• 1000BASE‑BX‑U 80km SFP BIDI TRANSCEIVER FROM HYTOPTODEVICE
  • 80km single‑strand BiDi SFP  FROM HYTOPTODEVICE
  • HYTOPTODEVICE plug‑and‑play compatible BiDi SFP optical transceiver 80km SMF 1.25G
  • 1490/1550nm simplex LC gigabit module 80KM BIDI
  • 1000BASE‑BX‑U 80km SFP BIDI TRANSCEIVER FROM HYTOPTODEVICE
  • 80km single‑strand BiDi SFP  FROM HYTOPTODEVICE
  • HYTOPTODEVICE plug‑and‑play compatible BiDi SFP optical transceiver 80km SMF 1.25G
  • 1490/1550nm simplex LC gigabit module 80KM BIDI

Juniper SFP-GE80KT14R15 Compatible BiDi SFP Module 80km | 1000BASE-BX-U Tx1490Rx1550 Simplex LC Bulk & Wholesale | HYTOPTODEVICE

HYTOPTODEVICE Juniper SFP‑GE80KT14R15 compatible BiDi SFP module, 1000BASE‑BX‑U Tx1490nm‑Rx1550nm single‑strand OS1/OS2 SMF up to 80km simplex‑LC. Junos‑optimized EEPROM, trusted manufacturer & supplier, support custom EEPROM, private label, bulk wholesale for global distributors and system integrators.
NO. Brand  Compatible P/N Transceiver Type
1 Cisco GLC-BX80-UA SFP-G54-80LD
2 Cisco Cisco GLC-BX80-UA-I  SFP-G34-10LD
3 Brocade  E1MG-1G-BXU-80 SFP-G34-20LD
4 Dell  SFP-GE-BX80-1490 SFP-G35-20LD
5 Extreme MGBIC-BX80-U SFP-G34-40LD
6 H3C  SFP-GE-LH70-SM1490-BIDI SFP-G35-40LD
7 HPE H3C   SFP-1G-BXU-80  SFP-G45-1BLD
8 Huawei  SFP-GE-ZBXD1
9 Juniper  SFP-GE80KT14R15
10 MikroTik  S-4554LC80D-1490
11 Netgear  SFP-GE-BX80 
Description

Juniper SFP-GE80KT14R15 Compatible BiDi SFP Module 80km | 1000BASE‑BX‑U Tx1490Rx1550 Simplex LC Bulk & Wholesale | HYTOPTODEVICE

Product Overview

HYTOPTODEVICE Juniper SFP‑GE80KT14R15 compatible BiDi SFP module follows IEEE 802.3z gigabit Ethernet standard. Utilizing mature WDM wavelength‑division multiplexing technology, this BiDi SFP transmits and receives 1.25Gbps gigabit traffic over only one single‑mode fiber core, supporting up to 80km transmission reach with Tx1490nm / Rx1550nm wavelength scheme. Well‑suited for metro‑campus cross‑building interconnections, geographically‑dispersed branch backhaul, dark‑fiber service operation and large‑scale surveillance aggregation uplink projects constrained by limited fiber‑pair resources. Pre‑loaded Juniper Junos‑tuned EEPROM delivers smooth hardware recognition and suppresses third‑party transceiver alert logs on Juniper switching and routing hardware. As a professional BiDi SFP manufacturer and supplier, we provide pre‑purchase sample validation, volume BiDi SFP wholesale orders, custom private‑label marking and firmware fine‑tuning for global solution integrators, value‑added resellers and enterprise project buyers.

Key Technical Specifications

Juniper Compatible  SFP-GE80KT14R15  Vendor Name HYTOPTODEVICE
Form Factor SFP Max Data Rate 1.25Gbps
Wavelength TX1490nm/RX1550nm Max Distance 80km 
Connector Simplex LC Transmitter Type 1490nm DFB
Cable Type SMF Receiver Type PIN
TX Power 0~5dBm Receiver Sensitivity < -26.0dBm
Protocols SFF-8472 MSA Compliant, IEEE 802.3ah-2004 Operation Temperature 0 to 70°C (32 to 158°F)

For detailed technical specifications, please refer to the Datasheet

Usage Guidelines & Operational Best Practices

  • Complementary Pairing: BiDi transceivers must be deployed in matched pairs (e.g., TX1490/RX1550 with TX1550/RX1490). Mismatched wavelengths cannot establish a link.

