as drop‑in replacement unit for EdgeCore ET5402‑LR, purposely tuned for stable operation on EdgeCore open‑compute white‑box switches.
This MSA‑compliant 10GBASE‑LR SFP+ optical component adopts mature 1310nm DFB laser design, delivering steady 10‑kilometer signal transmission across G.652 OS2 single‑mode fiber with duplex LC connectors. It meets IEEE 802.3ae, SFF‑8431 and SFF‑8472 industry specifications, equipped with complete DDM real‑time monitoring capability to help field engineers spot fiber‑layer faults rapidly.
Every HYTOPTODEVICE SFP+ 10G LR transceiver comes pre‑burned with EdgeCore‑targeted EEPROM configuration, preventing unrecognized transceiver notifications and unexpected port suspension. Its low power draw minimizes thermal burden inside high‑density white‑box racks. Well‑suited for open‑compute data center uplinks, campus inter‑building fiber links and high‑volume purchasing for solution providers and overseas distributors.
Key Technical Specifications
| EdgeCore Compatible |
ET5402‑LR |
Vendor Name |
HYTOPTODEVICE |
| Form Factor |
SFP+ |
Max Data Rate |
10.7Gbps |
| Wavelength |
1310nm |
Max Distance |
10km |
| Connector |
Duplex LC |
Transmitter Type |
1310nm DFB |
| Cable Type |
OS2 SMF |
Receiver Type |
PIN |
| TX Power |
-6.5~-0.5dBm |
Receiver Sensitivity |
< -14.4dBm |
| Power Consumption |
≤1W |
Receiver Overload |
0.5dBm |
| Protocols |
IEEE 802.3ae, SFF-8472, SFF-8431, SFF-8432, SFP+ MSA Compliant, CPRI, eCPRI |
Operation Temperature |
0 to 70°C (32 to 158°F) |
For detailed technical specifications, please refer to the Datasheet
Usage Guidelines & Best Practices
-
Fiber Compatibility: Designed exclusively for G.652 OS2 single-mode fiber. Multimode fibers (OM3/OM4) or incompatible connector polish types (e.g., APC if the module requires UPC) will cause high attenuation and reduce transmission range.
-
Maintenance & Polarity: Clean LC optical connectors regularly before insertion. Dust and debris on the end face can lead to signal loss and degrade SFP+ 10G LR performance.
-
Distance & Link Budget: Supports up to a 10 km transmission distance within the standard optical power budget. Excessive fiber splices, patch panels, or sharp bends will shorten the usable range.
-
Thermal Management: Operating power consumption is ≤ 1 W, requiring no additional heat sinks under standard commercial temperatures (0°C to 70°C).
-
Industrial Grade Option: For outdoor cabinet deployments requiring extreme temperatures, contact sales for our industrial-grade (-40°C to 85°C) SFP+ 10G LR modules.
For detailed operation instructions, please refer to the User Guide.
Full Compatibility List & Supported Network Hardware
1. Supported Hardware & Firmware
HYTOPTODEVICE SFP+ 10G LR transceiver matches mechanical outline and optical performance indexes of original EdgeCore ET5402‑LR. Custom‑tailored EEPROM eliminates third‑party transceiver system logs. Each production batch undergoes physical insertion and traffic testing on genuine EdgeCore hardware to avoid signal skew and unstable long‑distance fiber performance.
Validated EdgeCore Platforms:
• EdgeCore AS4610‑54P / AS5812‑54T Open Ethernet Switches
• EdgeCore AS7316‑54X High‑density data center switches
• EdgeCore AS9716 series chassis‑based open switches
• EdgeCore white‑box rack‑mount enterprise switching appliances
• Open‑compute servers fitted with SFP+ capable network interface cards
2. Multi-Brand Cross Compatibility
Built upon universal SFP+ MSA standard, HYTOPTODEVICE SFP+ 10G LR transceiver maintains stable performance across EdgeCore, Cisco, Arista, Juniper, Dell, Huawei and other mainstream network hardware. Ideal for multi‑vendor mixed‑fabric open‑compute environments, inter‑building fiber runs and legacy structured cabling renovation projects.
3. Free Value-Added Services
HYTOPTODEVICE offers competitive bulk pricing for resellers, system integrators and data center contractors. We provide free special compatible EEPROM reprogramming for all bulk orders.
Available options include private label printing, custom packaging and deployment consulting. All modules pass optical calibration, temperature cycling and 72-hour full-traffic burn-in. Large-volume orders enjoy tiered discounts to reduce project CAPEX.
Primary Application Scenarios
• 10‑km inter‑building single‑mode fiber backbones for EdgeCore open‑compute data centers
• Phased network refresh migrating legacy infrastructure toward 10‑gigabit speeds
• Long‑reach 10G uplink connections for aggregation and top‑of‑rack white‑box switches
• 40G‑to‑4×10G breakout mixed‑speed fabric construction
• Bulk supply for global optical component distributors and system integration contractors
• Multi‑vendor hybrid data‑center rack‑to‑rack long‑distance fiber interconnections
Connectivity Solutions(Applications)
1. 10G to 10G for Switch-Switch Interconnection

2.10G for Switch-Media Converter

3.40G to 4x 10G for Switch-Switch

4.10G for Switch to NIC

5.10G Structured Cabling Deployment
The Core Feature
1.10G High-Density & Ultra-Low Power Connectivity
Low‑power, high‑density SFP+ 10G LR module delivers cost‑effective 10G upgrade paths for EdgeCore‑based networks. Multiple connection topologies support phased expansion without full hardware replacement.

