Huawei SFP-GE-LX-SM1310  Compatible 1000BASE-LX SFP Optical Transceiver Module | HYTOPTODEVICE

Full Compatibility List and Supported Devices of  Fiber Optic Transceiver

The SFP-GE-LX-SM1310 compatible optical module is pre-coded with authentic Huawei VRP EEPROM signatures (often associated with Huawei Part Number 02315204), ensuring native plug-and-play identification across:

1.Huawei CloudEngine (CE) Data Center Series

• Leaf/Spine Switches: CE5800, CE6800, CE8800 Series

• Note: When deployed inside 10GE SFP+ optical ports on CloudEngine hardware, you must enter the interface config and manually drop the line speed to match the transceiver using the command: speed 1000.

2.Huawei Campus & Enterprise Campus Series

• Layer 2/Layer 3 Managed Switches: S2700, S3700, S5700, S6700 Series (e.g., S5720-EI, S6730-H)

• Enterprise Routers & Firewalls: AR1200, AR2200, AR3200 Series, USG6000 Next-Gen Firewalls

• Enterprise Campus Trunking: Interconnecting core Huawei campus distribution switches across separate facilities over structural Single-Mode fiber paths up to 10 kilometers.

• Data Center Core Aggregation: Linking high-performance cloud server nodes or network-attached storage (NAS) backplanes to high-density Huawei CloudEngine switches via dedicated 1G fiber links.

• Metropolitan Area Network (MAN) Extensions: Bridging remote corporate branches, warehouse complexes, or regional edge offices directly to the central headquarters network fabric.

FAQ for Transceiver Module

Q1:Can the Juniper Networks JX-SFP-1GE-LX be used in Juniper Networks 10G SFP+ or 25G SFP28 ports?
A1: Yes, absolutely. The Juniper JX-SFP-1GE-LX uses the standard 1000BASE-X fiber protocol, which is natively understood by Juniper’s 10G/25G hardware interfaces. To bring the link up, you must configure the port speed down to 1G via the Juniper EOS command line using: speed forced 1000full.

Q2:Does this Juniper Networks JX-SFP-1GE-LX support Digital Diagnostic Monitoring (DDM)?
A2:Yes. Our JX-SFP-1GE-LX supports DDM/DOM,allowing network administrators to monitor real-time metrics such as TX/RX optical power,bias current, voltage and temperature via the show transceiver command.

Q3: Can I pair an  Juniper JX-SFP-1GE-LX on one side of a link with a multimode transceiver on the other side? A3: No, this will not work. An LX module operates at a 1310nm long wavelength, while an SX module uses an 850nm short wavelength. Because they speak on completely different light frequencies, they will never establish an optical link. Both sides must use matching wavelengths.

Q4:What fiber cable is required for the JX-SFP-1GE-LX optical transceiver?
A4:This module uses wavelength 1310nm to transmit traffic over Single-Mode Fiber (SMF) with an LC Duplex connector. 

Q5:Do I need to turn off my Juniper switch before inserting the JX-SFP-1GE-LX optical transceiver?
A5: No, the JX-SFP-1GE-LX is hot-pluggable module. You can insert or extract the module while the system is powered on and handling active production traffic, without causing any electrical faults or downtime.

Q6:Can this module auto-negotiate its speed down to 100Mbps Fast Ethernet?
A6: No, the JX-SFP-1GE-LX does not support 10/100 Mbps old-legacy connectivity. It is a fixed-speed optical module designed to operate exclusively at 1 Gbps (1000 Mbps) line rates. 

Why Network Engineers Choose HYTOPTODEVICE

HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.

• 100% MSA-compliant modules with Cisco, Huawei,Dell,Juniper, and Arista compatibility
• ISO 9001:2015 certified manufacturing facility in Shenzhen
• Average lead time of 3–5 business days with DHL/FedEx express options
• Dedicated pre-sales engineering support for custom configurations
• Actual hardware,actual switches,actual results.we publish compatibility test video,eliminate compatibility anxiety. you can watch before you buy. 
• We can provide inspection and shipping videos to make you feel as if you are right here with the product.

"We replaced 200 Cisco-branded SFPs with HYTOPTODEVICE equivalents across our spine layer — zero compatibility issues, 40% cost reduction."— Network Architect, Tier-2 ISP, Germany

Quality Certification & Compliance

 At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final inspection, our processes ensure global compliance and reliability.

We adhere to rigorous standards for our SFP modules and network solutions:

• ISO 9001: Certified quality management and production consistency.

• CE & FCC: Fully compliant for seamless Global Market Access.

• RoHS: Committed to environmental responsibility and hazardous material control.

• Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.

Certified Quality. Global Standards. Guaranteed Performance.

Rigorous Industrial Product Testing

   

100% 3rd Party Compatible

Partial Test Demonstration

Others