Extreme 10GB-BX40-D Compatible BiDi SFP+ 10G Transceiver 10GBASE-BX40-D (SMF, 1330nm-TX/1270nm-RX, 40km, Simplex LC, DDM)
Product Overview
Our HYTOPTODEVICE Extreme 10GB-BX40-D Compatible BiDi SFP+ 10G Transceiver is a long-range 10GBASE-BX40 uplink transceiver, built for 40km point-to-point transmission over single strand OS2 single mode fiber.
• Wavelength: Tx1330nm/Rx1270nm (Match Extreme 10GB-BX40-U standard BiDi pairing)
• Interface: Standard LC simplex connector
• Transmission Distance: Stable 40km @10Gbps SMF OS2
Compliant with Hot-Pluggable SFP+ MSA, SFF-8472,SFP-8431, IEEE 802.3ae and RoHS standards and fully DDM/DOM support, Delivering high-speed performance with optimized power efficiency, this DDM supported BiDi SFP+ 10G Transceive is the ideal solution for cross-campus backbones, metropolitan area network (MAN) rings, and long-range data center interconnects (DCI). We support samples, bulk wholesale and OEM private labeling, submit bulk inquiry or RFQ for competitive pricing and long-term supply contracts.
Key Technical Specifications
| Extreme compatible |
10GB-BX40-D |
Vendor Name |
HYTOPTODEVICE |
| Form Factor |
SFP+ |
Max Data Rate |
10.7Gbps |
| Wavelength |
TX1330nm/RX1270nm |
Max Distance |
40km |
| Connector |
Simplex LC |
Transmitter Type |
1330nm DFB |
| Cable Type |
SMF |
Receiver Type |
PIN |
| TX Power |
-1.0~+5dBm |
Receiver Sensitivity |
< -15dBm |
| Max. Power Consumption |
≤1W |
DOM/DDM |
Fully Supported |
| Protocols |
SFP+ MSA, SFF-8472, IEEE 802.3ae, RoHS Compliant |
Operation Temperature |
0 to 70°C (32 to 158°F) |
For detailed technical specifications, please refer to the Datasheet
Usage Guidelines & Operational Best Practices
• BiDi Pairing Rule: SFP‑10G‑BXD (Tx1330/Rx1270) must pair with
SFP‑10G‑BXU (Tx1270/Rx1330) at remote end. Two BXD modules will NOT form a valid link.
• Cabling Requirement: Use OS2 single‑mode simplex‑LC UPC cables only. Multimode fiber / APC connectors reduce reach and cause link issues; keep connectors clean.
• Port Notice: Install only into standard SFP+ ports. Do not force into 1G‑SFP slots. Disable transceiver‑block policy if needed on host devices.
• Environment: Run within 0‑70 °C. Avoid high‑heat, dusty, poorly ventilated rack positions.
• Hot‑swap: Supports hot‑swap; disconnect fiber before plugging / unplugging to protect optical ports.
• DDM Monitoring: Enable DDM/DOM; monitor optical power and temperature for early fault warning.
• Pre‑test Recommendation: Test sample units with real hardware before large‑scale bulk deployment.
• Laser Safety: Avoid direct eye exposure to powered optical ports; infrared laser can harm eyes.
For detailed operation instructions, please refer to the User Guide.
Full Compatibility List & Supported Network Hardware
1.Extreme Native Compatibility
This HYTOPTODEVICE BiDi SFP+ 10G Transceiver requires no manual CLI configuration or firmware upgrade, achieving zero-configuration online operation on mainstream Extreme Networks hardware. Verified compatible Extreme device models are listed line by line below:
1. Extreme X440 Series Access Switches
X440-G2-24t-10GE4, X440-G2-48t-10GE4, X440-G2-24p-10GE4
2. Extreme X460 Series Aggregation Switches
X460-G2-24p-10GE4, X460-G2-48p-10GE4
3. Extreme X670 / X870 Series Data Center Core Switches
X670-G2-48x-4q, X870-48x-8c high-density 10G core switching chassis
4. Extreme VSP Series Virtual Service Platform Routers
VSP 4900, VSP 8400 enterprise multi-service core routers with standard SFP+ expansion slots
2.Multi-Brand Cross Compatibility
Built to universal SFP+ MSA standards, HYTOPTODEVICE’s Extreme-compatible BiDi SFP+ 10G 40KM Transceiver unlocks OEM vendor lock-in for hybrid multi-vendor metro networks.
- Open-Brand (Plug-and-Play): Fortinet, Ubiquiti, MikroTik, D-Link, Zyxel and other open switches
- Locked-Brand (Custom Coding): Cisco, H3C, Huawei, Dell, Juniper, Ruijie, fully compatible with latest Ciena OS firmware
3.Free Custom EEPROM Re-Flash Service
Complimentary permanent EEPROM rewrite for all bulk orders of SFP+ 10G BiDi 40KM Transceiver. Upgrade Extreme system or migrate modules to other brand racks; our team re-codes firmware free of charge to maintain stable 40km single-fiber bidirectional links for evolving multi-vendor metro architectures.
Primary Application Scenarios
Versatile commercial BiDi SFP+ 10G Transceiver optimized for cost-saving single-fiber long-range 10G networking for enterprise, park and ISP service scenarios.
1. Extreme switch long-distance 10G uplink deployment, saving fiber core resources with single-strand BiDi SFP+ 10G Transceiver
2. Cross-building enterprise campus 40km 10G interconnection using high-stability BiDi SFP+ 10G Transceiver
3. Outdoor cabinet long-range 10G signal transmission for commercial parks with reliable BiDi SFP+ 10G Transceiver
4. ISP last-mile broadband access and remote base station 10G networking with economical BiDi SFP+ 10G Transceiver
5. Enterprise 10G structured cabling optimization, cutting project costs via single-fiber BiDi SFP+ 10G Transceiver deployment
Connectivity Solutions(Applications)
1.Switch-to-Switch 10G BiDi Single Fiber Uplink

