• Alcatel-Lucent  iSFP-GIG-LX Compatible 1000BASE-LX SFP Optical Transceiver | SFP 1310nm 10km SMF Bulk Wholesale | HYTOPTODEVICE
  • HYTOPTODEVICE Alcatel-Lucent iSFP-GIG-LX optical transceiver fix unrecognized module alarm
  • 1000BASE-LX 1310nm 10km SMF optical transceiver solve intermittent link drop issue
  • DDM monitoring optical transceiver troubleshoot low RX power for enterprise network
  • Compatible Alcatel-Lucent SFP optical transceiver bulk replace faulty network modules
  • Compatible compatible SFP optical transceiver bulk replace faulty network modules
  • Alcatel-Lucent  iSFP-GIG-LX Compatible 1000BASE-LX SFP Optical Transceiver | SFP 1310nm 10km SMF Bulk Wholesale | HYTOPTODEVICE
  • HYTOPTODEVICE Alcatel-Lucent iSFP-GIG-LX optical transceiver fix unrecognized module alarm
  • 1000BASE-LX 1310nm 10km SMF optical transceiver solve intermittent link drop issue
  • DDM monitoring optical transceiver troubleshoot low RX power for enterprise network
  • Compatible Alcatel-Lucent SFP optical transceiver bulk replace faulty network modules
  • Compatible compatible SFP optical transceiver bulk replace faulty network modules

Alcatel-Lucent  iSFP-GIG-LX Compatible 1000BASE-LX SFP Optical Transceiver | SFP 1310nm 10km SMF Bulk Wholesale | HYTOPTODEVICE

High-performance iSFP-GIG-LX  optical transceiver with 10km reach over SMF. SFP  form factor, Duplex LC connector,100% compatible with Alcatel-Lucent and other mainstream brands. No firmware changes needed,right out of the box. Equivalent to the OEM,Save more brand premium for your project. see the compatible list.
NO. Brand  Compatible P/N Transceiver Type
1 Cisco  GLC-LH-SMD SFP-G85-5LD
2 Alcatel-Lucent  iSFP-GIG-LX SFP-G31-40LD
3 HPE Procurve  J4859C SFP-G55-80LD
4 Arista Networks SFP-1G-LX SFP-G55-100LD
5 Juniper Networks  JX-SFP-1GE-LX  SFP-G55-120LD
6 Huawei  SFP-GE-LX-SM1310  SFP-G55-160LD
7 Brocade  E1MG-LX-OM
8 H3C  SFP-GE-LX-SM1310


Description

Alcatel-Lucent iSFP-GIG-LX Compatible 1000BASE-LX SFP Optical Transceiver | SFP 1310nm 10km SMF Bulk Wholesale | HYTOPTODEVICE

Product Overview


 The  iSFP-GIG-LX is a high-performance, Alcatel-lucent compatible   optical transceiver. Featuring a hot-pluggable SFP form factor, it supports data rate 1000Mbps transmission up to 10km over single-mode fiber (SMF) vias Duplex LC connector. With high-density networking and low power consumption, this optical module provides a cost-effective and highly reliable plug-and-play solution for Gigabit Ethernet fiber uplinks, ensuring seamless data transmission for enterprise and ISP networks worldwide. Compliant with both the SFP Multi-Source Agreement (MSA) and IEEE 802.3ah-2004.DOM supported.


Key Technical Specifications 

Alcatel-Lucent Compatible   iSFP-GIG-LX Vendor Name HYTOPTODEVICE
Form Factor SFP Max Data Rate 1.25Gbps
Wavelength 1310nm Max Distance 10km 
Connector Duplex LC Transmitter Type 1310nm FP
Cable Type SMF Receiver Type PIN
TX Power -9.0~-3.0dBm Receiver Sensitivity < -22.0dBm
Typical Power Consumption ≤1W Receiver Overload -3dBm
Bit Error Ratio (BER) 1E-12 DDM/DOM Support
Protocols SFF-8472 MSA Compliant, IEEE 802.3ah-2004 Operation Temperature 0 to 70°C (32 to 158°F)


Usage Guidelines & Best Practices

  • Fiber Choice: Duplex LC OS1/OS2 SMF (9/125 µm). Do NOT use MMF

  • Connector Match: UPC/PC polish only. Do NOT use APC.

  • Cleanliness & Dust: Keep dust caps on whenever unattached. Clean fiber end-faces with a optical cleaning pen before insertion; dust causes over 80% of optical link failures.

  • Link Setup:Lock speed to 1.25Gbps (Full Duplex) manually if auto-negotiation fails.

  • Handling: Wear ESD protection. Keep fiber bend radius ≥ 30 mm.

  • Installation & Hot-Swap Rules:MSA hot-swappable. Insert/remove gently without powering down.

  • Environment:Industrial grade (-4-°C to 85°C). Avoid extreme heat, moisture, and dust.

