| NO. | Brand | Compatible P/N | Transceiver Type |
| 1 | Juniper | EX-SFP-10GE-BX32-60 | SFP-10G23-BX60 |
| 2 | Brocade | 10G-SFPP-BXD-60K | SFP-10G32-BX20 |
| 3 | Dell | GP-SFP-10GBX-D-60 | SFP-10G32-BX40 |
| 4 | Ciena | XCVR-S60U33 | SFP-10G54-BX80 |
| 5 | Extreme | 10GB-BX60-D | SFP-10G54-BX100 |
| Juniper Networks Compatible | EX-SFP-10GE-BX32-60 | Vendor Name | HYTOPTODEVICE |
| Form Factor | SFP+ | Max Data Rate | 10.7Gbps |
| Wavelength | TX1330nm/RX1270nm | Max Distance | 60km |
| Connector | Simplex LC | Transmitter Type | 1330nm DFB |
| Cable Type | SMF | Receiver Type | APD |
| TX Power | 1.0~+6dBm | Receiver Sensitivity | < -20dBm |
| Max. Power Consumption | ≤1.4W | DOM/DDM | Fully Supported |
| Protocols | SFP+ MSA, SFF-8472, IEEE 802.3ae, RoHS Compliant | Operation Temperature | 0 to 70°C (32 to 158°F) |
For detailed technical specifications, please refer to the Datasheet.
Usage Guidelines & Operational Best Practices
For detailed operation instructions, please refer to the User Guide.
Full Compatibility List & Supported Network Hardware
HYTOPTODEVICE custom-coded 10G BiDi SFP+ Transceiver 60km achieves 100% full compatibility with Juniper EX-SFP-10GE-BX32-60 and all Junos OS versions. All products pass real Juniper physical machine online testing, supporting plug-and-play identification, complete DDM real-time data display and zero port startup failure. We can provide official real-machine test videos and test reports for customer verification, completely solving compatibility hidden dangers of third-party modules for Juniper long-haul networking.
Built to universal SFP+ MSA standards, HYTOPTODEVICE’s Juniper-compatible 10G BiDi SFP+ transceiver 60KM unlocks OEM vendor lock-in for hybrid multi-vendor metro networks.
Complimentary permanent EEPROM rewrite for all bulk orders of 10G BiDi 10G SFP+ 60KM Transceiver. Upgrade Juniper OS or migrate modules to other brand racks; our team re-codes firmware free of charge to maintain stable 40km single-fiber bidirectional links for evolving multi-vendor metro architectures.
Primary Application Scenarios
HYTOPTODEVICE 10G BiDi SFP+ Transceiver 60km is a dedicated high-stability single-fiber long-haul optical module, widely applicable to multiple high-value enterprise network scenarios, and is the preferred replacement module for 60km long-distance single fiber network upgrading and reconstruction.

Optimize your current network infrastructure without the high cost of laying new cables. By transmitting and receiving signals over a single strand of fiber, our 10G BiDi SFP+ transceivers help you squeeze maximum value out of your existing fiber cabling.
Upgrade your bandwidth effortlessly. Utilizing advanced Wavelength Division Multiplexing (WDM) technology, this module allows bidirectional traffic over a single fiber strand, effectively doubling your network capacity instantly while cutting cabling costs in half.
Designed for high-density, high-speed modern data centers, this SFP+ transceiver features an ultra-low power consumption of just 1W. Achieve stable, green, and cost-effective 10G data transmission while significantly reducing operational cooling costs.
Enjoy worry-free integration into your multi-vendor environment. Every single unit undergoes rigorous compatibility testing on original brand switches to ensure seamless cross-brand interoperability. Real products, real switches, real results - Specific Compatibility Video available upon request.
Reliability is our cornerstone. From signal integrity and distance runs to extreme temperature cycles, our comprehensive testing procedure guarantees that every 10G BiDi 60km SFP+ module delivers stable, packet-loss-free performance under any network load before leaving our Test Center.
FAQ
Q1: Why cannot 10G BiDi SFP+ Transceiver 60km be directly integrated into standard CWDM and DWDM multiplexing networks?
A1: Unlike grid-tunable WDM optical modules that support flexible channel switching, Juniper-compatible 10G BiDi SFP+ Transceiver 60km adopts fixed 1270nm/1330nm internal wavelength design without adjustable frequency bands or standard WDM channel specifications. Its locked wavelength structure cannot match the precise channel spacing requirements of CWDM/DWDM multiplexer systems, making it unable to implement multi-waveband signal multiplexing and hybrid transmission in carrier WDM networking architectures.
Q2: Why do single-fiber BiDi deployments trigger frequent ODF port configuration errors on Juniper long-haul networks?
A2: Conventional network operation and maintenance workflows are built around dual-fiber TX/RX paired cabling logic, which is the habitual judgment standard for most field engineers. The 10G BiDi SFP+ Transceiver 60km only occupies a single fiber core to complete full-duplex transmission, eliminating the traditional dual-fiber pairing structure. When sorting ODF ports, staff often mistakenly pull out active neighboring live circuits while searching for the missing receive fiber, causing widespread labeling disorder and accidental service outages on Juniper campus and metro networks.
