• hytoptodevice bidi transceiver 1.25g 120km SMF
  • BIDI SFP MODULE MANUFACTURER HYTOPTODEVICE
  • HYTOPTODEVICE plug‑and‑play compatible BiDi SFP optical transceiver 120km SMF 1.25G
  • hytoptodevice offer 1000BASE-BX-U bidi transceiver 120km SMF 1.25g
  • hytoptodevice bidi transceiver 1.25g 120km SMF
  • BIDI SFP MODULE MANUFACTURER HYTOPTODEVICE
  • HYTOPTODEVICE plug‑and‑play compatible BiDi SFP optical transceiver 120km SMF 1.25G
  • hytoptodevice offer 1000BASE-BX-U bidi transceiver 120km SMF 1.25g

Dell SFP-GE-BX120U-1490 Compatible BiDi Transceiver 120km | 1000BASE-BX-U Tx1490Rx1550 Simplex LC Bulk Wholesale | HYTOPTODEVICE

HYTOPTODEVICE, reliable BIDI TRANSCEIVER manufacturer and supplier, supplies Dell SFP-GE-BX120U-1490 compatible BiDi transceiver, 1000BASE-BX-U Tx1490nm/Rx1550nm simplex LC, 120km over OS1/OS2 single mode fiber. Source bulk wholesale BIDI TRANSCEIVER with custom EEPROM programming, OEM & private label for global resellers, system builders and large network project buyers.
NO. Brand  Compatible P/N Transceiver Type
1 Cisco GLC-BX120-U SFP-G54-1BLD
2 Juniper  SFP-GE120KT14R15   SFP-G34-10LD
3 Brocade E1MG-1G-BXU-120  SFP-G34-20LD
4 Dell  SFP-GE-BX120U-1490  SFP-G35-20LD
5 Extreme MGBIC-BX120-U  SFP-G34-40LD
6 H3C   SFP-GE-120-SM1490-A  SFP-G35-40LD
7 HPE H3C   SFP-1G-BXU-120  SFP-G45-80LD
8 Netgear  SFP-GE-BX120-U
Description

Dell SFP-GE-BX120U-1490 Compatible BiDi Transceiver 120km | 1000BASE-BX-U Tx1490Rx1550 Simplex LC Bulk Wholesale | HYTOPTODEVICE


Product Overview

HYTOPTODEVICE is a trusted BIDI TRANSCEIVER manufacturer & supplier. This Dell SFP-GE-BX120U-1490 compatible BiDi transceiver meets IEEE 802.3ah 1000BASE-BX-U standards. It delivers 1.25Gbps bidirectional data transmission up to 120km across OS1/OS2 single-mode fiber with simplex LC connector at Tx1490nm/Rx1550nm. Preloaded Dell optimized EEPROM enables seamless plug-and-play deployment. We offer bulk wholesale BIDI TRANSCEIVER and custom EEPROM programming, OEM and private label services for global network resellers and system integrators.

Key Technical Specifications

Dell Compatible   SFP-GE-BX120U-1490   Vendor Name HYTOPTODEVICE
Form Factor SFP Max Data Rate 1.25Gbps
Wavelength TX1490nm/RX1550nm Max Distance 120km 
Connector Simplex LC Transmitter Type 1490nm DFB
Cable Type SMF Receiver Type APD
TX Power 1~5dBm Receiver Sensitivity < -32.0dBm
Protocols SFF-8472 MSA Compliant, IEEE 802.3ah-2004 Operation Temperature 0 to 70°C (32 to 158°F)

For detailed technical specifications, please refer to the Datasheet

Usage Guidelines & Operational Best Practices

  • Complementary Pairing: BiDi transceivers must be deployed in matched pairs (e.g., TX1490/RX1550 with TX1550/RX1490). Mismatched wavelengths cannot establish a link.

  • Fiber Choice: Use Single-Mode Fiber (SMF) only. Do NOT use MMF.

  • Connector Match: Simplex LC (UPC/PC polish only). Do NOT use Duplex LC or APC.

  • Laser Safety: Class 1 Laser. Never look directly into optical ports or fiber end-faces.

  • ESD Safety: Wear an anti-static wrist strap before handling the transceiver.

  • Cleanliness & Dust: Keep dust caps installed on all unused ports. Clean fiber connectors with an optical cleaning pen before insertion; dust causes over 80% of link failures.

  • Optical Attenuator Required: For short-distance testing or links (<30 km), connect a 10dB–15dB attenuator to the RX port to prevent receiver damage.

  • Installation & Hot-Swap: MSA compliant. Insert and remove gently without powering down the device.

  • High Loss / Packet Drops: Ensure fiber bend radius exceeds 30 mm, inspect optical power levels, and clean connectors.

  • No Link: Verify complementary BIDI wavelength pairing requirement; clean Simplex LC end-faces; check port speed configuration.

For detailed operation instructions, please refer to the User Guide.


