• IBM 46C3447 Compatible 10G SR SFP Transceiver  | 850nm 300m MMF Bulk & Wholesale | HYTOPTODEVICE
  • IBM  Compatible 10G SR  SFP Transceiver
  • 10GBASE‑SR 850nm MMF,DDM 10G SR SFP transceiver,
  • unlock ibm switch third‑party transceiver 10G 850nm 300m from hytoptodevice
  • factory wholesale 10g sr sfp transceiver,enterprise campus network upgrade
  • IBM 46C3447 Compatible 10G SR SFP Transceiver  | 850nm 300m MMF Bulk & Wholesale | HYTOPTODEVICE
  • IBM  Compatible 10G SR  SFP Transceiver
  • 10GBASE‑SR 850nm MMF,DDM 10G SR SFP transceiver,
  • unlock ibm switch third‑party transceiver 10G 850nm 300m from hytoptodevice
  • factory wholesale 10g sr sfp transceiver,enterprise campus network upgrade

IBM 46C3447 Compatible 10G SR SFP Transceiver | 850nm 300m MMF Bulk & Wholesale | HYTOPTODEVICE

Buy HYTOPTODEVICE IBM 46C3447 compatible 10g sr sfp transceiver, 850nm 10GBASE‑SR, 300m OM3/400m OM4 MMF, DDM supported, plug‑and‑play for IBM BladeCenter and RackSwitch series. Factory wholesale, bulk purchase and sample order available, fast global delivery. 
NO. Brand  Compatible P/N Transceiver Type
1 Alcatel-Lucent  SFP-10G-SR  SFP-10G-SR(Cisco)
2 Cisco Meraki  MA-SFP-10GB-SR  SFP-10G-LR
3 D-Link  DEM-431XT  SFP-10G-LRM
4 Dell  GP-10GSFP-1S  SFP-10G-ER
5 Juniper  SRX-SFP-10GE-SR SFP-10G-ZR
6 H3C SFP-XG-SX-MM850-A
7 IBM  46C3447
8 EdgeCore  ET5402-SR



Description

IBM 46C3447 Compatible 10G SR SFP Transceiver Module | 850nm 300m MMF Bulk Factory Wholesale | HYTOPTODEVICE

Product Overview

HYTOPTODEVICE IBM 46C3447 compatible 10g sr sfp is a plug-and-play drop-in replacement optic for IBM and Lenovo data center hardware. Pre-programmed IBM EEPROM eliminates third-party transceiver alarms and link flapping.
This 850nm 10GBASE-SR multimode module delivers 10.3125Gbps speed, supporting 300m transmission on OM3 fiber and 400m on OM4 fiber. Built-in DDM monitoring and hot-swap support ensure stable 24/7 operation. Ideal for IBM BladeCenter interconnection, switch uplinks and server cluster networking. Buy and procure bulk 10g sr sfp directly from the factory to cut enterprise network upgrade CAPEX.

Key Technical Specifications 

IBM Compatible

 46C3447 

Vendor Name

HYTOPTODEVICE

Form Factor SFP+ Max Data Rate 10.7Gbps
Wavelength 850nm Max Distance 300m on OM3 
Connector Duplex LC Transmitter Type VCSEL 850nm
Cable Type MMF Receiver Type PIN
TX Power -6.5~-0.5dBm Receiver Sensitivity < -10.5dBm
Power Consumption ≤1W Operation Temperature 0 to 70°C (32 to 158°F)

For detailed technical specifications, please refer to the Datasheet


Usage Guidelines & Best Practices

  • Fiber Choice: Duplex LC Multimode Fiber (MMF) — OM3 / OM4 (50/125 µm). Do NOT use SMF.

  • Connector Match: UPC/PC polish only. Do NOT use APC.

  • Cleanliness & Dust: Keep dust caps on whenever unattached. Clean fiber end-faces with a optical cleaning pen before insertion; dust causes over 80% of optical link failures.

  • Link Setup:Set speed to 10Gbps Full Duplex. Lock speed manually if auto-negotiation fails.

  • Handling: Wear ESD protection. Keep fiber bend radius ≥ 30 mm.

  • Installation & Hot-Swap Rules: MSA hot-swappable. Insert/remove gently without powering down.

  • Environment: Commercial temperature (0°C to 70°C). Avoid extreme heat, moisture, and dust.

For detailed operation instructions, please refer to the User Guide.


Full Compatibility List and Supported Devices 

1. Supported Hardware & Firmware

Lab-tested and pre-flashed with official IBM EEPROM, this 10g sr sfp avoids unrecognized transceiver errors, port shutdown and link instability, fully matching the performance of original IBM 46C3447 modules. Compatible with mainstream IBM & Lenovo data center platforms:
● IBM BladeCenter T/HT/H/E chassis switching modules
● IBM/Lenovo RackSwitch G8000, G7052, G8264CS, NE2572O series
● IBM Flex System CN4093, SI4091 fabric switches
● IBM legacy 4003-B04R/4002CY2/3758-L32 Ethernet switches
● Lenovo System x servers and DX8200C storage devices
Note: Please keep switch firmware up‑to‑date to achieve best compatibility result.