Q3: Why is on-site loopback verification extremely difficult for Juniper 10G BiDi SFP+ 60km single-fiber links?
A3: Traditional dual-fiber 10G modules support simple on-site loopback testing by physically connecting the transmit and receive ports with jumpers. However, the 10G BiDi SFP+ Transceiver 60km integrates both sending and receiving functions into one single fiber interface, with internal automatic signal transceiving switching. This structural design completely rules out basic physical loopback operation, leaving field technicians without a quick and effective means to verify port and link integrity during Juniper network deployment and troubleshooting.
Q4: What irreversible hardware damage risk do APD receivers face on 60km BiDi transceiver for Juniper links?
A4: The high-sensitivity APD receiving chip inside 10G BiDi SFP+ Transceiver 60km has extremely strict tolerance limits for input optical power and operating voltage. Sudden optical power surges from misoperation or instantaneous voltage fluctuations in Juniper equipment rooms can trigger avalanche breakdown of the APD component. This destructive failure is irreversible, directly burning out the receiving module and causing permanent scrapping of the long-haul BiDi transceiver.
Q5: How do extreme ambient temperature changes affect the stability of 60km long-span Juniper BiDi fiber links?
A5: Unattended outdoor telecom cabinets and field equipment rooms lack constant temperature control, bringing drastic seasonal temperature fluctuations. High-temperature environments in summer will reduce the laser luminous efficiency of 10G BiDi SFP+ Transceiver 60km and increase internal receiver noise. This creates a bizarre intermittent fault state where Juniper links operate stably at low night temperatures but suffer continuous frame loss and packet jitter during high-temperature daytime periods, which is difficult for routine monitoring to detect in advance.
Q6: How does legacy fiber PMD interference trigger hard-to-locate intermittent faults on Juniper 10G BiDi 60km links?
A6: Aged legacy G.652 fiber pipelines widely deployed in traditional network reconstruction projects have obvious Polarization Mode Dispersion characteristics. When optical signals of 10G BiDi SFP+ Transceiver 60km transmit over 60km ultra-long distances, PMD will stretch and deform optical pulses, resulting in completely irregular and non-reproducible random packet loss. This type of hidden intermittent fault has no fixed occurrence rules, becoming one of the most difficult troubleshooting problems for Juniper metro backbone network operation teams.
Q7: Why excessive patch panel cross-connections easily cause 60km BiDi link outage on Juniper networks?
A7: The optical power budget of 10G BiDi SFP+ Transceiver 60km is precisely calibrated for 60km long-distance transmission, with almost no redundant attenuation margin. Each additional patch panel adapter, fiber jumper and docking node will bring unavoidable insertion loss and optical reflection loss. In actual Juniper network deployment, adding merely two extra cross-connection points will fully exhaust the reserved optical power tolerance, directly leading to link instability or complete disconnection.
Q8: Why do third-party 60km BiDi modules trigger uncertified module alarms on Juniper switches?
A8: Mainstream enterprise-grade Juniper switching devices adopt strict OEM vendor lock-in authentication mechanisms. Most universal 10G BiDi SFP+ Transceiver 60km are third-party non-original modules; if the EEPROM authentication data, built-in cryptographic keys and factory calibration information are not perfectly adapted to Juniper’s official verification standards, the system will immediately identify uncertified hardware and forcibly block port activation, resulting in port failure and link setup failure.
Q9: Why is rate downgrade deployment of 10G BiDi transceivers on 25G/100G Juniper high-density ports unstable?
A9: New-generation high-density 25G/100G Juniper switch ports are optimized for multi-rate dual-fiber high-speed transmission architecture, with poor compatibility for single-fiber BiDi rate downgrade scenarios. These ports cannot stably lock 10G low-speed rate for 10G BiDi SFP+ Transceiver 60km; even if forced adaptation is successful, frequent clock synchronization abnormalities and signal flapping will occur, leading to continuous intermittent link failures and unable to support stable business transmission.
Q10: What operational risks result from mismatched industrial and commercial grade BiDi modules for outdoor Juniper deployments?
A10: Outdoor roadside and unattended communication cabinet scenarios require wide-temperature industrial-grade optical modules to adapt to extreme weather environments. Commercial-grade 10G BiDi SFP+ Transceiver 60km only supports 0°C~70°C working temperature and cannot withstand ultra-low temperature in winter and ultra-high temperature heat in summer. Improper replacement and deployment will cause frequent module crash reset, link flapping, and even permanent chip burnout in extreme temperatures, seriously threatening the stable operation of outdoor Juniper long-haul links.
Packaging & Custom OEM Solutions
Each module ships individually sealed in ESD-safe packaging, protected from static from our warehouse to your shelf - and ready to ship on receipt of order. Volume buyers and system integrators also unlock our full OEM program: custom logos, private labeling, and branded packaging, all designed to help you build and protect your own brand.
Why Network Engineers Choose HYTOPTODEVICE
HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks.” - Senior Network Engineer, Regional Telecom, Australia
Quality Certification & Compliance
At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.
We adhere to rigorous standards for our SFP modules and network solutions:
Certified Quality. Global Standards. Guaranteed Performance.

Partial Test Demonstration