Full Compatibility List and Supported Devices


1. Supported Hardware & Firmware

This SFP-GE-BX120U-1490 compatible BiDi transceiver uses Dell tuned EEPROM to avoid unsupported transceiver warnings and works reliably with Dell OS firmware.
● Dell PowerSwitch Series
 ○ S4048-ON, S5048F-ON, S5148F-ON, S6010-ON, S6100-ON
● Dell PowerConnect Series
 ○ 5424, 5448, 6224, 6248, 7024, 7048, 8024F
● Dell Networking Routers
 ○ N2000, N3000, N4000 Series
● General Dell hardware
 ○ All Dell network hardware equipped with standard gigabit SFP ports supporting 1.25G speed

2. Multi-Brand Cross Compatibility

Built on universal MSA standards, this BiDi transceiver supports cross-vendor interoperability with Cisco, MikroTik, H3C, Netgear, Dell hardware. As your trusted BIDI TRANSCEIVER supplier, we provide custom EEPROM programming service for mixed-brand metro network deployments.

3. Free Value-Added Services

We provide professional customization for bulk Bidi transceiver module orders, including firmware adaptation and custom labeling, meeting personalized procurement demands for compatible optical modules.

Primary Application Scenarios

● Single-fiber point-to-point inter-switch links for metro enterprise networks
● Cross-town gigabit interconnection with limited available fiber pairs
● Remote branch office long-haul backhaul over leased dark fiber lines
● Extra-long-distance uplink for distributed IP camera monitoring systems
● Metro network upgrade projects with constrained fiber infrastructure


Connectivity Solutions (Applications)

1.1GbE Switch-to-Switch Connectivity
HYTOPTODEVICE BiDi  transceiver for single‑fiber point‑to‑point enterprise deployment
2.1GbE Switch to Media Converter Connectivity
HYTOPTODEVICE 120km BiDi transceiver for campus long‑haul gigabit inter‑building links
3.1G Structured Cabling
HYTOPTODEVICE single strand SFP module for ISP FTTH and remote branch backhaul


Core Product Features

1. BiDi SFP: Maximizing Fiber Efficiency

Replaces traditional dual-fiber setups with single-strand WDM multiplexing, fully unlocking unused fiber capacity and streamlining bulk network upgrades.
hytoptodevice 120km single fiber BiDi optic

2.Double Your Capacity, Zero Extra Cabling

Transmit and receive on a single strand. By leveraging integrated WDM technology, this BiDi transceiver eliminates redundant wiring and slashes expansion costs for  campus networks.

Tx1490 Rx1550 simplex LC bidi module from hytoptodevice

3. Efficient 1G Ethernet, Half the Fiber

Maximize data center efficiency. Delivers reliable Gigabit performance while lowering power consumption and halving fiber strand requirements.

bulk wholesale SFP BIDI MODULE with low power

4. Plug-and-Play Guaranteed Compatibility

Factory pre-programmed Dell-compatible EEPROM suppresses third-party module warning alerts. Hot-swap works directly on supported switches and routers without complex CLI tuning; custom EEPROM can be arranged for bulk orders.Specific Compatibility Video available upon request.

HYTOPTODEVICE compatible  bidi transceiver 120km SMF

5. 100% Tested, Zero-Defect Guaranteed
Maximum network uptime, zero surprises. Every BIDI Transceiver undergoes rigorous physical testing in our Test Center before shipping to deliver rock-solid reliability out of the box.

HYTOPTODEVICE BiDi transceiver full aging test for stable 120km single‑fiber operation


Frequently Asked Questions 

Q1: Will this 1.25G 120km single strand BiDi optic operate correctly on Dell, Cisco or MikroTik gigabit switches?
A: Yes, this HYTOPTODEVICE BIDI TRANSCEIVER works on these switch platforms equipped with standard gigabit SFP slots. Pre-calibrated EEPROM ensures drop-in interoperability for compatible 1.25G SFP ports.

Q2: Is it possible to install this BiDi transceiver into a 10G SFP+ network switch port?
A: Yes, most SFP+ ports offer backward compatibility for 1.25G SFP transceivers. You must manually set port speed to 1G on the switch; auto-negotiation may fail without manual port configuration.

Q3: Do I need to upgrade my switch firmware for the hardware to detect this BiDi optical transceiver?
A: No extra firmware upgrade is required for most supported switches. HYTOPTODEVICE custom EEPROM handles module identification; only verify your existing firmware supports standard MSA SFP hardware.

Q4: What steps can I take if my switch shows an "unsupported transceiver" warning after inserting this BiDi module?
A: This alert can be cleared through switch CLI adjustments or pre-customized EEPROM ordered from HYTOPTODEVICE. The warning is only vendor ID validation, and the optic still transmits stable 1.25G optical signals.

Q5: Can I pair this 120km BiDi transceiver with a 40km or 80km BiDi optic at the opposite fiber end?
A: Yes, provided the TX/RX wavelengths match and you use an inline optical attenuator to prevent overloading the shorter-reach receiver. Mismatched power budget remains the main risk even with correct wavelength pairing.

