| NO. | Brand | Compatible P/N | Remarks |
| 1 | Cisco | SFP-10G-T-80 | |
| 2 | Arista Networks | SFP-10GE-T80 | |
| 3 | Dell | GP-10GSFP-T80 | |
| 4 | Brocade | 10G-SFPP-T-80 | |
| 5 | H3C | SFP-XG-T-80 or SFP-XG80-T | |
| 6 | Intel | E10GSFPT80 | |
| 7 | Juniper | EX-SFP-10GE-T80 | |
| 8 | MikroTik | S+RJ8010 | |
| 9 | Palo Alto Networks | PAN-SFP-PLUS-T80 | |
| 10 | HW | SFP-10G-T-80 | |
| 11 | Aruba (HPE) | JL563B-80 OR JL563A-80 | |
| 12 | Ubiquiti (UBNT) | UACC-CM-RJ45-MG-80 | |
| 13 | HPE BladeSystem | 813874-B22 | |
| 14 | Generic | HYT-SFP-10G-T-B80 |
This Aruba compatible 10G copper SFP+ 80m distance transceiver is hardware-coded for seamless integration with:
Aruba CX Series: 6200, 6300, 6400, 8320, 8325, 8360 (Note: Port 1-12/17 restrictions apply on some 8320/8325 models).
Aruba 2930M / 3810M Series: Using 10G SFP+ uplink modules.
Aruba 5400R zl2 Series: Using v3 zl2 modules (e.g., J9986A, J9990A).
Aruba CX Core-to-Aggregation: Linking 8360 or 6300 switches across large campus floors where 30m copper limits are exceeded.
WiFi-6/6E Wireless Backhaul: A dedicated NBASE-T SFP+ module for WiFi-6 backhaul supporting 2.5G/5G/10G uplinks for Aruba 500/600 series APs.
JL563B-80 distance extension solution: Extending 10G network 80 meters without fiber using existing Cat6A 10G copper cabling in historic or difficult-to-wire buildings.
| Aruba Compatible | JL563A-80 | Vendor Name | HYTOPTODEVICE |
| Form Factor | SFP+ | Data Rate | 10Gbps |
| Cable Type | Cat6a/7 | Max Distance | 80m |
| Interface | RJ-45 | DDM Support | No |
| Max. Power Consumption | ≤2.5W | Media | Copper |
| Protocols | IEEE 802.3an, IEEE 802.3az, SFP+ MSA, SFF-8431 | Operation Temperature | 0 to 70°C (32 to 158°F) |
Standard 10GBASE-T transceivers generate high heat and signal noise, limiting them to 30 meters. The HYTOPTODEVICE Broadcom BCM84891 10G copper SFP+ 80m uses an improved Broadcom chip solution to lower power consumption to 2.0W–2.5W. This efficiency, combined with a high-performance PHY 10G copper module, allows for a reliable 10G RJ45 80 meter reach on Cat6A 10G lines.
No. This module is optimized for high-speed ArubaOS-CX environments. It is a multi-rate 2.5G 5G 10G copper SFP+ 80m transceiver. To maintain signal integrity at 80 meters, it does not support 100Mbps or 1Gbps legacy Ethernet speeds.
To achieve a stable 80 meter 10Gbps Ethernet over copper link, you must use Cat6A or Cat7 shielded cables. Standard Cat6 is not recommended for the Cat6A 10G distance limit of 80m, as it lacks the crosstalk protection needed for full 10G bandwidth.
Aruba switches often have high-density port layouts. Even with our improved thermal materials for 10G SFP+ RJ45, these modules run hotter than fiber. A skip-slot installation (leaving an empty port between modules) is essential for industrial grade 10G SFP+ RJ45 heat dissipation, preventing port overheating and potential link drops.
The full 10GBASE-T SFP+ 80m datasheet and price list are available directly from HYTOPTODEVICE. We provide wholesale 80m 10Gbps RJ45 transceiver Broadcom chips and offer competitive bulk purchase 10G SFP+ RJ45 80m pricing for Aruba network expansions.
Quality Assurance：Your Trusted Optical Transceiver Source
HYTOPTODEVICE is a vertically integrated manufacturer of high-performance optical transceivers. By controlling core materials at the source, we ensure every SFP module meets the highest standards of reliability and customization.
Vertical Integration: In-house core material production ensures a stable, self-sufficient supply chain for all optical modules.
Total Traceability: End-to-end oversight from raw components to final transceiver assembly guarantees 100% controllability.
Bespoke Solutions: Expert-led R&D provides customized SFP transceiver designs tailored to your specific technical needs.
24-Hour Response: Our technical team guarantees a primary response to any inquiry or quality concern within 24 hours.
Carrier-Grade Quality. Factory-Direct Control. Rapid Response.
Quality Certification & Compliance：
At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final inspection, our processes ensure global compliance and reliability.
We adhere to rigorous standards for our SFP modules and network solutions:
ISO 9001: Certified quality management and production consistency.
CE,UL & FCC: Fully compliant for seamless Global Market Access.
RoHS: Committed to environmental responsibility and hazardous material control.
Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.
Certified Quality. Global Standards. Guaranteed Performance.
