| NO. | Brand | Compatible P/N | Transceiver Type |
| 1 | Cisco | GLC-T | SFP-GE-T |
| 2 | Alcatel-Lucent | SFP-GIG-T | SFP-GE-T-I |
| 3 | Brocade | E1MG-TX | 10/100/1000BASE-T |
| 4 | Cisco Meraki | MA-SFP-1GB-TX | SFP-10G-T-30 |
| 5 | Huawei | SFP-1000BaseT | SFP-10G-T-30I |
| 6 | IBM | 00FE333 | SFP-10G-T-80 |
| 7 | Juniper Networks | JX-SFP-1GE-T | SFP-10G-T-100 |
| 8 | HPE | JD089A | |
| 9 | HPE Procurve | J8177B | |
| 10 | Palo Alto Networks | PAN-SFP-CG | |
| 11 | Ruijie | MINI-GBIC-GT |
Product Overview
HYTOPTODEVICE Alcatel-lucent SFP-GIG-T compatible RJ-45 copper SFP transceiver module delivers stable 1000BASE-T gigabit Ethernet transmission over twisted-pair copper cabling. This hot-swappable SFP copper module with RJ45 connector supports up to 100-meter links for Alcatel-Lucent OmniSwitch enterprise switch deployments. Built to IEEE 802.3ab and SFP MSA standards, pre-flashed SFP-GIG-T EEPROM enables plug-and-play recognition under Alcatel-Lucent OS without unsupported transceiver warning logs. This RJ-45 copper SFP transceiver module is pure gigabit, only works at 1000Mbps, and cannot fall back to 10/100Mbps speeds. HYTOPTODEVICE manufactures this RJ-45 copper SFP transceiver module for network distributors, system integrators and bulk buyers.
Key Technical Specifications
| Alcatel-lucent Compatible | SFP-GIG-T | Vendor Name | HYTOPTODEVICE |
| Form Factor | SFP | Data Rate | 1000Mbps |
| Connector | RJ-45 | Cable Distance | 100m |
| Media | Copper | Cable Type | Cat 5e/6/6a (UTP) |
| Max. Power Consumption | ≤1.2W | DDM Support | YES |
| Protocols | MSA Compliant, IEEE STD 802.3 and 802.3ab | Operation Temperature | 0 to 70°C (32 to 158°F) |
Standard: Cat5e or Cat6 twisted-pair cable is required to achieve full 100-meter Gigabit performance.
Note: Standard Cat5 cable may limit link stability at full 1G speed and is not recommended.
Live Insertion: The SFP RJ45 transceiver supports live insertion and removal.
Precaution: Avoid repeated hot swapping under continuous heavy traffic loads to ensure optimal hardware longevity.
Heat Dissipation: This 1Gbps copper module generates mild heat during operation.
Deployment Advice: Verify the switch thermal budget and ensure adequate ventilation before fully populating all SFP ports.
Fixed Rate: This RJ45 transceiver operates at a fixed 1000Mbps speed only.
Compatibility Warning: It cannot auto-negotiate down to 100Mbps or 10Mbps. The connected peer device must support 1G speed to successfully establish a link.
Storage Environment: Keep unused transceivers stored in dry, ESD-safe packaging.
Dust Protection: Always fit dust caps onto the RJ45 port when the module is not in service.
Built on SFP MSA and IEEE industry standards, this RJ45 SFP Transceiver module also works with Fortinet, Dell, Extreme and other mainstream network hardware, suitable for mixed-brand enterprise and campus network renovation projects.
The Core Features
FAQ
Q1: How will 1000BASE-T copper links perform when handling heavy traffic from many concurrent network users?
A: 1000BASE-T uses CSMA/CD and Ethernet flow control to ease congestion under multi-user workloads. HYTOPTODEVICE Alcatel-lucent SFP-GIG-T compatible RJ-45 copper SFP transceiver module works alongside OmniSwitch QoS queues to prioritize critical business data. When per-port traffic exceeds the 1Gbps limit, packets enter buffer storage and latency rises slightly. Correct QoS configuration on Alcatel-Lucent OS helps minimize packet drops within busy campus LAN environments.