2.Verified Host Interoperability
Each production batch of HYTOPTODEVICE SFP+ 10G LR transceiver gets physical testing against EdgeCore open‑switch firmware and other mainstream network operating systems. Pre‑tuned EEPROM register data suppresses unauthorized‑transceiver warning logs, delivering consistent plug‑and‑play reliability for bulk‑order clients.

3.Rigorous Testing, Uncompromising Reliability
All units complete 10km fiber simulation, temperature cycling and 72-hour continuous traffic burn-in. Precision optical calibration minimizes signal fluctuation on long fiber runs. Built-in DOM enables remote fault detection for 24/7 backbone operation.

FAQ
Q1: Can I fit an SFP‑10G‑LR module into a 25G‑capable SFP28 switch port and expect normal operation?
A: Many SFP28 hardware ports support backward compatibility for 10G‑rate SFP+ modules and will drop operating speed down to 10Gbps. Some EdgeCore firmware builds demand manual port‑speed configuration to avoid unstable link negotiation.
Q2: What triggers the “unsupported transceiver” alert shown on EdgeCore network devices?
A: This warning occurs when switch firmware reads mismatched vendor identification values stored inside the module’s EEPROM memory. Our HYTOPTODEVICE units ship pre‑programmed with EdgeCore identification data to bypass this validation check. Out‑of‑date switch firmware can also trigger this warning message.
Q3: Is real‑time DDM diagnostic monitoring accessible with this SFP+ 10G LR transceiver?
A: Yes, our HYTOPTODEVICE SFP+ 10G LR transceiver supports full DDM digital monitoring feature. Network administrators can pull live metrics including transmit power, receive power, laser bias current, module temperature and supply voltage directly from EdgeCore switch command interfaces.
Q4: What is the typical power draw figure for this SFP+ 10G LR optical unit?
A: Our commercial SFP+ 10G LR transceiver consumes less than 1 W under regular working conditions. Low power consumption helps lower overall rack thermal load during large‑scale mass installation across open‑compute racks.
Q5: What temperature range can this SFP+ 10G LR transceiver withstand for continuous operation?
A: Standard commercial grade units run reliably within 0°C to +70°C for indoor data‑center use. We also supply industrial‑spec models rated ‑40°C up to +85°C suited for outdoor cabinets and harsh‑condition deployment sites.
Q6: Transmit power readings appear healthy on both ends, yet link status LED stays off, what may be causing this issue?
A: This symptom almost always points toward receive‑side signal failure. Dirty fiber end faces, damaged fiber cables, improper fiber type selection or excessive accumulated loss can block incoming light even if laser transmitters work fine. Checking DDM receive‑power values helps speed up troubleshooting work.
Q7: Where lies the practical gap between genuine OEM optics and third‑party replacement SFP+ 10G LR transceivers?
A: OEM optics are branded modules sold by network hardware manufacturers at premium pricing. Our HYTOPTODEVICE third‑party alternatives comply with identical MSA specifications, come pre‑programmed vendor EEPROM, undergo full‑suite lab testing, and deliver substantial cost savings without sacrificing link performance for open‑compute network builds.
Q8: Is SFP+ 10G LR transceiver suitable for connecting two separate buildings with 500‑meter fiber run?
A: Absolutely. The 10GBASE‑LR specification is designed for up to 10 km over OS2 single‑mode fiber. A 500‑meter inter‑building link sits well within its loss budget, provided you deploy qualified single‑mode fiber and well‑maintained LC patch cords.
Q9: Can passive optical splitters be deployed to copy traffic from point‑to‑point SFP+ 10G LR fiber links?
A: SFP+ 10G LR transceiver is engineered exclusively for bidirectional point‑to‑point Ethernet connections. Passive splitters introduce massive optical signal attenuation and cannot be used for signal splitting on this link type. PON‑purpose‑built transceivers are required for splitter‑based network topologies.
Q10: Do infrared laser outputs from SFP+ 10G LR transceiver create eye‑hazard risks for on‑site technicians?
A: SFP+ 10G LR falls under Class 1 laser safety rating during normal closed‑cable operation. Never gaze directly into open module ports or unterminated fiber ends. Invisible infrared radiation may inflict cumulative eye injury even when no visible light can be observed.
Packaging & Custom OEM Solutions
Our 10G SFP+ LR module comes sealed in standard anti-static (ESD-safe) packaging, pre-stocked and ready for immediate shipment. For bulk orders, we offer custom OEM packaging—including logo printing and private labeling—tailored for network distributors, system integrators, and enterprise deployments.

Why Network Engineers Choose HYTOPTODEVICE
HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
- Up to 70% cost savings vs OEM, transparent pricing & flexible bulk rates, supported quality returns
- 100% real-device compatible with Cisco, Huawei,Dell,Juniper, and Arista
- ISO 9001:2015 Shenzhen factory, full lineup: 1.25G/10G/25G/40G/100G/200G/400G/800G/1.6T transceivers
- Ample stock, fast global DHL/FedEx shipping in 3–5 working days
- Free pre-sales engineering support for custom EEPROM & private label firmware
- Real switch test videos available for pre-purchase review; inspection & shipping videos provided per order
“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia
Quality Certification & Compliance
At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.
We adhere to rigorous standards for our SFP modules and network solutions:
-
ISO 9001: Certified quality management and production consistency.
-
CE & FCC: Fully compliant for seamless Global Market Access.
-
RoHS: Committed to environmental responsibility and hazardous material control.
-
Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.
Certified Quality. Global Standards. Guaranteed Performance.

Rigorous Industrial Product Testing

100% 3rd Party Compatible

Partial Test Demonstration

Others