 Links to the Datasheet, User Guide and Compatibility Guides are available on the product page.

Full Compatibility List and Supported Devices 

1. Supported Hardware & Firmware

Tailored Alcatel-Lucent firmware fixes common third-party optical transceiver authentication failures and system alarms. This compatible optical transceiver supports zero-alarm recognition and complete DDM data display, delivering stable plug-and-play performance for all mainstream Alcatel-Lucent switching platforms.
  • OmniSwitch 2000 Series: 2160, 2260, 2360, 2560, 2960
  • OmniSwitch 6000 Series: 6360, 6465, 6560/E, 6570M, 6855, 6865
  • OmniSwitch 9000 Series: OmniSwitch 9000 enterprise core switches
  • Universal Replacement: Fully compatible with all Alcatel-Lucent devices supporting original iSFP-GIG-LX optical transceiver, solving module unrecognized alarm and link failure issues

2. Multi-Brand Cross Compatibility

Built on universal SFP MSA specification, this optical transceiver works seamlessly with Huawei, Arista,Juniper, Ruijie, ZTE, H3C, Ubiquiti and other vendors for multi‑vendor mixed‑network environments.

3. Free Value-Added Services

  • Custom firmware for multi-device compatibility
  • Free sample testing before bulk orders
  • Complete test reports for project acceptance
  • Strict batch consistency quality control
  • Free custom EEPROM programming for special and legacy network environments


Primary Application Scenarios

  • Enterprise & Campus Networks: Replace faulty optical transceiver modules to fix long-distance link instability for office and campus network systems.
  • Data Center Uplinks: Stabilize data center inter-building uplink transmission, solving packet loss caused by aging or incompatible optical transceiver.
  • Alcatel-Lucent Module Replacement: Cost-effective substitute for defective and aging iSFP-GIG-LX optical transceiver modules.
  • Enterprise Network Renovation: Bulk optical transceiver sourcing to resolve large-scale module aging and compatibility issues.


Connectivity Solutions(Applications) 

1.1GbE Switch-to-Switch Connectivity
HYTOPTODEVICE third-party optical transceiver factory network deployment

2.1GbE Switch to Media Converter ConnectivityHYTOPTODEVICE compatible optical transceiver outdoor monitoring network

3.1GbE Structured Cabling Interconnect

HYTOPTODEVICE  1000BASE-LX optical transceiver 1310NM 10KM SMF enterprise backbone network

4.1GbE Switch-to-NIC Interconnection

HYTOPTODEVICE high-quality optical transceiver for bulk project procurement

The Core Feature

1. High-Efficiency & Low-Power 1G Data Center Interconnect

Reduces operational power consumption while maintaining reliable, full-duplex 1.25 Gbps throughput across campus and data center networks.

HYTOPTODEVICE compatible optical transceiver with low power consumption


2.
Zero-Downtime Reliability & 100% Brand Compatibility

 Engineered with high-reliability components and pre-coded firmware to ensure 100% seamless integration and uninterrupted performance across all major OEM networking brands (Cisco, Juniper, Arista, Dell, etc.).Specific Compatibility Video available before you buy.

HYTOPTODEVICE plug‑and‑play optical transceiver eliminates unsupported module alarms


3.Rigorous 100% Comprehensive Testing

Every optical transceiver passes multi-stage factory testing—including optical power validation, spectral analysis, distance simulation, and host compatibility checks—to guarantee zero link failure upon deployment.—take a virtual tour of our Test Center to see our Quality Assurance process in action.

HYTOPTODEVICE factory‑supply 1000base-lx optical transceivers with comprehensive test

 

FAQ

Q1: Is this 1.25G LX SFP optical transceiver compatible with Alcatel-Lucent switches?
A: Yes. The HYTOPTODEVICE iSFP-GIG-LX optical transceiver offers full pin compatibility with Alcatel-Lucent switches. Custom firmware ensures zero-alarm recognition and plug-and-play use on official device platforms.


Q2: Can a standard 1.25G LX optical transceiver run on 10G SFP+ switch ports?

A: Yes. This HYTOPTODEVICE gigabit optical transceiver supports downward compatibility with 10G SFP+ ports. Locking port speed to 1Gbps delivers steady network operation without negotiation errors.

Q3: Does this Alcatel-Lucent compatible optical transceiver follow official SFP MSA rules?

A: Yes. This HYTOPTODEVICE optical transceiver strictly complies with SFP MSA and IEEE 802.3z standards, ensuring universal interoperability with standard enterprise network hardware.

Q4: Can I install a 1000BASE-LX optical transceiver on multimode fiber lines?

A: Not suitable. This 1310nm LX optical transceiver is designed exclusively for single-mode fiber. MMF deployment causes signal distortion and unstable network links.

