• 20km 100BASE-BX-D SFP BiDi Module, Extreme 10058-20 compatible Tx1550 Rx1310 simplex LC single mode fiber transceiver
  • Bulk supply Extreme compatible single fiber SFP BiDi module with DDM, 20km long-range optical transceiver for enterprise network
  •  100base-bx-D TX1550nm RX1310nm fiber port detail bidirectional sfp transceivers 20km
  •  hytoptodevice 100M 20km BiDi SFP transceiver compatible, simplex‑LC for cost‑saving long‑range fiber link upgrade
  • 20km 100BASE-BX-D SFP BiDi Module, Extreme 10058-20 compatible Tx1550 Rx1310 simplex LC single mode fiber transceiver
  • Bulk supply Extreme compatible single fiber SFP BiDi module with DDM, 20km long-range optical transceiver for enterprise network
  •  100base-bx-D TX1550nm RX1310nm fiber port detail bidirectional sfp transceivers 20km
  •  hytoptodevice 100M 20km BiDi SFP transceiver compatible, simplex‑LC for cost‑saving long‑range fiber link upgrade

Extreme 10058-20 Compatible 100BASE-BX-D BiDi SFP Module | Tx1550Rx1310 20km Simplex LC Bulk Wholesale | HYTOPTODEVICE

High-quality Extreme 10058-20 compatible bidi sfp module, 100BASE-BX-D single-strand optical transceiver with Tx1550/Rx1310 wavelength and 20km SMF reach. Simplex LC bidi sfp module supports DDM monitoring, full Extreme Networks plug-and-play compatibility and bulk wholesale for enterprise long-range fiber networking.support bulk wholesale, private label, custom EEPROM Programming and OEM for global importers, distributors and system integrators.
NO. Brand  Compatible P/N Transceiver Type
1 Cisco  GLC-FE-100BX-D  SFP-M35-10LD
2 Alcatel-Lucent  iSFP-100-BX-D  SFP-M31-10LD
3 Allied Telesis  AT-SPFXBD-LC-15 SFP-M31-40LD
4 Avaya  AA1419083-E5  SFP-M55-80LD
5 Brocade  E1MG-100BXD-20 
6 Extreme  10058-20 
7 H3C  SFP-FE-LX-SM1550-BIDI 
8 HPE(H3C)  JD101A 
9 HPE(Procurve)  J9099B
10 Huawei  SFP-FE-LX-SM1550-BIDI 
11 Juniper  SFP-FE20KT15R13
12 Netgear  SFP-FE-BX
Description

Extreme 10058-20 Compatible 100BASE-BX-D BiDi SFP Module | Tx1550Rx1310 20km Simplex LC Bulk Wholesale | HYTOPTODEVICE

Product Overview

HYTOPTODEVICE Extreme 10058-20 compatible bidi sfp module is a cost-effective single-fiber bidirectional transceiver for 100Mbps Fast Ethernet. Complying with IEEE 802.3ah and MSA standards, it adopts Tx1550nm/Tx12`0nm wavelength design, supporting stable 20km transmission over G.652/G.657 single-mode fiber.
Pre-flashed with dedicated Extreme firmware, this bidi sfp module delivers alarm-free plug-and-play operation for Extreme switches. Its single-strand WDM design saves 50% fiber resources, while built-in DDM enables real-time network monitoring. All modules pass strict calibration and aging tests, ensuring reliable performance for network upgrades, long-distance deployment and bulk orders.

Key Technical Specifications
 

Extreme Compatible

10058-20

Vendor Name HYTOPTODEVICE
Form Factor SFP Max Data Rate 155Mbps
Wavelength TX1550nm/RX1310nm Max Distance 20km 
Connector Simplex LC Transmitter Type 1550nm FP
Cable Type SMF Receiver Type PIN
TX Power -14.0~-8dBm Receiver Sensitivity < -32.0dBm
Protocols Fast Ethernet, Gigabit Fibre Channel, MSA Compliant Operation Temperature 0 to 70°C (32 to 158°F)

