| NO. | Brand | Compatible P/N | Transceiver Type |
| 1 | Cisco | SFP-10G-T-30I | SFP-10G-T-30 |
| 2 | Arista Networks | SFP-10G-T-I | GLC-10G-T |
| 3 | Brocade | 10G-SFPP-T-I | SFP-10G-T-80 |
| 4 | HPE BladeSystem | 813874-B21-I | SFP-10G-T-100 |
| 5 | Juniper Networks | EX-SFP-10GE-T-I | SFP-G-T |
| 6 | H3C | SFP-XG-T-I | SFP-G-T-I |
| 7 | Extreme Networks | 10338-I | 10/100/1000BASE-T |
| 8 | Ubiquiti | UF-RJ45-10G-I | |
| 9 | NVIDIA/Mellanox | MFM1T02A-T-I |
| Cisco Compatible | SFP-10G-T-S-I | Vendor Name | HYTOPTODEVICE |
| Form Factor | SFP+ | Data Rate | 10Gbps, 5Gbps, 2.5Gbps, |
| Connector | RJ-45 | Cable Distance | 30m |
| Media | Copper | Cable Type | Cat6a/Cat7 |
| Max. Power Consumption | ≤2.5W | DDM Support | YES |
| Protocols | IEEE 802.3an, IEEE 802.3az, SFP+ MSA, SFF-8431 | Operation Temperature | -40 to 85°C (-40 to 185°F) |
Standardized installation and maintenance procedures can extend the service life of SFP-10G-T modules and significantly reduce long-term operational costs (TCO) for enterprise and industrial customers ordering in bulk.
Cable Compatibility Guidelines: To achieve full 30-meter 10G transmission, high-quality Cat 6a or Cat 7 twisted-pair cables must be used. Cat 5e cables are restricted to 1G speeds and will experience severe crosstalk if operated at 10G rates.
Deployment & Thermal Management Designed for harsh environments, this industrial module operates reliably in sealed enclosures (-40°C to 85°C). Due to the inherent heat output of 10GBASE-T technology, follow these thermal best practices:
Port Spacing: Avoid populating adjacent ports continuously. Stagger modules with empty spaces between them to prevent heat accumulation.
Airflow: Ensure host equipment provides adequate overall heat dissipation.
EMI Protection & Wiring: When routing cables near high-voltage power lines or heavy motor equipment (e.g., PLCs), always select fully shielded (STP/FTP) Cat 6a cabling to mitigate Electromagnetic Interference (EMI) and prevent packet loss.
Leveraging Built-In Diagnostics: Network engineers can run native CLI diagnostic commands on compatible switches (e.g., Cisco) to trigger the module’s built-in cable test function, rapidly pinpointing wiring faults without requiring external field testers.
Hot-Swapping Compliance: Fully compliant with SFP+ hot-plugging standards, modules can be inserted or removed while the host switch remains powered on and running, ensuring zero disruption to neighboring network links.
Storage & Bulk Inventory Support: Unused modules should be stored in a dry, climate-controlled warehouse. We maintain a robust finished-goods inventory to guarantee rapid global shipping for wholesale and high-volume orders.
Full Compatibility List & Supported Devices
1.Validated Cisco Hardware & Firmware This industrial-grade SFP-10G-T copper transceiver features Cisco-compatible EEPROM coding to ensure seamless plug-and-play recognition without unsupported transceiver warnings under Cisco IOS. Every unit undergoes rigorous burn-in and wide-temperature testing (-40°C to 85°C) before shipment:
• Catalyst Switches: C9300, C9400, C9500, C3850 series
• Nexus Switches: N9K C93180YC, C93240YC series
• Any Cisco hardware fitted with standard SFP+ ports supporting 10GBASE-T
2.Multi‑Brand Cross Interoperability
Built on MSA open standards, this industrial 10GBASE-T SFP+ transceiver also works with Arista, Juniper, Dell, Brocade and other mainstream network brands, flexible for multi-vendor pure Ethernet network upgrade projects. Not applicable for FCoE storage networking.
3.Value-Added Services
HYTOPTODEVICE provides free EEPROM custom programming, pre-sales technical consultation, test sample support, custom labeling and packaging services for wholesalers, integrators and bulk buyers working on cost-sensitive 10G Ethernet deployments.
Connectivity Solutions(Applications)
1.10G to 10G Switch to Switch Interconnection
Q1: Is this Cisco compatible industrial SFP+ copper transceiver suitable for cost-sensitive pure 10G Ethernet projects?
A: Yes, this module is purpose-built for cost-sensitive pure 10G Ethernet links. It cuts unnecessary cost for Ethernet-only deployments. Note that it only handles Ethernet traffic and cannot support FCoE for storage networking. HYTOPTODEVICE offers bulk pricing for integrators and wholesalers for such Ethernet projects.