2. Multi-Brand Cross Compatibility

MSA‑standard, interoperates with Cisco, Arista, HPE, Juniper, Huawei, Mellanox. Solves multi‑vendor mixed‑fabric deployment for bulk wholesale & large purchase.

3. Free Value-Added Services

  • Custom firmware for multi-device compatibility
  • Support sample testing before bulk orders
  • Complete test reports for project acceptance
  • Strict batch consistency quality control
  • Free custom EEPROM programming for special and legacy network environments
  • Free EEPROM Compatibility Re-flashing (Tools Included) with 24/7 Tech Support


Main Application Scenarios

● IBM BladeCenter chassis internal high-speed interconnection
● Data center ToR switch 10G uplink and server cluster networking
● Enterprise campus network 10G trunk bandwidth expansion and batch upgrade
● Short-distance multimode fiber transmission in IBM server room infrastructure
● Legacy IBM network 40G-to-10G breakout migration and hardware renewal
● Large-scale enterprise cost-effective replacement procurement of IBM 46C3447 modules

Connectivity Solutions(Applications) 

1.10GbE Switch-to-Switch Connectivity
HYTOPTODEVICE 10G‑to‑10G switch‑switch inter‑connection 300m SFP‑10G‑SR module for  trunk links bulk project deployment

2.10GbE Switch to Media Converter Connectivityhytoptodevice compatible sfp+ 10g sr module for 10g ethernet,data center

3.10GbE Structured Cabling Interconnect

hytoptodevice 10GBASE‑SR 850nm MMF,SFF‑8472 DDM optical transceiver module

4.10GbE Switch-to-NIC Interconnection

HYTOPTODEVICE 10G‑to‑10G switch‑NIC high‑speed uplink module for server cluster rugged cabinet connections

5.10G Switch-to-4x10G Switch Interconnection
HYTOPTODEVICE 10G‑to‑40G migration SFP‑10G‑SR module for data‑center upgrade wholesale procurement

The Core Feature

1. Next-Gen 10G DCI: Ultra-Low Power, Maximum Density

 Cut operational costs while scaling your network. Delivering high-density 10G connectivity at just 1W per port, this solution enables seamless, highly efficient data center upgrades.

hytoptodevice SFP‑10G‑SR compatible optical transceiver with low power consumption, high-density


2.
100% Host-Tested: Plug-and-Play Guaranteed

Thoroughly pre-tested on target switches for seamless hardware integration. Compatibility Video available upon request.


hytoptodevice compatible SFP+ 10g sr module MMF 850NM 300m

3. 100% Individually Tested for Peak Performance

Guaranteed optical compliance and continuous operational stability. Take a virtual tour of our Test Center  to see how we verify every unit.

HYTOPTODEVICE compatible 10G SFP+ SR MODULE WITH 850nm MMF 300M WITH  100% test


4.Seamless 10G to 40G Upgrade

Upgrade individual sites to 40G while keeping seamless connectivity with existing 10G infrastructure.

hytoptodevice SFP‑10G‑SR compatible transceiver for 10g to 40G upgrade


FAQ 

Q1: Is this 10G SR optic compatible with mainstream network devices from different brands?
A: This standard 10g sr sfp is pre-flashed with IBM exclusive EEPROM for plug-and-play use on IBM/Lenovo devices. For Cisco, Arista, Juniper, Dell and other brand switches, we support free custom EEPROM modification to achieve full compatibility. 100% compliant with MSA mechanical and electrical standards; only a few legacy device firmware locks need pre-sales confirmation. Submit your device model for free compatibility verification before you bulk procure 10G SR transceivers.

Q2: What causes transceiver unsupported error prompts on IBM network hardware?
A: 82% of IBM third-party transceiver recognition failures are caused by mismatched EEPROM information, outdated device firmware or dirty LC-UPC fiber interfaces. This 10g sr sfp solves compatibility alarms through professional IBM EEPROM programming. The standard troubleshooting solution: upgrade device official firmware, clean fiber end faces, and re-seat the module. Avoid unprogrammed generic modules when you purchase IBM 46C3447 replacement optics.

Q3: Does this IBM-compatible transceiver support real-time digital optical monitoring?
A: Fully support DDM/DOM real-time monitoring functions in line with SFF-8472 industry standards. You can view real-time data including transmit power, receive power, laser bias current and module temperature through IBM device CLI or web management page. It helps network operation and maintenance personnel pre-judge link faults, which is essential for daily operation management after you install bulk 10g sr sfp modules.

Q4: Can I use green APC fiber jumpers to match this 10G SR transceiver?
A: It is not recommended and prohibited in formal deployment scenarios. This10g sr sfp is designed for UPC duplex LC interfaces. APC connectors will cause 8-12dB extra return loss, resulting in increased bit error rate and intermittent link disconnection. For IBM data center projects, please uniformly purchase OM3/OM4 UPC-terminated multimode jumpers to ensure link stability.

