• Brocade E1MG-LHA Compatible 1000BASE-ZX Transceiver Module | SFP 1550nm 80km SMF Bulk Wholesale | HYTOPTODEVICE
  • Brocade E1MG-LHA compatible transceiver module from hytoptodevice
  • 1000BASE-ZX 80km SMF SFP transceiver module
  • 1550nm long range gigabit transceiver module from hytoptodevice
  • buy affordable Brocade compatible transceiver module
  • Brocade E1MG-LHA Compatible 1000BASE-ZX Transceiver Module | SFP 1550nm 80km SMF Bulk Wholesale | HYTOPTODEVICE
  • Brocade E1MG-LHA compatible transceiver module from hytoptodevice
  • 1000BASE-ZX 80km SMF SFP transceiver module
  • 1550nm long range gigabit transceiver module from hytoptodevice
  • buy affordable Brocade compatible transceiver module

Brocade E1MG-LHA Compatible 1000BASE-ZX Transceiver Module | SFP 1550nm 80km SMF Bulk Wholesale | HYTOPTODEVICE

HYTOPTODEVICE provides factory wholesale Brocade E1MG-LHA compatible transceiver module. This 1000BASE-ZX 1550nm 80km SMF SFP transceiver features full Brocade zero-alarm compatibility and DOM monitoring. It solves key procurement pain points such as expensive original modules, stock shortages and firmware incompatibility, supporting plug-and-play deployment on Brocade switches with low-MOQ bulk orders.
NO. Brand  Compatible P/N Transceiver Type
1 Cisco  SFP-GE-Z  SFP-G85-5LD
2 Cisco GLC-ZX-SMD SFP-G31-10LD
3 Cisco GLC-ZX-SM-RGD SFP-G31-40LD
4 Arista Networks  SFP-1G-EX-80 SFP-G55-100LD
5 H3C  SFP-GE-LH80-SM1550 SFP-G55-120LD
6 Juniper  EX-SFP-1GE-LX70 SFP-G55-160LD
7 Huawei  S-SFP-GE-LH80-SM1550
8 Brocade  E1MG-LHA




Description

Brocade E1MG-LHA Compatible 1000BASE-ZX Transceiver Module | SFP 1550nm 80km SMF Bulk Wholesale | HYTOPTODEVICE

Product Overview

This HYTOPTODEVICE 1000BASE-ZX transceiver module is fully compatible with Brocade E1MG-LHA. Custom adaptive firmware eliminates common compatibility issues like device rejection and system alarms, enabling plug-and-play deployment on mainstream Brocade network devices without extra configuration.
Built with high-stability 1550nm DFB laser chips, this SFP transceiver module delivers ultra-low signal attenuation, supporting stable 80km long-distance transmission over standard G.652 single-mode fiber for enterprise long-haul backbone networking.
All Brocade compatible transceiver modules pass strict aging and compatibility tests for stable link performance. We support sample testing and bulk procurement, solving enterprise pain points of high original module costs and long delivery cycles.

Key Technical Specifications 

Brocade Compatible  E1MG-LHA Vendor Name HYTOPTODEVICE
Form Factor SFP Max Data Rate 1.25Gbps
Wavelength 1550nm Max Distance 80km 
Connector Duplex LC Transmitter Type DFB 1550nm
Cable Type SMF Receiver Type PIN
TX Power 0~5dBm Receiver Sensitivity < -26.0dBm
Typical Power Consumption ≤1W Receiver Overload -1dBm
Bit Error Ratio (BER) 1E-12 DDM/DOM Support
Protocols SFF-8472 MSA Compliant, IEEE 802.3ah-2004 Operation Temperature 0 to 70°C (32 to 158°F)

Usage Guidelines & Best Practices

  • Fiber Choice: Use Single-Mode Fiber (SMF) only. Do NOT use MMF
  • Laser Safety: Never look directly into optical ports or fiber ends.
  • ESD Safety:: Wear an anti-static wrist strap before handling.
  • Connector Match: UPC/PC polish only. Do NOT use APC

  • Cleanliness & Dust: Keep dust caps on all unused ports and connectors at all times. Clean fiber end-faces with a optical cleaning pen before insertion; dust causes over 80% of optical link failures.

  • Optical Attenuator Required for Short Links: For testing or short-distance connections (<10 km), connect a 10dB–15dB optical attenuator to the RX port to prevent damaging the receiver.

  • Installation & Hot-Swap Rules:MSA hot-swappable. Insert/remove gently without powering down.