2.Switch-to-10G SFP+ NIC Server Long Distance Link

3.Enterprise 10G Single Fiber Structured Cabling System Layout

The Core Features
1.50% Fiber Resource Saving & Low-Cost Network Upgrade
Optimize your current network infrastructure without the high cost of laying new cables. By transmitting and receiving signals over a single strand of fiber, our 10G BiDi SFP+ transceivers help you squeeze maximum value out of your existing fiber cabling.

2.Double Your Network Capacity Instantly
Upgrade your bandwidth effortlessly. Utilizing advanced Wavelength Division Multiplexing (WDM) technology, this module allows bidirectional traffic over a single fiber strand, effectively doubling your network capacity instantly while cutting cabling costs in half.

3.Energy-Efficient 10G Connectivity for Data Centers
Designed for high-density, high-speed modern data centers, this SFP+ transceiver features an ultra-low power consumption of just 1W. Achieve stable, green, and cost-effective 10G data transmission while significantly reducing operational cooling costs.

4.Seamless Cross-Brand Interoperability
Enjoy worry-free integration into your multi-vendor environment. Every single unit undergoes rigorous compatibility testing on original brand switches to ensure seamless cross-brand interoperability. Real products, real switches, real results—Specific Compatibility Video available upon request.

5.Comprehensive Testing for Rock-Solid Reliability
Reliability is our cornerstone. From signal integrity and distance runs to extreme temperature cycles, our comprehensive testing procedure guarantees that every 10G BiDi 40km SFP+ module delivers stable, packet-loss-free performance under any network load before leaving our Test Center.

