• Alcatel-Lucent SFP-10G-SR Compatible SFP+ 10G SR Module | 850nm 300m MMF Bulk Factory Wholesale | HYTOPTODEVICE
  • Alcatel-Lucent SFP-10G-SR Compatible SFP+ 10G SR Module
  • Alcatel-Lucent SFP-10G-SR Compatible SFP+ 10G SR transceiver Module from hytoptodevice
  • Alcatel-Lucent SFP+ 10G SR Module  from hytoptodevice
  • Alcatel-Lucent SFP-10G-SR Compatible 10G SR Module
  • Alcatel-Lucent SFP-10G-SR Compatible SFP+ 10G SR Module | 850nm 300m MMF Bulk Factory Wholesale | HYTOPTODEVICE
  • Alcatel-Lucent SFP-10G-SR Compatible SFP+ 10G SR Module
  • Alcatel-Lucent SFP-10G-SR Compatible SFP+ 10G SR transceiver Module from hytoptodevice
  • Alcatel-Lucent SFP+ 10G SR Module  from hytoptodevice
  • Alcatel-Lucent SFP-10G-SR Compatible 10G SR Module

Alcatel-Lucent SFP-10G-SR Compatible SFP+ 10G SR Module | 850nm 300m MMF Bulk Factory Wholesale | HYTOPTODEVICE

HYTOPTODEVICE Alcatel‑Lucent SFP‑10G‑SR compatible SFP+ 10G SR module, 850nm VCSEL‑PIN, 300m OM3 /400m OM4 MMF, 0‑70℃ commercial grade, DDM supported, zero‑alarm for Alcatel‑Lucent OmniSwitch AOS switches. Factory in stock, bulk factory wholesale, sample available for enterprise campus network upgrade, solve unsupported transceiver alarm issues.
NO. Brand  Compatible P/N Transceiver Type
1 Alcatel-Lucent  SFP-10G-SR  SFP-10G-SR(Cisco)
2 Cisco Meraki  MA-SFP-10GB-SR  SFP-10G-LR
3 D-Link  DEM-431XT  SFP-10G-LRM
4 Dell  GP-10GSFP-1S  SFP-10G-ER
5 Juniper  SRX-SFP-10GE-SR SFP-10G-ZR
6 H3C SFP-XG-SX-MM850-A
7 IBM  46C3447
8 EdgeCore  ET5402-SR




Description

Alcatel‑Lucent SFP‑10G‑SR Compatible SFP+ 10G SR Module | 850nm 300m MMF Bulk Factory Wholesale | HYTOPTODEVICE

Product Overview

This SFP+ 10G SR module is drop‑in replacement for Alcatel‑Lucent SFP‑10G‑SR commercial‑grade optic, compatible with Alcatel‑Lucent OmniSwitch AOS‑based enterprise and campus switch platforms.
850 nm VCSEL‑PIN solution runs at 10.3125Gbps 10GBASE‑SR; reaches 300 m over OM3 MMF, 400 m over OM4 MMF, commercial operating temperature 0 ℃ ~ +70 ℃.
Compliant with IEEE 802.3ae, SFP+ MSA, SFF‑8472. Supports DDM/DOM monitoring. Pre‑loaded Alcatel‑Lucent‑specific EEPROM delivers zero‑alarm hot‑plug to solve common "unsupported‑transceiver" alarm pain‑point. Fits leaf‑spine connections, campus access‑aggregation trunks and 40G‑to‑10G breakout migration. Factory in stock for sample validation, bulk factory wholesale and large‑volume enterprise‑campus RFQ procurement.

Key Technical Specifications 

Alcatel-Lucent Compatible

SFP-10G-SR

Vendor Name

HYTOPTODEVICE

Form Factor SFP+ Max Data Rate 10.7Gbps
Wavelength 850nm Max Distance 300m on OM3 
Connector Duplex LC Transmitter Type VCSEL 850nm
Cable Type MMF Receiver Type PIN
TX Power -6.5~-0.5dBm Receiver Sensitivity < -10.5dBm
Power Consumption ≤1W Operation Temperature 0 to 70°C (32 to 158°F)

For detailed technical specifications, please refer to the Datasheet


Usage Guidelines & Best Practices

  • Fiber Choice: Duplex LC Multimode Fiber (MMF) — OM3 / OM4 (50/125 µm). Do NOT use SMF.

  • Connector Match: UPC/PC polish only. Do NOT use APC.

  • Cleanliness & Dust: Keep dust caps on whenever unattached. Clean fiber end-faces with a optical cleaning pen before insertion; dust causes over 80% of optical link failures.