  • High Loss/Packet Drops: Check fiber bend radius (>30 mm); inspect optical power levels; clean optical connectors 

  • No Link: Swap TX/RX fiber connections; clean fiber end-faces; verify port settings.

    Links to the Datasheet, User Guide and Compatibility Guides are available on the product page.

Full Compatibility List and Supported Devices

1. Supported Hardware & Firmware

HYTOPTODEVICE Brocade E1MG-LHA compatible transceiver module adopts adaptive firmware matching Brocade official verification, fixing common issues like device unrecognition, alarms and firmware update failures, compatible with new and legacy Brocade firmware versions.
  • Brocade FastIron / ICX Series Switches
  • Brocade NetIron Routers & Network Switches
  • All Brocade devices with standard SFP gigabit slots

2. Multi-Brand Cross Compatibility

This 1000BASE-ZX transceiver module complies with universal MSA standards, achieving stable cross-brand interconnection with Huawei, Cisco, H3C and other devices to resolve multi-vendor network compatibility issues.

3. Free Value-Added Services

We provide professional customization for bulk transceiver module orders, including firmware adaptation and custom labeling, meeting personalized procurement demands for compatible optical modules.


Main Application Scenarios

  • Enterprise Long-Haul Backbone Networking: 80km Brocade-compatible transceiver module for cross-city long-distance fiber links, expanding network coverage.
  • Distributor Bulk Stocking: Cost-effective transceiver module wholesale reduces stocking costs for network equipment suppliers.
  • Brocade Network Upgrade: Replace short-range modules with 80km long-haul transceiver modules to extend network transmission distance.
  • Remote Branch Networking: Low-loss 1550nm transceiver module stabilizes signal transmission for remote campus and enterprise branch connections.

Connectivity Solutions(Applications) 

1.1GbE Switch-to-Switch Connectivity
Factory wholesale compatible 1000BASE-ZX 80km transceiver module for long haul network deployment

2.1GbE Switch to Media Converter Connectivity1550nm 80km SMF long range gigabit transceiver module cheap bulk order for switch devices

3.1G Structured Cabling
Cost-effective long-haul 80km transceiver module bulk procurement solution for enterprise network upgrade


The Core Feature

1. Low-Power, Cost-Effective Long-Haul Connectivity

Designed for high-reliability data center networks, this 1.25G 1550nm SFP transceiver module supports long-reach transmission up to 80km. Featuring low power consumption and high cost-efficiency, it is the ideal choice for expanding your Gigabit Ethernet coverage.

HYTOPTODEVICE 1000BASE-ZX 80km SMF transceiver module with low power consumption


2.
Host-Tested for Proven Interoperability

All transceiver modules pass real device testing. Pre-flashed EEPROM ensures zero-alarm recognition, fixing third-party module incompatibility and link flapping for safe bulk purchase.Specific Compatibility Video available upon request.

Plug-and-play  1000base-zx replacement module zero-error compatible with switches and routers


3.100% Tested for Zero-Defect Reliability

Step inside our  Test Center  to see every optical module is 100% tested before shipment, ensuring zero-defect reliability and maximum uptime for your network.

HYTOPTODEVICE bulk 80km SFP ZX optical module wholesale with 100% test


FAQ

Q1: Are these Brocade E1MG-LHA replacement transceiver modules plug-and-play?
A: Absolutely. Our custom-tuned firmware matches Brocade device verification standards perfectly. The transceiver module works out of the box on compatible Brocade switches and routers with zero errors or system alarms, no complex setup required.

Q2: Will switch firmware updates block third-party Brocade transceiver modules?

A: Our EEPROM coding is continuously optimized to adapt to latest Brocade system iterations. This compatible transceiver module maintains normal recognition and stable operation after device firmware upgrades, avoiding offline or unrecognized module failures.

Q3: Does this 80km Brocade transceiver support hot-swap installation?

A: Yes. Designed with standard hot-plug functionality, the transceiver module supports online insertion and replacement. It allows equipment maintenance without powering down devices, effectively cutting network service downtime.

Q4: Can this 1000BASE-ZX transceiver run on non-Ethernet networks?

A: Not applicable. This long-haul transceiver module is professionally calibrated for gigabit Ethernet transmission only. It does not support Fibre Channel, CPRI or SDH protocols to prevent network protocol conflicts and link failures.

Q5: Is this Brocade compatible transceiver suitable for multi-vendor network environments?