  • Fiber Choice: Use Single-Mode Fiber (SMF) only. Do NOT use MMF.

  • Connector Match: Simplex LC (UPC/PC polish only). Do NOT use Duplex LC or APC.

  • Laser Safety: Class 1 Laser. Never look directly into optical ports or fiber end-faces.

  • ESD Safety: Wear an anti-static wrist strap before handling the transceiver.

  • Cleanliness & Dust: Keep dust caps installed on all unused ports. Clean fiber connectors with an optical cleaning pen before insertion; dust causes over 80% of link failures.

  • Optical Attenuator Required: For short-distance testing or links (<20 km), connect a 10dB–15dB attenuator to the RX port to prevent receiver damage.

  • Installation & Hot-Swap: MSA compliant. Insert and remove gently without powering down the device.

  • High Loss / Packet Drops: Ensure fiber bend radius exceeds 30 mm, inspect optical power levels, and clean connectors.

  • No Link: Verify complementary BIDI wavelength pairing requirement; clean Simplex LC end-faces; check port speed configuration.

For detailed operation instructions, please refer to the User Guide.


Full Compatibility List and Supported Devices


1. Supported Hardware & Firmware

This Juniper SFP‑GE80KT14R15 compatible BiDi SFP module is flashed with Junos‑optimized firmware to filter unknown‑transceiver alarm logs. It ensures stable operation under mainstream Juniper Junos OS for enterprise‑class switches and service routers。
● Juniper Enterprise Switches
 ○ EX Series: EX4300, EX4550, EX9200 Series
 ○ QFX Series: QFX5100, QFX5110 Series
● Juniper Service Routers & Security Gateways
 ○ MX Series Universal Routers: MX104, MX204, MX480, MX960
 ○ SRX Series Security Gateways: SRX380, SRX550, SRX650
● General Juniper Network Hardware
 ○ All Juniper Junos‑based network gear equipped with standard gigabit SFP slots

2. Multi-Brand Cross Compatibility

Built‑in MSA‑compliant hardware foundation enables cross‑vendor interoperability with Cisco, H3C, Juniper, Arista, Dell network equipment. Custom EEPROM re‑programming service is available for mixed‑vendor multi‑site enterprise networking deployments.

3. Free Value-Added Services

We provide professional customization for bulk Bidi sfp transceiver module orders, including firmware adaptation and custom labeling, meeting personalized procurement demands for compatible optical modules.

Primary Application Scenarios

● Single‑fiber point‑to‑point inter‑switch links for metro and large enterprise campus
● Cross‑building gigabit interconnection under scarce physical fiber‑pair inventory
● Multi‑site branch backhaul built on third‑party leased dark‑fiber assets
● Aggregation‑layer uplink for geographically dispersed IP surveillance camera clusters
● Legacy network modernization projects constrained by existing fiber‑cable infrastructure


Connectivity Solutions (Applications)

1.1GbE Switch-to-Switch Connectivity
HYTOPTODEVICE BiDi SFP transceiver for single‑fiber point‑to‑point enterprise deployment
2.1GbE Switch to Media Converter Connectivity
HYTOPTODEVICE 80km BiDi SFP for campus long‑haul gigabit inter‑building links
3.1G Structured Cabling
HYTOPTODEVICE single strand SFP for ISP FTTH and remote branch backhaul


Core Product Features

1. BiDi SFP: Maximizing Fiber Efficiency

Replaces traditional dual-fiber setups with single-strand WDM multiplexing, fully unlocking unused fiber capacity and streamlining bulk network upgrades.
hytoptodevice bidi sfp transceiver 1.25g LC connector SMF 80km

2.Double Your Capacity, Zero Extra Cabling

Transmit and receive on a single strand. By leveraging integrated WDM technology, this BiDi SFP module eliminates redundant wiring and slashes expansion costs for Cisco campus networks.