  • Link Setup:Set speed to 10Gbps Full Duplex. Lock speed manually if auto-negotiation fails.

  • Handling: Wear ESD protection. Keep fiber bend radius ≥ 30 mm.

  • Installation & Hot-Swap Rules: MSA hot-swappable. Insert/remove gently without powering down.

  • Environment: Commercial temperature (0°C to 70°C). Avoid extreme heat, moisture, and dust.

For detailed operation instructions, please refer to the User Guide.


Full Compatibility List and Supported Devices 

1. Supported Hardware & Firmware

Pre‑programmed Alcatel‑Lucent EEPROM, native plug‑and‑play, real‑machine validated on OmniSwitch to eliminate unrecognition & link flapping.
Validated Alcatel‑Lucent OmniSwitch Platforms:
• OmniSwitch 6860 / 6860E Series Enterprise Switches
• OmniSwitch 6900 Series High‑performance Data‑center Switches
• OmniSwitch 9900 Modular Core Switch Families
• OmniSwitch 10K High‑density Chassis Switches
• All Alcatel‑Lucent networking hardware supporting SFP+ SFP‑10G‑SR port profiles running AOS firmware

2. Multi-Brand Cross Compatibility

MSA‑standard, interoperates with Cisco, Arista, HPE, Juniper, Huawei, Mellanox. Solves multi‑vendor mixed‑fabric deployment for bulk wholesale & large purchase.

3. Free Value-Added Services

  • Custom firmware for multi-device compatibility
  • Support sample testing before bulk orders
  • Complete test reports for project acceptance
  • Strict batch consistency quality control
  • Free custom EEPROM programming for special and legacy network environments
  • Free EEPROM Compatibility Re-flashing (Tools Included) with 24/7 Tech Support


Main Application Scenarios

  • Short‑reach leaf‑spine links for OmniSwitch enterprise campus
  • 10G access‑aggregation trunk expansion, bulk project deployment
  • 10G ToR uplinks for virtualization & server clusters
  • Intra‑building campus 10G MMF transmission
  • 40G→10G migration via QSFP+ 4×10G breakout, wholesale refresh
  • Multi‑vendor hybrid enterprise infrastructure, large‑volume purchase

Connectivity Solutions(Applications) 

1.10GbE Switch-to-Switch Connectivity
HYTOPTODEVICE 10G‑to‑10G switch‑switch inter‑connection 300m SFP‑10G‑SR module for  trunk links bulk project deployment

2.10GbE Switch to Media Converter Connectivityhytoptodevice compatible sfp+ 10g sr module for 10g ethernet,data center

3.10GbE Structured Cabling Interconnect

hytoptodevice 10GBASE‑SR 850nm MMF,SFF‑8472 DDM optical transceiver module

4.10GbE Switch-to-NIC Interconnection

HYTOPTODEVICE 10G‑to‑10G switch‑NIC high‑speed uplink module for server cluster rugged cabinet connections

5.10G Switch-to-4x10G Switch Interconnection
HYTOPTODEVICE 10G‑to‑40G migration SFP‑10G‑SR module for data‑center upgrade wholesale procurement

The Core Feature

1. Next-Gen 10G DCI: Ultra-Low Power, Maximum Density

 Cut operational costs while scaling your network. Delivering high-density 10G connectivity at just 1W per port, this solution enables seamless, highly efficient data center upgrades.

hytoptodevice SFP‑10G‑SR compatible optical transceiver with low power consumption, high-density


2.
100% Host-Tested: Plug-and-Play Guaranteed

Thoroughly pre-tested on target switches for seamless hardware integration. Compatibility Video available upon request.


hytoptodevice compatible SFP+ 10g sr module MMF 850NM 300m

3. 100% Individually Tested for Peak Performance

Guaranteed optical compliance and continuous operational stability. Take a virtual tour of our Test Center  to see how we verify every unit.

HYTOPTODEVICE compatible 10G SFP+ SR MODULE WITH 850nm MMF 300M WITH  100% test


4.Seamless 10G to 40G Upgrade

Upgrade individual sites to 40G while keeping seamless connectivity with existing 10G infrastructure.

hytoptodevice SFP‑10G‑SR compatible transceiver for 10g to 40G upgrade


FAQ 

Q1: Will this SFP‑10G‑SR module work with my specific switch brand (e.g., Cisco, Arista, Juniper, Dell)? A: This SFP+ 10G SR module follows universal SFP+ MSA specification and works across mainstream switch hardware. For Alcatel‑Lucent OmniSwitch platforms, custom‑programmed EEPROM ensures zero‑alarm operation. For Cisco, Arista, Juniper or Dell devices, confirm switch firmware allows third‑party optics; some vendors enforce optical‑lock restrictions. Submit your exact switch model for pre‑sales verification before bulk SFP+ 10G SR module procurement.