Q6: How can field technicians quickly tell apart TX1490 and TX1550 BiDi modules during on-site installation?
A: You can quickly identify them from printed markings on the module housing. HYTOPTODEVICE clearly prints Tx/Rx wavelength specs on the module label to avoid reversed pairing during site deployment.

Q7: Will short cable bench testing of this 120km BiDi module cause permanent damage to the built-in receiver?
A: Yes, high transmit power will risk permanent damage to the APD receiver on short fiber links. Fit a 10~15dB inline optical attenuator to reduce incoming optical power during bench lab testing.

Q8: Are inline optical attenuators required for field installation of this BiDi transceiver on fiber links?
A: Attenuators are required for all fiber spans shorter than 30km. Use a 10–15dB inline attenuator for these short runs; links longer than 30km have sufficient natural fiber loss and no attenuator is needed for this HYTOPTODEVICE 120km BiDi transceiver.

Q9: Can this 120km BiDi transceiver run over multimode fiber (MMF) cable infrastructure?
A: No, this 120km BiDi transceiver only supports OS1/OS2 single-mode fiber. MMF has high optical attenuation at 1490/1550nm and cannot sustain long-distance gigabit transmission.

Q10: What real-time optical performance readings can be retrieved via the DDM monitoring function?
A: DDM continuously tracks critical optical performance metrics. You can read transmit power, receive power, module temperature and supply voltage through switch CLI or web UI on this HYTOPTODEVICE BIDI TRANSCEIVER.

Q11: Can DDM monitoring deliver early alerts before the long-distance fiber connection fully drops offline?
A: Yes, DDM has pre-configured pre-failure alarm thresholds for optical power. It alerts network engineers before total link loss, helping avoid unexpected outages on metro long haul fiber links.

Q12: Can I deploy this BiDi transceiver inside outdoor cabinets without temperature control?
A: This commercial grade HYTOPTODEVICE BIDI TRANSCEIVER supports operating temperature of 0°C ~ +70°C and cannot withstand extreme outdoor temperature. Choose HYTOPTODEVICE industrial version (-40°C ~ +85°C) if deployed inside unconditioned outdoor cabinets.

Q13: What is the maximum power consumption of this SFP BiDi optical transceiver?
A: Max power consumption of this SFP transceiver is ≤1W. Its low-power DFB laser plus APD receiver design keeps heat low for dense SFP slot deployment inside enterprise switch racks.

Q14: Why does the 120km BiDi transceiver carry higher cost than 10km or 40km BiDi optical modules?
A: Higher-grade optical components increase manufacturing cost. It adopts high-performance DFB laser, high-sensitivity APD receiver and precise wavelength filters required for reliable 120km single-fiber transmission.

Q15: What technical support services can HYTOPTODEVICE provide when long haul fiber links become unstable or fail to come up?
A: HYTOPTODEVICE provides professional pre-sales and after-sales technical support for bulk wholesale BIDI TRANSCEIVER orders. Our engineering team assists troubleshooting and offers field testing guidance for BiDi transceiver deployments.

Packaging & Custom OEM Solutions

Individually sealed in ESD-safe packaging and ready to ship. We offer tailored OEM solutions—including custom logos and private labeling—to support high-volume distributors,wholesaler and system integrators.
HYTOPTODEVICE sfp-10g-sr optical transceiver module custom package

Why Network Engineers Choose HYTOPTODEVICE

HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.

  • 100% hardware-tested compatibility with Cisco, Huawei,Dell,Juniper, and Arista
  • ISO 9001:2015 certified manufacturing facility in Shenzhen
  • Full product range coverage:1.25G/10G/25G/40G/100G/200G/400G/800G/1.6T
  • In-stock supply & fast global shipping, average lead time of 3–5 business days with DHL/FedEx express options
  • Dedicated pre-sales engineering support for custom configurations
  • Actual hardware,actual switches,actual results.we publish compatibility test video,eliminate compatibility anxiety. you can watch before you buy. 
  • We can provide inspection and shipping videos to make you feel as if you are right here with the product.
  • Private Label support - EEPROM / firmware customization support

“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia

Quality Certification & Compliance

 At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.

We adhere to rigorous standards for our SFP modules and network solutions:

  • ISO 9001: Certified quality management and production consistency.

  • CE & FCC: Fully compliant for seamless Global Market Access.

  • RoHS: Committed to environmental responsibility and hazardous material control.

  • Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.

Certified Quality. Global Standards. Guaranteed Performance.




Rigorous Industrial Product Testing

   

100% 3rd Party Compatible

Partial Test Demonstration

  • hytoptodevice bidi transceiver 1.25g 120km SMF
  • BIDI SFP MODULE MANUFACTURER HYTOPTODEVICE
  • HYTOPTODEVICE plug‑and‑play compatible BiDi SFP optical transceiver 120km SMF 1.25G
  • hytoptodevice offer 1000BASE-BX-U bidi transceiver 120km SMF 1.25g

Download