Q5: Will full-port deployment on 48-port IBM switches cause overheating problems?
A: No thermal safety risks. The single power consumption of this 10g sr sfp is ≤1.0W, and the total power consumption of full 48-port deployment is only 48W. It can operate stably in the 0-70℃ commercial temperature range. It is recommended to keep the cabinet ambient temperature below 40℃ and unobstructed airflow. This low-power design is very suitable for high-density port bulk deployment and large-scale wholesale projects.

Q6: What are the power and heat dissipation advantages of optical 10G SR modules over copper 10G modules?
A: This 10g sr sfp optical module consumes ≤1.0W per port, while traditional 10GBASE-T copper modules consume 2.5-4W per port. A fully loaded 48-port switch can reduce up to 144W-192W of heat load, effectively reducing cabinet cooling pressure and PUE value. Choosing optical 10G SR modules is the best solution for energy-saving transformation when you upgrade IBM data center networks in bulk.

Q7: Is hardware FEC error correction built into this 10G SR transceiver?
A: This 10g sr sfp does not integrate built-in FEC chips, which fully conforms to IEEE 10GBASE-SR standard specifications. Under standard OM3/OM4 fiber links, the bit error rate is stably ≤1×10⁻¹² without FEC. For high-risk long-term transmission links, you can enable switch-side ASIC-level FEC function. Confirm link quality requirements in advance when you procure 10G SR modules for core network deployment.

Q8: Is hot-swap plug-and-play supported for daily module replacement?
A: Yes, it fully complies with MSA hot-swap specifications, supporting non-power-off insertion and removal on IBM switches and blade devices. Only 1-3 seconds of brief link fluctuation will occur during replacement. It is recommended to complete module replacement during maintenance windows to avoid business impact. It is convenient for daily operation and maintenance after bulk purchase of 10g sr sfp spare modules.

Q9: Are third-party 10G SR modules reliable for IBM core data center networks?
A: Qualified factory-tested third-party10g sr sfp can fully meet mission-critical core network deployment requirements. Our modules pass 72-hour full-rate burn-in test with MTBF ≥1,000,000 hours. Inferior generic modules have hidden faults such as unstable laser power. It is recommended to reserve 10-15% spare modules when buying in bulk for IBM core network construction to ensure network redundancy.

Q10: What qualification certifications need to be confirmed before purchasing transceivers?
A: Before bulk procurement of 10g sr sfp modules, you must verify IEEE 802.3ae protocol certification, SFP+ MSA industry specification certification, RoHS environmental certification and Class1 laser safety certification. We can provide complete certification documents for IBM data center project audit. Avoid uncertified low-quality modules to prevent network operation risks.

Q11: What is the official warranty policy for these replacement transceivers?
A: HYTOPTODEVICE provides a 3-year official factory warranty for this 10g sr sfp, which is longer than the 1-year warranty of original IBM 46C3447 modules. We support direct replacement of defective products without repair. You can confirm warranty terms and after-sales service details in advance when signing bulk order contracts for IBM network upgrade projects.

Q12: Will improper module insertion damage IBM switch SFP ports?
A: Yes, forced and misaligned insertion is the main cause of SFP port damage, accounting for 19% of equipment port failures. When installing this 10g sr sfp, push it smoothly until you hear a clear click to ensure complete contact. It is recommended to train construction personnel uniformly before large-scale deployment to reduce equipment damage risks in bulk project implementation.

Q13: Why is there a huge price difference between OEM original and third-party 10G SR modules?
A: The high price of IBM original 46C3447 modules includes brand patent fees, channel markup and official after-sales premium. Our factory direct-sale 10g sr sfp eliminates middleman links while complying with official specifications, saving 55%-70% of procurement cost. The cost advantage is extremely prominent for large-volume wholesale and enterprise project centralized procurement.

Q14: How does the TCO of fiber 10G SR modules compare with 10G copper modules?
A: Fiber-based 10g sr sfp has far lower long-term TCO: ultra-low power consumption reduces cooling costs, supports 300m/400m long-distance transmission, and has stronger anti-interference ability. 10GBASE-T copper modules are limited to 30m transmission distance and have high power consumption. Choosing optical modules is the most cost-effective solution for long-term operation and maintenance when you renovate IBM data center networks.

Q15: Can 10G SR modules be used for stack link deployment between IBM switches?
A: Yes, this 10g sr sfp supports IBM switch stacking link deployment. It is matched with OM3/OM4 multimode fiber to build stable stack aggregation links. It is recommended to complete lab stability testing before official go-live to ensure stack link synchronization and data transmission stability. It is widely used in batch stacking transformation of IBM enterprise switch groups.
  • IBM 46C3447 Compatible 10G SR SFP Transceiver  | 850nm 300m MMF Bulk & Wholesale | HYTOPTODEVICE
  • IBM  Compatible 10G SR  SFP Transceiver
  • 10GBASE‑SR 850nm MMF,DDM 10G SR SFP transceiver,
  • unlock ibm switch third‑party transceiver 10G 850nm 300m from hytoptodevice
  • factory wholesale 10g sr sfp transceiver,enterprise campus network upgrade

Download