Q5: Are LX and SX optical transceiver modules able to interconnect directly?
A: No. 1310nm LX and 850nm SX optical transceiver modules use different wavelength specifications, making direct pairing unable to establish valid fiber links.

Q6: Does this iSFP-GIG-LX optical transceiver support real-time DDM monitoring?
A: Yes. The HYTOPTODEVICE replacement optical transceiver features full DDM/DOM functionality, supporting real-time tracking of power, temperature and voltage for quick network troubleshooting.

Q7: What is the standard transmit power range of this 1000BASE-LX optical transceiver?

A: This HYTOPTODEVICE LX optical transceiver features a calibrated TX power of -9 ~ -3 dBm, ensuring stable 10km single-mode fiber transmission for enterprise networks.

Q8: How to troubleshoot low RX power issues on LX optical transceiver links?

A: Inspect dirty fiber end faces, excessive line attenuation, incorrect TXRX wiring and defective patch cords, the main causes of low receiving power on optical transceiver links.

Q9: Are SC-LC hybrid patch cords compatible with LX SFP optical transceiver?
A: Yes. This duplex LC optical transceiver works fine with SC-to-LC patch cords when paired with standard G.652 single-mode fiber for regular long-distance transmission.

Q10: Can I use APC green fiber cables with standard LX optical transceiver modules?

A: No. APC polished cables cause severe optical reflection, triggering packet loss and link jitter. Only UPC blue cables match standard SFP optical transceiver operation.

Q11: Why do LX optical transceiver links experience random intermittent drops?

A: Fluctuating links usually result from contaminated fiber ports, high signal attenuation, mismatched connectors, port negotiation errors or out-of-range operating temperature for the optical transceiver.

Q12: What temperature range suits this commercial LX optical transceiver?

A: This commercial-grade HYTOPTODEVICE optical transceiver runs reliably at 0℃ to 70℃, fitting standard indoor enterprise and data center network environments.

Q13: Why clean fiber connectors regularly for 1310nm LX optical transceiver links?

A: 1310nm optical signals are highly sensitive to surface dust and scratches. Dirty connectors raise attenuation and cause unstable transmission for long-range optical transceiver links.

Q14: Does this Alcatel-Lucent compatible optical transceiver meet global safety certifications?
A: Yes. All HYTOPTODEVICE optical transceiver modules pass CE, FCC and RoHS certifications, complying with international commercial network deployment standards.

Q15: Do low freezing temperatures affect commercial LX optical transceiver performance?

A: Yes. Sub-zero temperatures exceed the commercial working range, reducing optical power and causing unstable packet transmission for this standard optical transceiver.

Packaging Options & Custom‑Packaging Solutions

Every transceiver module gets reliable ESD‑safe packaging out of the box. Standard packing is ready for immediate shipment, while custom‑printed packaging with your logo is available for bulk orders.


Why Network Engineers Choose HYTOPTODEVICE

HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
  • 100% MSA-compliant modules with Cisco, Huawei,Dell,Juniper, and Arista compatibility
  • ISO 9001:2015 certified manufacturing facility in Shenzhen
  • Average lead time of 3–5 business days with DHL/FedEx express options
  • Dedicated pre-sales engineering support for custom configurations
  • Actual hardware,actual switches,actual results.we publish compatibility test video,eliminate compatibility anxiety. you can watch before you buy. 
  • We can provide inspection and shipping videos to make you feel as if you are right here with the product.


"We replaced 200 Cisco-branded SFPs with HYTOPTODEVICE equivalents across our spine layer — zero compatibility issues, 40% cost reduction."— Network Architect, Tier-2 ISP, Germany


Quality Certification & Compliance

 At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final inspection, our processes ensure global compliance and reliability.

We adhere to rigorous standards for our SFP modules and network solutions:

  • ISO 9001: Certified quality management and production consistency.

  • CE & FCC: Fully compliant for seamless Global Market Access.

  • RoHS: Committed to environmental responsibility and hazardous material control.

  • Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.

Certified Quality. Global Standards. Guaranteed Performance.




Rigorous Industrial Product Testing

   

100% 3rd Party Compatible

Partial Test Demonstration

Others

 

 




  • Alcatel-Lucent  iSFP-GIG-LX Compatible 1000BASE-LX SFP Optical Transceiver | SFP 1310nm 10km SMF Bulk Wholesale | HYTOPTODEVICE
  • HYTOPTODEVICE Alcatel-Lucent iSFP-GIG-LX optical transceiver fix unrecognized module alarm
  • 1000BASE-LX 1310nm 10km SMF optical transceiver solve intermittent link drop issue
  • DDM monitoring optical transceiver troubleshoot low RX power for enterprise network
  • Compatible Alcatel-Lucent SFP optical transceiver bulk replace faulty network modules
  • Compatible compatible SFP optical transceiver bulk replace faulty network modules

Download