| NO. | Brand | Compatible P/N | Remarks |
| 1 | Cisco | SFP-10G-T-80 | |
| 2 | Arista Networks | SFP-10GE-T80 | |
| 3 | Dell | GP-10GSFP-T80 | |
| 4 | Brocade | 10G-SFPP-T-80 | |
| 5 | H3C | SFP-XG-T-80 or SFP-XG80-T | |
| 6 | Intel | E10GSFPT80 | |
| 7 | Juniper | EX-SFP-10GE-T80 | |
| 8 | MikroTik | S+RJ8010 | |
| 9 | Palo Alto Networks | PAN-SFP-PLUS-T80 | |
| 10 | HW | SFP-10G-T-80 | |
| 11 | Aruba (HPE) | JL563B-80 OR JL563A-80 | |
| 12 | Ubiquiti (UBNT) | UACC-CM-RJ45-MG-80 | |
| 13 | HPE BladeSystem | 813874-B22 | |
| 14 | Generic | HYT-SFP-10G-T-B80 |
This Palo Alto compatible 10G copper SFP+ 80m distance transceiver is hardware-coded for 100% "Plug-and-Play" compatibility with:
PA-3200 Series: PA-3220, PA-3250, PA-3260.
PA-5200 Series: PA-5220, PA-5250, PA-5260, PA-5280.
PA-5450 Series: High-performance modular chassis.
Security Appliance Uplinks: Connecting Palo Alto firewalls to core switches across large data center rows where standard 30m limits are exceeded.
WiFi-6/6E Security Segmentation: A dedicated NBASE-T SFP+ module for WiFi-6 backhaul, allowing firewalls to inspect high-speed 2.5G/5G/10G wireless traffic.
PAN-SFP-PLUS-T80 distance extension solution: Extending 10G network 80 meters without fiber using existing Cat6A 10G copper infrastructure in enterprise headquarters.
| Palo Alto Networks Compatible | PAN-SFP-PLUS-T80 | Vendor Name | HYTOPTODEVICE |
| Form Factor | SFP+ | Data Rate | 10Gbps |
| Cable Type | Cat6a/7 | Max Distance | 80m |
| Interface | RJ-45 | DDM Support | No |
| Max. Power Consumption | ≤2.5W | Media | Copper |
| Protocols | IEEE 802.3an, IEEE 802.3az, SFP+ MSA, SFF-8431 | Operation Temperature | 0 to 70°C (32 to 158°F) |
Standard modules draw high power, creating thermal noise that limits reach. The HYTOPTODEVICE Broadcom BCM84891 10G copper SFP+ 80m uses an improved Broadcom chip solution to lower power to 2.0W–2.5W. This efficiency, plus a high-performance PHY 10G copper module, allows for an 80 meter 10Gbps Ethernet over copper link with superior error correction on Cat6A 10G lines.
No. This module is built for high-throughput security environments. It is a multi-rate 2.5G 5G 10G copper SFP+ 80m transceiver. To maintain 80m stability, it does not support 100Mbps or 1Gbps legacy Ethernet speeds.
To achieve a stable 80 meter 10Gbps Ethernet over copper link, you must use Cat6A or Cat7 shielded cables. Standard Cat6 is not recommended for the Cat6A 10G distance limit of 80m, as it cannot shield against the interference required for high-speed security uplinks.
Firewalls often run at high CPU loads, increasing internal heat. Even with our improved thermal materials for 10G SFP+ RJ45, a skip-slot installation (leaving a gap between modules) is essential for industrial grade 10G SFP+ RJ45 heat dissipation to prevent port-level thermal throttling.
The full 10GBASE-T SFP+ 80m datasheet and price list are available directly from HYTOPTODEVICE. We provide wholesale 80m 10Gbps RJ45 transceiver Broadcom chips and offer competitive bulk purchase 10G SFP+ RJ45 80m pricing.
Quality Assurance：Your Trusted Optical Transceiver Source
HYTOPTODEVICE is a vertically integrated manufacturer of high-performance optical transceivers. By controlling core materials at the source, we ensure every SFP module meets the highest standards of reliability and customization.
Vertical Integration: In-house core material production ensures a stable, self-sufficient supply chain for all optical modules.
Total Traceability: End-to-end oversight from raw components to final transceiver assembly guarantees 100% controllability.
Bespoke Solutions: Expert-led R&D provides customized SFP transceiver designs tailored to your specific technical needs.
24-Hour Response: Our technical team guarantees a primary response to any inquiry or quality concern within 24 hours.
Carrier-Grade Quality. Factory-Direct Control. Rapid Response.
Quality Certification & Compliance：
At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final inspection, our processes ensure global compliance and reliability.
We adhere to rigorous standards for our SFP modules and network solutions:
ISO 9001: Certified quality management and production consistency.
CE,UL & FCC: Fully compliant for seamless Global Market Access.
RoHS: Committed to environmental responsibility and hazardous material control.
Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.
Certified Quality. Global Standards. Guaranteed Performance.