FAQ
Q1: How can I organize port records for BiDi transceivers within dense patch panels without messy asset files?
A: Conventional dual-fiber cable filing templates cannot match single-port alternating transmit and receive wavelength layout of BiDi hardware, which brings heavy labeling workload for cabinet management. HYTOPTODEVICE clearly marked BiDi SFP+ 10G Transceiver simplifies port registration for high-density structured cabling deployment.
Q2: What triggers random packet loss on BiDi links that maintained stable transmission in the previous year?
A: Long-term fiber displacement, aging and micro-bending will steadily raise signal attenuation. 40km BiDi optics adopt compact optical power budget with almost no spare capacity to offset gradual fiber performance degradation. HYTOPTODEVICE power-margin enhanced BiDi SFP+ 10G Transceiver adapts to long-running fiber infrastructure aging scenarios.
Q3: Why do continuous bit errors appear while real-time optical power values stay within normal thresholds on 40km BiDi links?
A: Long-distance single-mode transmission builds up chromatic dispersion across 1270nm and 1330nm wavebands, distorting 10G signal waveforms invisibly. Reliable luminous intensity cannot counteract waveform distortion to eliminate BER faults. HYTOPTODEVICE dispersion optimized BiDi SFP+ 10G Transceiver stabilizes signal quality for long-span backbone transmission.
Q4: Will minor dirt on bulkhead adapters trigger full service outage of 40km single-fiber BiDi connections?
A: Tiny dust residue on fiber end faces creates two-way interference on single-strand BiDi links. Besides weakening light intensity, contaminants reflect local transmitting signals back into the built-in receiver and disable normal signal demodulation. HYTOPTODEVICE anti-reflection port BiDi SFP+ 10G Transceiver lowers outage risks caused by uncleaned fiber interfaces.
Q5: Which factor leads to frequent crosstalk faults inside Extreme switch cabinets loaded with BiDi modules?
A: Budget generic BiDi transceivers equip diplexer components with insufficient isolation performance. Internal laser transmitting signals leak into nearby receiving circuits and generate persistent chassis crosstalk alarms. HYTOPTODEVICE high-isolation diplexer BiDi SFP+ 10G Transceiver erases internal signal leakage for full-density switch port installation.
Q6: Why do data center cooling expenses surge after upgrading long-distance links to 40km BiDi transceivers?
A: 40km long-reach BiDi modules adopt high-output laser chips that generate extra heat during continuous operation. Mass deployment raises overall thermal load and pushes HVAC cooling systems to run at higher power consumption. HYTOPTODEVICE low thermal emission BiDi SFP+ 10G Transceiver cuts overall heat burden to reduce data center cooling costs.
Q7: Why cannot ordinary single-mode loopback jumpers complete functional verification for BiDi SFP+ ports?
A: BiDi hardware separates transmit and receive traffic onto two independent wavelengths. Standard loopback lines short-circuit local TX and RX ports directly, failing to match the dual-wavelength working logic of BiDi modules. HYTOPTODEVICE dual-wavelength separated BiDi SFP+ 10G Transceiver needs dedicated testing tools for accurate port performance inspection.
Q8: Why does DDM real-time optical monitoring fail to display data after Extreme switch firmware upgrades?
A: OS version updates adjust the system’s register reading mechanism for pluggable transceivers. Most third-party BiDi optics use non-standard register layouts, leading to incomplete or garbled diagnostic telemetry after firmware iterations. HYTOPTODEVICE full register compatible BiDi SFP+ 10G Transceiver retains complete DDM functions across all official switch OS versions.
Q9: Why do field maintenance crews need to carry two sets of spare BiDi hardware for on-site repair work?
A: Single-fiber BiDi links require matched TX1270 and TX1330 module pairs to achieve bidirectional communication. Carrying only one wavelength variant cannot resolve unexpected transceiver breakdowns on site. HYTOPTODEVICE pre-paired BiDi SFP+ 10G Transceiver sets standardize spare inventory management for field service teams.
Q10: What causes repeated delays during on-site commissioning of 40km BiDi fiber links?
A: Field engineers rely on habitual use of duplex dual-fiber jumpers for traditional network construction, while BiDi single-fiber links require dedicated simplex patch cords. Wrong cable selection leads to repeated debugging and postponed project delivery timelines. HYTOPTODEVICE usage-labeled BiDi SFP+ 10G Transceiver reduces wiring errors to speed up network turn-up progress.
Q11: Why do dark fiber operators charge extra rental fees for networks built with BiDi single-fiber transceivers?
A: BiDi modules occupy fixed exclusive wavelength pairs on each fiber core, limiting operators’ ability to multiplex multiple clients’ independent services over the same fiber strand. Reduced fiber resource utilization pushes carriers to set higher leasing prices for BiDi single-fiber circuits. HYTOPTODEVICE cost-efficient BiDi SFP+ 10G Transceiver helps enterprises cut long-term dark fiber rental expenditure.
Q12: Is it possible to deploy breakout cables to split a single 10G BiDi fiber link into multiple low-speed independent channels?
A: BiDi single-fiber transmission only supports one bidirectional 10G channel without native multiplex breakout capacity. Optical splitters or breakout cables will exhaust the tight power budget and terminate normal link operation. HYTOPTODEVICE single-channel fixed BiDi SFP+ 10G Transceiver is designed for point-to-point 10G single-fiber transmission only.
Packaging & Custom OEM Solutions
Each module ships individually sealed in ESD-safe packaging, protected from static from our warehouse to your shelf—and ready to ship on receipt of order. Volume buyers and system integrators also unlock our full OEM program: custom logos, private labeling, and branded packaging, all designed to help you build and protect your own brand.

Why Network Engineers Choose HYTOPTODEVICE
HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
- Up to 70% cost savings vs OEM, transparent pricing & flexible bulk rates, supported quality returns
- 100% real-device compatible with Cisco, Huawei,Dell,Juniper, and Arista
- ISO 9001:2015 Shenzhen factory, full lineup: 1.25G/10G/25G/40G/100G/200G/400G/800G/1.6T transceivers
- Ample stock, fast global DHL/FedEx shipping in 3–5 working days
- Free pre-sales engineering support for custom EEPROM & private label firmware
- Real switch test videos available for pre-purchase review; inspection & shipping videos provided per order
“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia
Quality Certification & Compliance
At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.
We adhere to rigorous standards for our SFP modules and network solutions:
-
ISO 9001: Certified quality management and production consistency.
-
CE & FCC: Fully compliant for seamless Global Market Access.
-
RoHS: Committed to environmental responsibility and hazardous material control.
-
Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.
Certified Quality. Global Standards. Guaranteed Performance.

Rigorous Industrial Product Testing

100% 3rd Party Compatible

Partial Test Demonstration

Others