For detailed technical specifications, please refer to the Datasheet

Usage Guidelines & Best Practices

  1. Complementary Pairing Requirement Bidirectional transceivers must be deployed in matched wavelength pairs. This TX1550/RX1310 BiDi SFP Module requires a counterparty TX1310/RX1550 transceiver at the opposite fiber end; mismatched wavelength pairs cannot establish valid fiber links.
  2. Fiber Type Restriction Only use standard 9/125μm single mode fiber (SMF) with LC/UPC patch cords. This transceiver cannot operate normally on multi-mode fiber (MMF), which triggers severe attenuation and persistent random bit errors.
  3. Power Range & Short-Distance Testing This module operates with a transmit power (TX) of -14 to -8 dBm and a receiver overload threshold of -8 dBm. Since the maximum TX power does not exceed the overload limit, external optical attenuators are generally not required for short-distance connections or bench testing. However, always ensure that the received optical power (RX Power) remains strictly at or below -8 dBm to prevent receiver saturation.
  4. Optical Port Dust Protection LC optical ports and fiber end faces are highly sensitive to dust and fingerprint contamination. Always reinstall protective dust caps on idle module ports and unused fiber connectors after disconnection.
  5. Hot-Plugging Operation Guidance This MSA-compliant BiDi SFP Transceiver supports safe hot swap. Leave several seconds between removal and reinsertion to let Cisco IOS complete full hardware recognition and avoid unexpected link flapping.

For detailed operation instructions, please refer to the User Guide.


Full Compatibility List & Supported Devices

1. Supported Hardware & Firmware

This Extreme 10058-20 replacement bidi sfp module features custom Extreme EEPROM firmware for native device recognition. It works stably with all Extreme Summit and ExtremeSwitching series switches without configuration changes or system alarms.
  • Compatible Switch Series: Extreme Summit X150, X440, X450, X620, X670 and full ExtremeSwitching product lines
  • Port Adaptability: Standard 100/1000 adaptive SFP ports with automatic speed negotiation
  • Firmware Support: Fully compatible with all official Extreme OS firmware versions

2. Multi-Brand Cross Compatibility

As a standard MSA-compliant bidi sfp module, it delivers universal cross-brand compatibility, supporting mixed-vendor network deployment and module replacement for diverse enterprise network environments.
  • Compatible Brands: Cisco, Huawei, Juniper, HPE, Arista, H3C, ZTE
  • Applicable Devices: Enterprise switches, routers, optical media converters
  • Performance: Plug-and-play, stable link, no system error alarms

3. Free Value-Added Services

We provide exclusive free value-added services for bulk and project orders to simplify procurement and deployment:
  • Free compatibility test video provision for pre-project verification
  • Free DDM parameter test reports and factory aging test certificates
  • Free technical guidance for BiDi paired link deployment and fault debugging
  • Free customized packaging and label processing for wholesale orders
  • Long-term free after-sales technical consultation and remote guidance

Primary Application Scenarios

Designed for cost-effective 10km Fast Ethernet networking, this BiDi SFP module is widely used in commercial enterprises, campus parks, smart monitoring and broadband access fields:
  • ISP Last-Mile Access: 20km remote residential and commercial broadband fiber access
  • Enterprise Long-Range Networking: Cross-building and cross-park enterprise branch interconnection
  • Outdoor Monitoring System: Long-distance stable surveillance data transmission
  • Legacy Network Renovation: Upgrade dual-fiber networks with existing single fiber resources

Connectivity Solutions(Application)

1.Switch to Switch Point-to-Point Connection
Deploy this BX-D bidi sfp module with a complementary 100BASE-BX-U (Tx1310/Rx1550) module at the opposite end to build a complete 100Mbps bidirectional optical link. Zero configuration required, ideal for 20km long-distance point-to-point inter-device connection.

100BASE‑BX‑U BiDi SFP MODULE,Tx1310 Rx1550 20km

2.Switch to Media Converter Network Extension

Cooperate with optical media converters to extend traditional Ethernet transmission distance, widely used in outdoor monitoring, remote community broadband access and legacy network upgrade projects.
HYTOPTODEVICE 100BASE‑BX‑U BiDi SFP Transceiver,Tx1310 Rx1550 20km
Core Product Features

1.Boost Existing Fiber Utilization Using BiDi SFP
Advanced single-fiber WDM bidirectional transmission technology enables uplink and downlink data transmission via only one fiber core, saving 50% fiber resources and greatly reducing cabling and infrastructure costs for fiber-limited scenarios.
hytoptodevice bidi sfp transceiver module 100BASE-BX SIMPLEX LC smf
 

2. Low-Power Data Center Efficient Connectivity

Optimized low-power chip design with power consumption below 1W, reducing long-term equipment operating energy consumption while maintaining stable 100Mbps full-rate transmission.