Q2: Will third‑party or generic SFP‑10G‑SR modules void my equipment warranty? A: In most regions, using qualified third‑party SFP‑10G‑SR optics will not automatically void hardware warranty. Certain network vendors may limit warranty coverage if hardware damage can be traced directly to faulty third‑party transceivers. Our HYTOPTODEVICE modules undergo full‑stress factory testing to reduce failure risk; keep module test records for enterprise audit when purchasing bulk SFP‑10G‑SR replacement optics.

Q3: Will this module work in Network Interface Cards (NICs) like Intel or Broadcom? A: Yes. This Alcatel‑Lucent compatible SFP‑10G‑SR adheres to SFP+ MSA mechanical and electrical standards, compatible with most Intel X520/X710 and Broadcom NetXtreme SFP+ NIC adapters. Note that some server NIC firmware locks against non‑original branded optics; select our generic‑profile variant and validate NIC firmware version ahead of large‑scale server‑NIC SFP‑10G‑SR deployment.

Q4: How far can SFP‑10G‑SR reach using legacy OM1 or OM2 fiber? A: Transmission performance drops sharply on older multimode cable. OM1 fiber delivers roughly 33 m reach, OM2 reaches approximately 82 m under 10GBASE‑SR standard. These distances are insufficient for most enterprise‑campus links. For full‑rated 300‑400 m performance, deploy OM3 or OM4 multimode fiber when ordering wholesale SFP‑10G‑SR optical modules.

Q5: What optical connector interface does the SFP‑10G‑SR use? A: The Alcatel‑Lucent compatible SFP‑10G‑SR adopts duplex LC‑UPC connector interface. LC‑UPC is widely deployed within enterprise‑campus and data‑center multimode‑fiber infrastructures. Avoid APC‑angled‑end‑face patch cords; APC connectors introduce extra return‑loss and trigger higher bit‑error rates when paired with UPC‑calibrated SFP‑10G‑SR transceiver hardware.

Q6: Can I break out a 40G QSFP+ SR4 port to four 10G SFP‑10G‑SR modules? A: Yes, this breakout application is supported with correct hardware and configuration. Deploy a passive 40G‑to‑4×10G SR4 breakout cable; each individual lane connects to one SFP‑10G‑SR multimode transceiver. Remember to enable QSFP+ breakout mode inside your switch CLI. Misconfigured port modes result in total link loss during mixed‑speed fabric builds using SFP‑10G‑SR breakout connections.

Q7: What latency should I expect from an SFP‑10G‑SR connection? A: Transceiver‑induced latency remains very low. Typical per‑module optical latency sits around 10‑30 nanoseconds. End‑to‑end link latency is mainly determined by switch ASIC processing plus fiber propagation delay. SFP‑10G‑SR multimode optics add minimal overhead, making them suitable for low‑latency enterprise‑campus and virtualization workloads. Conduct real‑environment latency testing for ultra‑low‑latency production‑grade SFP‑10G‑SR links.

Q8: How does heat output compare between SFP‑10G‑SR and 10G copper RJ45 optics? A: SFP‑10G‑SR multimode optical modules produce far less thermal load. Max power consumption ≤1.0W per unit, while 10GBASE‑T copper SFP+ modules consume 2.5‑4W each. Mass deployment of copper transceivers raises cabinet PUE and increases cooling pressure. For high‑density 48‑port enterprise racks, choose SFP‑10G‑SR to ease thermal management during large‑volume optical‑module roll‑out.

Q9: Does SFP‑10G‑SR support FEC (Forward Error Correction)? A: No, hardware‑embedded FEC is not implemented on the SFP‑10G‑SR transceiver. The IEEE 10GBASE‑SR standard does not define on‑module forward‑error‑correction functions. If error correction is required for your network fabric, enable FEC on your switch ASIC level. Maintain link‑loss within optical‑budget range to keep BER ≤1×10⁻¹²; never rely on missing transceiver‑FEC to compensate excessive fiber attenuation for SFP‑10G‑SR links.

Q10: Does SFP‑10G‑SR support hot‑swapping? A: Yes. Compliant with SFP+ MSA hot‑plug specification. You can insert or remove SFP‑10G‑SR modules without power‑cycling connected OmniSwitch or server‑NIC hardware. During enterprise‑production‑hours, avoid frequent hot‑swap operations amid heavy‑traffic bursts; brief link interruption occurs at module replacement. Schedule maintenance windows for mass SFP‑10G‑SR hot‑swap activities.