A: Fully MSA-compliant, this transceiver module features universal compatibility. It achieves stable interconnection with mainstream brand network devices, solving adaptation problems for mixed-brand network architectures.

Q6: Can the transceiver module code be rewritten for new network hardware?

A: We offer free EEPROM recoding and firmware customization. You can reconfigure module parameters to match updated or newly replaced network hardware, eliminating cross-device compatibility barriers.

Q7: How to fix unstable long-distance links caused by laser power drift?

A: Every Brocade compatible transceiver module undergoes rigorous high-temperature aging and laser calibration. Stable laser output effectively suppresses wavelength drift, solving long-span network jitter and random packet loss issues.

Q8: How to resolve optical power saturation for short-distance 80km module deployment?

A: For links shorter than 20km, match a 5-7dB optical attenuator. It balances excessive transmit power, avoids signal saturation and bit errors, and protects the transceiver laser from damage.

Q9: What connector and fiber does Brocade E1MG-LHA transceiver adopt?

A: This long-haul transceiver adopts duplex LC UPC interface, paired with standard G.652 single-mode fiber. It minimizes transmission loss and ensures reliable 80km long-distance network transmission.

Q10: Why cannot use APC fiber jumpers for this 80km transceiver module?
A: The module is optimized for UPC end-face specifications. APC jumpers cause severe signal reflection and extra attenuation, easily triggering unstable links and data errors in long-haul transmission scenarios.

Q11: Are protective accessories included for bulk Brocade transceiver orders?
A: Yes. All bulk and sample transceiver modules come with standard port dust caps. They effectively protect optical ports from dust, scratches and contamination during delivery and storage.
Q12: What is the correct way to clean transceiver optical ports?
A: Always use professional fiber cleaning sticks for LC port maintenance. Ordinary wipes leave residues or scratch laser surfaces, leading to increased attenuation and intermittent network failures.

Q13: Is industrial temperature customization available for Brocade long-haul transceivers?
A: Standard modules support 0℃~70℃ commercial scenarios. We provide customized industrial-grade modules that adapt to extreme high and low temperatures for outdoor and harsh industrial networking.

Q14: Do temperature fluctuations affect 1550nm 80km transceiver performance?
A: Our calibrated laser components control wavelength drift within standard ranges under variable temperatures. The transceiver module maintains consistent optical power and stable long-distance transmission all year round.

Q15: Do high-power 80km transceivers have overheating risks?

A: Adopting optimized internal heat dissipation structure, these high-power transceiver modules release heat efficiently. They operate stably without overheating even in high-density rack deployment scenarios.

Packaging Options & Custom‑Packaging Solutions

Every transceiver module gets reliable ESD‑safe packaging out of the box. Standard packing is ready for immediate shipment, while custom‑printed packaging with your logo is available for bulk orders.


Why Network Engineers Choose HYTOPTODEVICE
 

HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.

  • 100% MSA-compliant modules with Cisco, Huawei,Dell,Juniper, and Arista compatibility
  • ISO 9001:2015 certified manufacturing facility in Shenzhen
  • Average lead time of 3–5 business days with DHL/FedEx express options
  • Dedicated pre-sales engineering support for custom configurations
  • Actual hardware,actual switches,actual results.we publish compatibility test video,eliminate compatibility anxiety. you can watch before you buy. 
  • We can provide inspection and shipping videos to make you feel as if you are right here with the product.


"We replaced 200 Cisco-branded SFPs with HYTOPTODEVICE equivalents across our spine layer — zero compatibility issues, 40% cost reduction."— Network Architect, Tier-2 ISP, Germany


Quality Certification & Compliance

 At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final inspection, our processes ensure global compliance and reliability.

We adhere to rigorous standards for our SFP modules and network solutions:

  • ISO 9001: Certified quality management and production consistency.

  • CE & FCC: Fully compliant for seamless Global Market Access.

  • RoHS: Committed to environmental responsibility and hazardous material control.

  • Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.

Certified Quality. Global Standards. Guaranteed Performance.




Rigorous Industrial Product Testing

   

100% 3rd Party Compatible

Partial Test Demonstration

  • Brocade E1MG-LHA Compatible 1000BASE-ZX Transceiver Module | SFP 1550nm 80km SMF Bulk Wholesale | HYTOPTODEVICE
  • Brocade E1MG-LHA compatible transceiver module from hytoptodevice
  • 1000BASE-ZX 80km SMF SFP transceiver module
  • 1550nm long range gigabit transceiver module from hytoptodevice
  • buy affordable Brocade compatible transceiver module

Download