Q2: Is STP shielded cabling mandatory, or can standard UTP cables run my 1000BASE-T copper connections?
A: Standard Cat5e/Cat6 UTP delivers reliable performance for most indoor enterprise deployments. This HYTOPTODEVICE RJ-45 copper SFP transceiver module meets IEEE 1000BASE-T requirements over regular unshielded twisted pair. STP cabling is only needed near strong EMI sources such as power distribution cabinets to reduce electromagnetic interference and stop intermittent link drops.
Q3: Do temperature and humidity variations inside ceiling plenum spaces degrade the performance of 1000BASE-T copper cabling?
A: Extreme temperature swings and high humidity slowly degrade cable properties, while typical indoor ceiling conditions create minimal adverse impact. HYTOPTODEVICE 1000BASE-T copper SFP transceiver maintains stable links within its 0~70°C operating temperature range. Excess moisture trapped inside cable conduits can damage cable insulation and trigger random link faults, so sufficient ventilation for cable pathways is recommended.
Q4: What key advantages make 1000BASE-T a better option compared with newer multi-gigabit copper standards including 2.5G and 10G?
A: 1000BASE-T balances cost and compatibility perfectly for existing Cat5e cabling infrastructure. Our HYTOPTODEVICE Alcatel-lucent SFP-GIG-T compatible RJ-45 copper SFP transceiver module operates on widely deployed Cat5e wiring without expensive recabling work. 2.5G/10G copper requires higher-grade cables and costly hardware; 1G works great for campus, surveillance and office LANs where 1G bandwidth fully satisfies business demands.
Q5: Do 1000BASE-T managed switches consume high volumes of electricity during regular operation?
A: No, 1000BASE-T copper ports feature relatively low power consumption. Each HYTOPTODEVICE RJ-45 copper SFP transceiver module consumes roughly 1.2W only. Compared with multi-gigabit copper ports, 1000BASE-T hardware cuts total rack power draw and helps enterprise customers lower recurring electricity expenses.
Q6: Is the extra investment for enterprise-class 1000BASE-T switches worthwhile compared with low-cost unmanaged consumer switches?
A: Yes, enterprise managed switches provide dependable long-term operation for business-critical networks. When paired with HYTOPTODEVICE Alcatel-lucent SFP-GIG-T compatible RJ-45 copper SFP transceiver module, Alcatel-Lucent OmniSwitch supports VLAN, QoS and link diagnostics. Consumer switches lack enterprise management functions and fail rapidly under 24/7 heavy loads, bringing costly business downtime risks.
Q7: What rate of hardware failures can I expect for 1000BASE-T NICs and switch copper ports in daily operation?
A: Using high-quality components, failure rates stay low under normal indoor operating environments. HYTOPTODEVICE copper SFP transceiver modules undergo full burn-in testing before shipment to reduce early failure risks. Most port failures result from static discharge, cable damage or overheating rather than inherent defects within the 1000BASE-T standard. ESD protection and temperature control can greatly extend hardware service lifespan.
Q8: Are USB 1000BASE-T Ethernet adapters capable of matching the performance of native PCIe server network interface cards?
A: No, PCIe NICs deliver more stable and consistent performance. HYTOPTODEVICE RJ-45 copper SFP transceiver module connects directly with Alcatel-Lucent OmniSwitch SFP ports via PCIe server NIC to build low-latency stable links. USB gigabit adapters share USB bus bandwidth, leading to higher latency and occasional packet loss during large file transfer tasks.
Q9: Can 1000BASE-T switch ports transmit PoE power over the same copper wire to supply IP cameras and VoIP phones?