Q2: Does this SFP-10G-T-S-I industrial transceiver support FCoE protocol for storage area network applications?
A: No. This module is designed for Ethernet‑only operation and does not support FCoE. It works well for regular 10G Ethernet connections, but users should select other transceivers if FCoE storage transmission is required.
Q3: What copper cable grade is required to reach the full 30m 10GBASE-T link for this cost-sensitive 10G Ethernet SFP+ module?
A: Yes, Cat6a or Cat7 shielded twisted pair cable is mandatory for full 30-meter 10G operation. Cat5e can only support up to 1Gbps, not 10G. HYTOPTODEVICE buyers should select proper cabling to avoid link drop issues in industrial cabinet deployments.
Q4: Can this industrial SFP-10G-T module automatically negotiate down to lower Ethernet speeds for legacy network hardware?
A: Yes, it supports multi-rate auto-negotiation including 10G,5G,2.5G,1G and 100Mbps. The PHY will match the connected RJ45 device speed automatically, which helps integrators mix new 10G equipment and old gigabit infrastructure in pure Ethernet networks.
Q5: Will high operating temperature at +85℃ cause link drop or unstable 10G copper transmission?
A: No, this HYTOPTODEVICE I-temp transceiver maintains valid 10G link up to +85℃. Each unit passes 3-temperature burn-in test from -40℃ to 85℃. But users must guarantee proper airflow inside industrial cabinet to avoid accumulated overheating.
Q6: Does the customized EEPROM on this SFP-10G-T-S-I module eliminate Cisco unsupported transceiver warning messages?
A: Yes. Preloaded Cisco compatible EEPROM coding prevents "unsupported transceiver" system logs on Cisco IOS switches. Every module is validated on Cisco hardware before delivery for wholesalers and bulk buyers.
Q7: Is live hot-plugging safe for this industrial 10GBASE-T copper transceiver during running pure Ethernet network operation?
A: Yes, it follows SFP+ MSA hot-swap specification. However, repeated frequent hot insertion in high-temperature industrial environments may shorten service life. We recommend power-down replacement for critical production Ethernet links.
Q8: What level of ESD protection is built-in for the electrical connector of this SFP+ copper transceiver?
A: This HYTOPTODEVICE industrial module is built with robust ESD protection on the SFP+ edge connector. Always use anti-static wristband when handling modules, especially inside dry industrial control rooms with high static risk.
Q9: Does this 10GBASE-T SFP+ module support DDM digital diagnostic monitoring on Cisco host switches?
A: Yes, DDM/DOM function is fully enabled. Network administrators can read real-time module temperature, supply voltage and link status from Cisco switch CLI, convenient for remote network maintenance for system integrators.
Q10: Can I fully fill all SFP+ slots of my Cisco Catalyst switch with these 10GBASE-T copper modules for my cost-sensitive 10G Ethernet network?
A: Not always recommended. Copper 10G PHY consumes more power and generates more heat. Check your switch thermal and power budget first. Over-population may trigger port shutdown or over-temperature alarms in dense rack deployment.
Q11: Can HYTOPTODEVICE provide test samples and shorten lead time for bulk orders of this Cisco compatible industrial 10G copper transceiver for pure Ethernet links?
A: Yes, sample evaluation is available for buyers. HYTOPTODEVICE factory maintains stock for this SFP-10G-T-S-I compatible module, offering competitive lead time and flexible MOQ for distributors and system integrators on cost-sensitive 10G Ethernet deployments.
Q12: Does this SFP-10G-T-S-I industrial transceiver comply with RoHS and CE standards for global industrial Ethernet projects?
A: Yes, this HYTOPTODEVICE 10GBASE-T copper module meets RoHS, CE and FCC certification. All production batches pass compliance inspection, suitable for export bulk wholesale to worldwide industrial pure Ethernet network projects.
Packaging & Custom OEM Solutions
ESD Protection & Fast Shipping: Every module is sealed in an ESD-safe bag and ready for same-day dispatch from stock.
Custom OEM & Branding: We provide logo printing, private labeling, and custom packaging to help distributors and integrators build their brand—no factory investment required.
Why Network Engineers Choose HYTOPTODEVICE
HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia
Quality Certification & Compliance
At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.
We adhere to rigorous standards for our SFP modules and network solutions:
ISO 9001: Certified quality management and production consistency.
CE & FCC: Fully compliant for seamless Global Market Access.
RoHS: Committed to environmental responsibility and hazardous material control.
Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.
Certified Quality. Global Standards. Guaranteed Performance.