Q11: What is the average lifespan (MTBF) of an SFP‑10G‑SR module? A: HYTOPTODEVICE Alcatel‑Lucent compatible SFP‑10G‑SR delivers calculated MTBF over 1,000,000 hours under recommended commercial‑grade operating conditions (0‑70℃, clean cabinet environment). Real‑world service life is affected by cabinet temperature, dust pollution, vibration and frequent hot‑swap cycles. For long‑term enterprise‑campus deployments, keep proper rack ventilation to maximize SFP‑10G‑SR service lifetime.

Q12: Does the transceiver comply with MSA (Multi‑Source Agreement) standards? A: Yes. Our SFP‑10G‑SR fully complies with SFP+ MSA hardware specification together with SFF‑8472 DDM monitoring standard. MSA compliance guarantees mechanical dimension, electrical signal and DOM‑monitoring compatibility with MSA‑compliant host‑equipment. Even with customized Alcatel‑Lucent‑specific EEPROM profile, underlying hardware still follows official SFP+ MSA requirements for third‑party SFP‑10G‑SR replacements.

Q13: How do dust and dirt affect SFP‑10G‑SR performance? A: Dust and contamination on LC‑UPC end‑faces are top causes of unstable SFP‑10G‑SR links. Dirty connector surfaces trigger increased insertion‑loss, random packet loss and intermittent link‑flapping even if basic link‑up status shows okay. Always clean patch‑cord and module LC ports before installation. Include optical‑connector cleaning as regular maintenance step for long‑running SFP‑10G‑SR enterprise‑campus networks.

Q14: Are all generic SFP‑10G‑SR optics built with the same internal components? A: No. Generic‑label SFP‑10G‑SR transceivers vary greatly on laser‑diode, receiver‑PIN chip and component screening standards. Low‑cost alternatives may adopt un‑screened chips, bringing higher bit‑error risk and shortened service life. HYTOPTODEVICE SFP‑10G‑SR uses qualified grade‑A VCSEL‑PIN components and passes multi‑step aging‑testing, ideal for reliable bulk‑order third‑party SFP‑10G‑SR procurement.

Q15: Is it safe to look directly into the optical port of an active SFP‑10G‑SR? A: No. SFP‑10G‑SR belongs to Class 1 laser product; avoid direct eye exposure toward active optical ports. Even though 850 nm VCSEL laser is invisible to human eyes, long‑time direct viewing may cause eye injury. Never stare into module or patch‑cord fiber ends while SFP‑10G‑SR transceiver is powered‑on inside live enterprise‑network hardware.


Packaging & Custom OEM Solutions

Every 10G SFP+ module comes individually sealed in standard anti-static (ESD-safe) packaging, pre-stocked and ready for immediate shipment. For bulk orders, we offer custom OEM packaging—including logo printing and private labeling—tailored for network distributors, system integrators, and enterprise deployments.

HYTOPTODEVICE sfp-10g-sr optical transceiver module custom package


Why Network Engineers Choose HYTOPTODEVICE

HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.

  • 100% MSA-compliant modules with Cisco, Huawei,Dell,Juniper, and Arista compatibility
  • ISO 9001:2015 certified manufacturing facility in Shenzhen
  • Average lead time of 3–5 business days with DHL/FedEx express options
  • Dedicated pre-sales engineering support for custom configurations
  • Actual hardware,actual switches,actual results.we publish compatibility test video,eliminate compatibility anxiety. you can watch before you buy. 
  • We can provide inspection and shipping videos to make you feel as if you are right here with the product.

“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP+ modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia

Quality Certification & Compliance

 At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.

We adhere to rigorous standards for our SFP modules and network solutions:

  • ISO 9001: Certified quality management and production consistency.

  • CE & FCC: Fully compliant for seamless Global Market Access.

  • RoHS: Committed to environmental responsibility and hazardous material control.

  • Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.

Certified Quality. Global Standards. Guaranteed Performance.




Rigorous Industrial Product Testing

   

100% 3rd Party Compatible

Partial Test Demonstration

  • Alcatel-Lucent SFP-10G-SR Compatible SFP+ 10G SR Module | 850nm 300m MMF Bulk Factory Wholesale | HYTOPTODEVICE
  • Alcatel-Lucent SFP-10G-SR Compatible SFP+ 10G SR Module
  • Alcatel-Lucent SFP-10G-SR Compatible SFP+ 10G SR transceiver Module from hytoptodevice
  • Alcatel-Lucent SFP+ 10G SR Module  from hytoptodevice
  • Alcatel-Lucent SFP-10G-SR Compatible 10G SR Module

Download