A: The 1000BASE-T data standard supports PoE transport, yet PoE power delivery depends entirely on switch hardware instead of HYTOPTODEVICE RJ-45 copper SFP transceiver module. This copper SFP module only handles 1G data transmission. If your Alcatel-Lucent switch port supports PoE, it can deliver power to IP cameras and VoIP phones over the same Cat5e/Cat6 copper wiring.
Q10: How convenient is it to expand a 1000BASE-T LAN when your organization’s network grows?
A: Yes, expanding a 1000BASE-T network is flexible and simple. HYTOPTODEVICE Alcatel-lucent SFP-GIG-T compatible RJ-45 copper SFP transceiver module fills unused SFP slots on existing OmniSwitch hardware to add extra gigabit RJ45 ports. This mature standard supports switch daisy-chaining or new access switch deployment, allowing businesses to add LAN ports incrementally without replacing existing cabling infrastructure.
Q11: Can 1000BASE-T copper links connect seamlessly to existing fiber backbone network infrastructure?
A: Yes, smooth integration is achievable. HYTOPTODEVICE 1000BASE-T copper SFP transceiver modules serve as access-layer RJ45 ports, while fiber SFP transceivers connect to the core fiber backbone on the same Alcatel-Lucent switch. This architecture allows copper edge devices like PCs and cameras to communicate across long-distance single-mode or multi-mode fiber backbones without complex network redesign work.
Q12: Can 1000BASE-T LAN infrastructure support 802.1X port authentication for network access control policies?
A: 1000BASE-T supports 802.1X authentication; this security feature runs on the host Alcatel-Lucent switch firmware. When inserted inside OmniSwitch, HYTOPTODEVICE RJ-45 copper SFP transceiver module carries 802.1X authentication traffic normally. You can enforce port-level security rules and block unauthorized devices from accessing the 1G copper LAN.
Q13: What impact will a single power supply failure create on network traffic for a 1000BASE-T managed switch?
A: Without redundant power supplies, the entire switch will power off and drop all links including connections using HYTOPTODEVICE RJ-45 copper SFP transceiver module. Enterprise Alcatel-Lucent switches fitted with dual power supplies avoid downtime triggered by one faulty PSU. For critical business segments, deploy redundant power supplies and redundant uplinks to contain failure impact on the 1000BASE-T LAN.
Q14: How can network engineers leverage port mirroring on Alcatel-Lucent 1000BASE-T switches to examine live network traffic?
A: Port mirroring copies data packets from selected source ports to a dedicated monitoring port on the switch. The HYTOPTODEVICE RJ-45 copper SFP transceiver module supports transmission of mirrored 1000BASE-T traffic. Network engineers can attach packet analyzers to the mirror port, inspect packets, locate performance bottlenecks or identify threats without disrupting normal data transmission on production ports.
Q15: Will combining different brands of 1000BASE-T switches and NICs lead to interoperability troubles?
A: Interoperability remains reliable when all hardware follows IEEE 802.3ab specifications. HYTOPTODEVICE Alcatel-lucent SFP-GIG-T compatible RJ-45 copper SFP transceiver module complies with MSA and IEEE standards to operate across multi-brand network hardware. Rare firmware-related transceiver detection alerts may pop up; HYTOPTODEVICE can customize EEPROM coding to eliminate these warning messages for mixed-brand deployments.
Packaging & Custom OEM Solutions
ESD Protection & Fast Shipping: Every module is sealed in an ESD-safe bag and ready for same-day dispatch from stock.
Custom OEM & Branding: We provide logo printing, private labeling, and custom packaging to help distributors and integrators build their brand—no factory investment required.
Why Network Engineers Choose HYTOPTODEVICE
HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia
Quality Certification & Compliance
At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.
We adhere to rigorous standards for our SFP modules and network solutions:
ISO 9001: Certified quality management and production consistency.
CE & FCC: Fully compliant for seamless Global Market Access.
RoHS: Committed to environmental responsibility and hazardous material control.
Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.
Certified Quality. Global Standards. Guaranteed Performance.