HYTOPTODEVICE Bulk Wholesale Fiber‑Saving bidi Optical Transceiver  Module

3. Rigorous Host Device Testing for Full Cross-Brand Interoperability

All modules undergo batch compatibility testing on Alcatel-Lucent/Nokia and multi-brand devices. Custom firmware ensures zero-alarm operation and universal interoperability.


hytoptodevice  compatible Fast‑Ethernet BiDi Transceiver 20km Simplex LC 100BASE-BX

4.Comprehensive Factory Testing Delivers Consistent Stable Performance

Each module passes optical power calibration, high-low temperature aging, DDM function detection and long-term link testing to ensure consistent batch quality and long-term stable operation.

high-performance 155M bidi sfp module testing for global importers and distributors


FAQ

Q1: Why cannot two identical Tx1550/Rx1310 BiDi modules build a valid 20km Extreme network link?
A: Deploying two identical Tx1550/Rx1310 100BASE-BX-D modules on both ends of a fiber link results in conflicting transmit and receive wavelength channels, causing complete link failure and no data transmission. HYTOPTODEVICE’s Extreme 10058-20 compatible modules follow standard WDM wavelength division rules, requiring strict pairing with Tx1310/Rx1550 100BASE-BX-U modules. We provide pre-matched paired module sets to eliminate on-site pairing errors for Extreme network bulk deployments.

Q2: Can Extreme 100BASE-BX single-fiber BiDi modules interconnect with traditional dual-fiber LX optical modules?
A: No valid interconnection can be achieved between single-fiber 100BASE-BX-D BiDi modules and conventional dual-fiber 100BASE-LX transceivers. The two module types adopt different optical transmission mechanisms and protocol standards and cannot recognize cross-type optical signals. Our 10058-20 compliant modules are dedicated single-fiber networking components exclusively for matched BiDi link systems in Extreme network upgrade projects.

Q3: What causes unsupported transceiver warnings on Extreme Networks switch consoles?
A: Most generic third-party optical modules carry unrecognized EEPROM signature data and non-official firmware, triggering transceiver incompatibility alerts on Extreme switching platforms. HYTOPTODEVICE’s 10058-20 replacement modules are pre-flashed with Extreme-certified firmware and complete verification data, achieving zero-alarm plug-and-play recognition and thoroughly solving third-party compatibility issues for large-scale engineering deployments.

Q4: Do Extreme-compatible 100BASE-BX-D modules require manual port parameter setup?
A: No manual adjustment of speed or duplex mode is required. All HYTOPTODEVICE 20km 100BASE-BX-D BiDi transceivers support intelligent automatic negotiation, perfectly matching the 100Mbps full-duplex operating mode of Extreme Fast Ethernet ports. The true plug-and-play design greatly simplifies batch network deployment and daily equipment maintenance workflows.

Q5: Is reliable operation possible when using 20km-rated Extreme BiDi modules for short-distance links under 1km?
A: This Extreme 10058-20 compatible BiDi module features adaptive optical power control, supporting stable operation for link distances ranging from 500 meters to the full 20km rated range. No optical attenuator is required for short-distance deployment. The built-in anti-saturation protection circuit effectively prevents receiver burnout and signal distortion, adapting to complex on-site wiring scenarios for enterprise engineering construction.

Q6: What optical power budget ensures stable 20km long-distance transmission for Extreme 100BASE-BX-D links?
A: Our Extreme 10058-20 matching SFP BiDi modules adopt a premium 18dB optical power budget, professionally calibrated for 20km single-mode fiber long-distance transmission. This sufficient power margin fully offsets signal loss caused by fiber transmission attenuation, joint splicing gaps and connector docking loss, ensuring stable, error-free 100Mbps data transmission for long-distance cross-regional enterprise networking projects.

Q7: What interface specification do Extreme single-fiber BiDi SFP transceivers adopt?
A: This dedicated 100BASE-BX-D transceiver for Extreme Networks devices is equipped with a standard simplex LC interface. Unlike dual-core LC modules that consume two fiber strands, it realizes bidirectional signal transmission via only one single-mode fiber core, saving 50% of fiber resources. It serves as a high-cost-performance solution for fiber-scarce network renovation and large-scale wholesale deployment.