80km LC TX1490/RX1550 BiDi SFP Module double network bandwidth bulk wholesale chart for network upgrade

3. Efficient 1G Ethernet, Half the Fiber

Maximize data center efficiency. Delivers reliable Gigabit performance while lowering power consumption and halving fiber strand requirements.

gigabit single fiber bidirectional sfp module with low power

4. Plug-and-Play Guaranteed Compatibility

Factory‑programmed Juniper‑oriented EEPROM eliminates third‑party module warning events. Hot‑swap insertion works out‑of‑box for supported EX/QFX/MX platforms without complex command‑line adjustments. Specific Compatibility Video available upon request.

HYTOPTODEVICE compatible SFP bidi transceiver 80km SMF

5. 100% Tested, Zero-Defect Guaranteed
Maximum network uptime, zero surprises. Every BIDI SFP module undergoes rigorous physical testing in our Test Center before shipping to deliver rock-solid reliability out of the box.

HYTOPTODEVICE BiDi SFP transceiver full aging test for stable 80km single‑fiber operation


Frequently Asked Questions 

Q1: Does this 80km BiDi SFP follow Multi‑Source Agreement (MSA) industry specifications? A1: Yes, this BiDi SFP module strictly complies with SFP MSA specifications. As long as the media converter has a matching 1.25G SFP slot and supports single‑mode single‑fiber connections, basic interoperability can be achieved. Custom EEPROM may still be needed to eliminate Juniper Junos vendor‑specific alarm logs.

Q2: Is wavelength‑matching mandatory to establish a working BiDi fiber link? A2: Yes. BiDi technology requires complementary wavelengths. You must pair a TX1490nm/RX1550nm module at one end with a TX1550nm/RX1490nm module at the other. Using identical‑wavelength units on both sides will result in total link loss and LOS alarms.

Q3: Am I able to deploy this long‑reach BiDi transceiver with multimode fiber cabling? A3: No. Long‑reach transceivers (80km) are designed exclusively for single‑mode fiber. Multimode fiber cannot satisfy the optical dispersion and loss requirements for 80km 1000BASE‑BX‑U transmission. Use only OS1 or OS2 single‑mode fiber.

Q4: Can this 80km‑rated BiDi optic be used over short fiber spans below 10 km? A4: Yes, but you must use an optical attenuator (e.g., 10dB–15dB) to prevent burning out the sensitive receiver optics. Excessive incoming optical power will overload the PIN receiver and trigger unstable link performance or permanent hardware damage.

Q5: What physical fiber connector interface does this gigabit BiDi transceiver require? A5: This BiDi SFP module adopts simplex LC/UPC connector interface. Duplex LC connectors are not suitable for single‑strand BiDi operation. Make sure your patch cords are simplex‑LC terminated OS1/OS2 single‑mode fiber for correct physical mating.

Q6: Will DDM diagnostic features operate normally across different brands of network switches? A6: DDM/DOM follows SFF‑8472 standard, so real‑time readings of transmit power, receive power and temperature can work across most MSA‑compliant platforms. Some proprietary vendor OS including Juniper Junos may hide or restrict DDM readouts for third‑party transceivers even if hardware monitoring is functional.

Q7: Can contaminated fiber connector end‑faces cause module damage or degraded link performance? A7: Yes. Dust, oil stains and scratches on fiber end‑faces introduce insertion loss, signal reflection and waveform distortion. It causes intermittent packet loss, link flapping, and in severe cases contaminants can transfer onto the internal transceiver optical cavity and bring permanent component degradation. Always clean LC end‑faces before installation.

Q8: Would this commercial‑grade 1.25G BiDi optic be suitable for CPRI‑based cellular base‑tower site deployments? A8: This is commercial‑grade (0‑70℃) BiDi SFP module, not purpose‑built for CPRI radio‑tower interfaces. It can work for gigabit Ethernet backhaul at cell‑site cabinet only if your hardware supports 1000BASE‑BX‑U and cabinet maintains commercial temperature range. For true CPRI‑compliant tower links, select dedicated CPRI optical transceivers.

