Q1: What network issue occurs when deploying identical Tx1550/Rx1310 BiDi modules at both fiber link ends?
A: Deploying identical Tx1550/Rx1310 BiDi modules at both link ends will cause wavelength mismatch and fail to establish network connectivity. HYTOPTODEVICE’s Allied Telesis AT-SPFXBD-LC-15 compatible modules adopt professional Tx1550/Rx1310 wavelength design, which must pair with standard Tx1310/Rx1550 BX-U modules. We provide matched module bulk solutions for project deployment, avoiding on-site pairing errors for enterprise procurement projects.
Q2: Is cross-communication possible between 100BASE-BX single-fiber transceivers and conventional 100BASE-LX dual-fiber modules?
A: No interconnection is supported between 100BASE-BX single-fiber BiDi transceivers and dual-fiber 100BASE-LX modules, due to inconsistent wavelength transmission modes and working protocols. Our wholesale 100BASE-BX-D modules strictly follow single-fiber WDM standards, exclusively matching BiDi paired devices, and are the dedicated networking solution for Allied Telesis device batch upgrades.
Q3: What triggers the unsupported transceiver error prompt on Allied Telesis switch consoles?
A: Unsupported transceiver warnings mainly stem from mismatched module EEPROM signature data and unrecognized third-party firmware. HYTOPTODEVICE’s factory-calibrated AT-SPFXBD-LC-15 compatible modules are pre-flashed with exclusive Allied Telesis verified firmware, realizing zero-alarm plug-and-play recognition. Ideal for large-scale engineering procurement, our modules eliminate compatibility alarm issues completely.
Q4: Are manual port speed and duplex parameter configurations required for this BiDi SFP module?
A: No manual configuration is required. All HYTOPTODEVICE 100BASE-BX-D 15km BiDi transceivers support automatic speed and duplex negotiation, perfectly adapting to 100Mbps Fast Ethernet port protocols of Allied Telesis and mainstream brand switches. This plug-and-play design greatly simplifies operation steps for bulk network deployment and daily maintenance.
Q5: Can 15km-rated BiDi transceivers safely operate for short-distance fiber links around 500 meters?
A: Yes, our Allied Telesis compatible 15km BiDi modules support adaptive operation for short-distance scenarios above 500 meters without additional optical attenuators. Built-in optical power overload protection avoids receiver burnout and signal saturation, ensuring stable links for both short-range wiring and medium-distance transmission, suitable for diversified on-site construction procurement needs.
Q6: What optical power budget specification ensures stable signal transmission for 15km 100BASE-BX fiber links?
A: HYTOPTODEVICE AT-SPFXBD-LC-15 compatible transceivers feature a standard 15dB optimized optical power budget. This professional parameter fully offsets fiber transmission attenuation, splicing loss and connector loss in 15km single-mode fiber links, guaranteeing error-free and stable medium-distance network transmission for enterprise park and regional networking projects.
Q7: What type of fiber connector is equipped on simplex single-fiber BiDi SFP transceivers?
A: This 100BASE-BX-D BiDi transceiver adopts a standard simplex LC optical connector, which occupies only one fiber core to realize bidirectional data transmission. Compared with duplex LC interfaces, it saves half of fiber resources, making it a cost-effective choice for fiber-resource-limited network renovation and large-scale wholesale procurement projects.
Q8: Which type of LC patch cord is compatible with this 100BASE-BX-D SFP transceiver, UPC or APC?
A: We recommend standard blue UPC LC simplex patch cords for matching use. This Allied Telesis compatible BiDi module is designed for UPC flat end-face optical links; APC green end-face jumpers will cause excessive insertion loss and unstable links. We support bundled sales of matching optical accessories, providing one-stop procurement solutions for network engineering projects.
Q9: Does the 100BASE-BX standard support full-duplex synchronous 100Mbps data transmission?
A: Yes. Adopting advanced WDM wavelength division multiplexing technology, our 100BASE-BX-D single-fiber modules isolate transmit and receive signals on a single fiber core, supporting stable 100Mbps full-duplex synchronous communication. No bandwidth loss occurs during 15km transmission, meeting high-stability data transmission demands of ISP broadband and enterprise monitoring projects.
Q10: Do 100BASE-BX BiDi SFP modules support hot-swap online replacement?
A: All HYTOPTODEVICE 100BASE-BX-D BiDi transceivers comply with MSA international hot-swap standards, supporting online plug-and-play replacement without powering off devices or interrupting network operation. This feature effectively reduces maintenance downtime, suitable for 7×24-hour uninterrupted operating enterprise networks and large-scale batch deployment scenarios.
Q11: Are laser emissions from 100BASE-BX SFP optical modules hazardous to human health?
A: Our 100BASE-BX-D optical modules adopt Class 1 safe laser design, complying with international laser safety standards. The built-in low-power laser chip causes no harm to human eyes and bodies during normal use. All products pass strict safety certification, safe and reliable for commercial, industrial and campus network large-scale procurement and long-term use.
Q12: How to properly maintain idle transceiver ports on unused BiDi SFP modules?
A: When the module port is idle, please install the original dust cap in time to prevent dust, oil stains and moisture from contaminating the optical channel, which avoids signal attenuation and link packet loss. HYTOPTODEVICE’s bulk-supplied BiDi modules are equipped with standard dust-proof accessories, effectively extending module service life and reducing after-sales failure rates for batch project equipment operation.
Packaging & Custom OEM Solutions
Each Bidi module is factory-sealed in ESD-shielding, anti-static packaging—individually protected, quality-checked, and ready to ship the moment you place your order. We understand that distributors, wholesalers, and system integrators need more than just a product. That's why our flexible OEM and ODM programs include custom branding, private-label packaging, and your own logo on every unit—so you can grow your brand with confidence, without compromising on quality or lead time.
Why Network Engineers Choose HYTOPTODEVICE
HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.