Q8: Are UPC or APC patch cords suitable for Extreme 10058-20 BiDi module connections?
A: Standard blue UPC simplex LC patch cords are strongly recommended for matching connection. This Extreme-specific BiDi module is optimized for flat UPC end-face optical links. Green APC end-face jumpers will cause excessive insertion loss, leading to unstable signal transmission and intermittent packet loss during 20km long-distance networking. We provide supporting optical accessory packages for one-stop engineering procurement.

Q9: Can 100BASE-BX-D modules support full-duplex synchronous 100Mbps data transmission?
A: Yes, consistent full-duplex synchronous transmission is fully supported. Leveraging advanced WDM wavelength division multiplexing technology, our Extreme-compatible BiDi modules separate upstream and downstream signals through independent wavelengths on a single fiber core. This design enables simultaneous sending and receiving of 100Mbps data without bandwidth compression or transmission delay, meeting high-stability requirements for enterprise monitoring and long-distance ISP broadband networks.

Q10: Do Extreme 100BASE-BX-D BiDi modules support hot-swap replacement?
A: All HYTOPTODEVICE 10058-20 compatible transceivers strictly comply with MSA international hot-swap specifications. The modules support online hot plugging and replacement without shutting down switches or interrupting ongoing network services. This low-interruption maintenance feature is ideal for 7×24-hour uninterrupted enterprise network operation and large-scale batch equipment deployment.

Q11: Do 100BASE-BX-D SFP module laser emissions pose safety hazards to operators?
A: This Extreme dedicated BiDi optical module adopts Class 1 ultra-safe laser chips that meet global safety certification standards. The low-power laser signal causes no damage to human eyes or skin during daily installation, debugging and long-term operational use. All finished products pass rigorous safety testing, supporting reliable batch procurement and long-term deployment in commercial, industrial and campus network environments.

Q12: How to maintain idle SFP ports to extend Extreme BiDi module service life?
A: For unused idle module ports, timely installation of matched dust-proof rubber caps is essential. This routine maintenance effectively isolates airborne dust, moisture and oil contamination, preventing optical channel pollution, signal attenuation and link packet loss. All bulk-ordered HYTOPTODEVICE Extreme compatible modules come with complete dust-proof accessories to ensure long-term stable operation of batch deployed network equipment.

Packaging & Custom OEM Solutions

Each Bidi module is factory-sealed in ESD-shielding, anti-static packaging—individually protected, quality-checked, and ready to ship the moment you place your order. We understand that distributors, wholesalers, and system integrators need more than just a product. That's why our flexible OEM and ODM programs include custom branding, private-label packaging, and your own logo on every unit—so you can grow your brand with confidence, without compromising on quality or lead time.
HYTOPTODEVICE 1000base-bx bidi transceiver  custom packaging


Why Network Engineers Choose HYTOPTODEVICE

HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
  • 100% hardware-tested compatibility with Cisco, Huawei,Dell,Juniper, and Arista
  • ISO 9001:2015 certified manufacturing facility in Shenzhen
  • Full product range coverage:1.25G/10G/25G/40G/100G/200G/400G/800G/1.6T
  • In-stock supply & fast global shipping, average lead time of 3–5 business days with DHL/FedEx express options
  • Dedicated pre-sales engineering support for custom configurations
  • Actual hardware,actual switches,actual results.we publish compatibility test video,eliminate compatibility anxiety. you can watch before you buy. 
  • We can provide inspection and shipping videos to make you feel as if you are right here with the product.
  • Private Label support - EEPROM / firmware customization support

“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia

Quality Certification & Compliance

 At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.

We adhere to rigorous standards for our SFP modules and network solutions:

  • ISO 9001: Certified quality management and production consistency.

  • CE & FCC: Fully compliant for seamless Global Market Access.

  • RoHS: Committed to environmental responsibility and hazardous material control.

  • Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.

Certified Quality. Global Standards. Guaranteed Performance.




Rigorous Industrial Product Testing

   

100% 3rd Party Compatible

Partial Test Demonstration

Others

 



 

  • 20km 100BASE-BX-D SFP BiDi Module, Extreme 10058-20 compatible Tx1550 Rx1310 simplex LC single mode fiber transceiver
  • Bulk supply Extreme compatible single fiber SFP BiDi module with DDM, 20km long-range optical transceiver for enterprise network
  •  100base-bx-D TX1550nm RX1310nm fiber port detail bidirectional sfp transceivers 20km
  •  hytoptodevice 100M 20km BiDi SFP transceiver compatible, simplex‑LC for cost‑saving long‑range fiber link upgrade

Download