Q9: Which compliance documents and certifications should buyers verify before placing bulk orders? A9: This module meets RoHS environmental compliance, SFP MSA mechanical & electrical standards and IEEE 802.3z gigabit Ethernet specification. For wholesale procurement from manufacturer or supplier, you can request test reports covering optical parameters, aging test records and compliance documentation.

Q10: What typical MTBF rating can customers expect for this BiDi SFP under rated operating conditions? A10: Lab‑calculated typical MTBF value reaches greater than 1,000,000 hours under rated 0‑70℃ commercial operating conditions. Note MTBF is statistical theoretical index, it does not represent guaranteed service life; actual service life depends on cabinet cooling, fiber cleanliness and field operating environment.

Q11: Is custom‑tailored EEPROM programming available for obsolete or uncommon legacy network hardware during bulk purchasing? A11: Yes, custom EEPROM rewriting service is available for bulk orders. As a professional supplier & manufacturer, we can tune vendor‑specific profile for uncommon legacy switches and older hardware to clear unrecognized‑module alarms. Please supply your exact switch model, Junos OS firmware version and original OEM part number during pre‑sales consultation.

Q12: What factors trigger the “Unrecognized SFP Module” warning message shown on Juniper switch ports? A12: This alarm occurs when the Junos OS rejects default generic MSA EEPROM data. It is usually resolved by flashing the correct Juniper‑matched customized EEPROM profile. Confirm your device model and firmware version; some old legacy hardware also have hardware lock restrictions for third‑party optics.

Q13: Is it feasible to validate the transmit optical output power by using a standard optical power meter? A13: Yes, an optical power meter calibrated for 1490‑1550 nm wavelength band can measure the transmitter output power. Keep in mind you cannot directly measure receive power from outside; receive optical value can only be read via DDM/DOM diagnostic page on the connected network switch.

Q14: What key troubleshooting information should end‑users submit when contacting support for faulty transceiver issues? A14: Please provide: exact transceiver part number, host Juniper device model & Junos OS firmware version, DDM screenshots (Tx/Rx power, temperature), fiber type & total link distance, pairing partner BiDi module wavelength, observed symptoms (LOS, flapping, alarm text), and short description of your on‑site deployment environment. This information speeds‑up fault analysis greatly.

Packaging & Custom OEM Solutions

Individually sealed in ESD-safe packaging and ready to ship. We offer tailored OEM solutions—including custom logos and private labeling—to support high-volume distributors,wholesaler and system integrators.
HYTOPTODEVICE sfp-10g-sr optical transceiver module custom package

Why Network Engineers Choose HYTOPTODEVICE

HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.

  • 100% hardware-tested compatibility with Cisco, Huawei,Dell,Juniper, and Arista
  • ISO 9001:2015 certified manufacturing facility in Shenzhen
  • Full product range coverage:1.25G/10G/25G/40G/100G/200G/400G/800G/1.6T
  • In-stock supply & fast global shipping, average lead time of 3–5 business days with DHL/FedEx express options
  • Dedicated pre-sales engineering support for custom configurations
  • Actual hardware,actual switches,actual results.we publish compatibility test video,eliminate compatibility anxiety. you can watch before you buy. 
  • We can provide inspection and shipping videos to make you feel as if you are right here with the product.
  • Private Label support - EEPROM / firmware customization support

“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia

Quality Certification & Compliance

 At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.

We adhere to rigorous standards for our SFP modules and network solutions:

  • ISO 9001: Certified quality management and production consistency.

  • CE & FCC: Fully compliant for seamless Global Market Access.

  • RoHS: Committed to environmental responsibility and hazardous material control.

  • Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.

Certified Quality. Global Standards. Guaranteed Performance.




Rigorous Industrial Product Testing

   

100% 3rd Party Compatible

Partial Test Demonstration

  • 1000BASE‑BX‑U 80km SFP BIDI TRANSCEIVER FROM HYTOPTODEVICE
  • 80km single‑strand BiDi SFP  FROM HYTOPTODEVICE
  • HYTOPTODEVICE plug‑and‑play compatible BiDi SFP optical transceiver 80km SMF 1.25G
  • 1490/1550nm simplex LC gigabit module 80KM BIDI

Download