H3C SFP-XG-T-S Compatible 10G SFP+ RJ45 Transceiver Module | 30m Cat6A Reach, Multi-Rate NBASE-T, Zero-Alarm Operation for H3C Comware | HYTOPTODEVICE
Product Overview
H3C SFP-XG-T-S is a high-performance 10GBASE-T SFP+ to RJ45 Copper Transceiver Module, 100% compatible with H3C (New H3C Group) networking equipment. Designed for high-speed, short-reach connections in data centers and enterprise networks, it delivers reliable 10 Gbps throughput over Cat6a/Cat7 copper cabling for distances up to 30 meters.
Equipped with advanced 1G/2.5G/5G/10G auto-negotiation, low power consumption, and low latency, this hot-pluggable module provides a highly flexible and cost-effective solution for intra-rack and inter-rack connections, allowing seamless network upgrades using existing copper infrastructure.
Key Features & Highlights
-
100% H3C Compatible: Plug-and-play functionality engineered for H3C switches, routers, and enterprise network platforms.
-
High-Speed 10G Copper Link: Supports up to 10Gbps data transmission over Cat6a/Cat7 cabling up to 30m.
-
Multi-Rate Auto-Negotiation: Backward compatible with 1000BASE-T (1G), 2.5G, 5G, and 10G BASE-T speeds.
-
Energy Efficient Design: Optimized low power consumption compliant with IEEE 802.3az Energy-Efficient Ethernet (EEE).
-
Industry Standards Compliant: Fully meets IEEE 802.3an, SFF-8431, and SFP+ MSA specifications.
Key Technical Specifications
| H3C Compatible |
SFP-XG-T-S |
Vendor Name |
HYTOPTODEVICE |
| Form Factor |
SFP+ (Hot-pluggable) |
Data Rate |
10 Gbps (1G/2.5G/5G/10G Auto-negotiation) |
| Connector |
RJ-45 |
Cable Distance |
30m |
| Media |
Copper |
Cable Type |
Cat6a/Cat7 |
| Max. Power Consumption |
≤2.5W |
DDM Support |
YES |
| Protocols |
IEEE 802.3an, IEEE 802.3az, SFF-8431 |
Operation Temperature |
0 to 70°C (32 to 158°F) |
For detailed technical specifications, please refer to the Datasheet
Usage Guidelines & Best Practices
To ensure optimal performance, broad device compatibility, and extended hardware lifespan, please follow these deployment best practices for your 10GBASE-T SFP+ copper transceiver:
1. Cabling Requirements & Distance Limits
-
Recommended Cabling: For maximum 10Gbps transmission up to 30 meters, always use high-quality Cat6A or Cat7 Shielded Twisted Pair (STP) cables.
-
Legacy Cable Limitations: Unshielded Cat6 cables can theoretically support 10G up to 30–55m under ideal lab conditions, but in production environments, they are highly prone to signal degradation. Cat6A STP is strongly recommended.
2. EMI Protection & Crosstalk Mitigation
High-speed 10Gbps copper signals are extremely sensitive to Electromagnetic Interference (EMI) and Alien Crosstalk (AXT).
-
Use fully grounded STP/FTP cables and shielded RJ45 connectors.
-
Avoid running network cables parallel to high-voltage power lines, fluorescent lighting, or heavy industrial machinery.
3. Thermal & Power Management
10GBASE-T transceivers consume significantly more power (typically 2.5W) and generate considerably more heat than optical transceivers.
-
Port Spacing: Avoid populating adjacent SFP+ ports with copper transceivers continuously.
-
Airflow Optimization: Leave at least one empty port between copper modules (e.g., checkerboard or staggered layout) to facilitate heat dissipation and prevent thermal throttling.
4. Insertion & Hot-Plugging Sequence
While the transceiver is hot-swappable, following the correct sequence prevents electrical surge or signaling glitches:
-
Insert Module: Plug the transceiver into the SFP+ slot until it clicks, then pull down the bail latch to secure it in place.
-
Connect Cable: Plug the RJ45 cable into the transceiver.
-
To disconnect, always remove the RJ45 cable first before releasing the module latch.
5. System Recognition & Auto-Negotiation
-
Firmware: Ensure your switch or device firmware is updated to support 10GBASE-T copper transceivers.
-
Negotiation Delay: Allow 5–15 seconds after connection for the network OS (e.g., Juniper Junos, Cisco NX-OS) to auto-negotiate link speed and duplex status.
-
Manual Override: If the link fails to establish, manually set the port speed to 10G Full-Duplex instead of relying on auto-negotiation.
6. Physical Handling & Care
-
Always handle the module by its metallic casing or bail latch.
-
Do not touch the PCB gold fingers to prevent electrostatic discharge (ESD) and contact contamination.
-
Do not apply excessive force when plugging in or removing the RJ45 connector.
For detailed operation instructions, please refer to the User Guide.
Full Compatibility List & Firmware Adaptation
All HYTOPTODEVICE 10G SFP+ RJ45 30m modules complete continuous runtime testing and multi-version Comware firmware verification on genuine H3C hardware. Custom short-range EEPROM perfectly matches H3C official module identification protocol. It resolves typical compatibility problems of generic modules including alarm popups, unactivated ports and rate negotiation failure.
1. Validated H3C Hardware Platforms
Plug-and-play compatible with mainstream H3C switching equipment with SFP+ slots:
- H3C S5130 / S5560 / S6520 / S6860 Series Enterprise Switches
- H3C CE6800 / CE7800 Series Data Center Switches
- H3C MSR Series Routers and SecPath Firewalls with SFP+ interfaces
2. Cross-Brand Compatibility
Complying with universal SFP+ MSA standards, this 10G SFP+ RJ45 module supports normal communication with Arista, Cisco, Brocade, H3C and other brand equipment, adapting to multi-brand hybrid network architectures.
-
Standard / Open Platforms: Plug-and-play compatible out of the box with open-architecture hardware such as MikroTik, TP-Link, and Fortinet.
-
Vendor-Locked Platforms: We offer complimentary OEM firmware coding for strict or vendor-locked systems (e.g., Arista, Juniper, H3C, Huawei, Brocade, NVIDIA/Mellanox) prior to shipment—ensuring instant recognition and eliminating "unsupported transceiver" warnings.
3.Value-Added Compatibility Services & Self-Programming Support
-
On-Site Recoding Solutions: Gain full control with our optional smart coding boards and software, enabling your team to rewrite EEPROM compatibility codes on demand.
-
Free Lifetime Firmware Maintenance: Enjoy complimentary firmware update downloads whenever switch OS versions upgrade or new hardware platforms are released.
-
Custom Code Adaptation: Need support for specialized or legacy network systems? Our engineers offer free custom firmware tailoring to guarantee 100% link-up.
Primary Application Scenarios
Tailored for short-range high-density networking, this 10G SFP+ RJ45 30m module focuses on indoor close-distance 10G copper transmission scenarios:
- In-Rack Server 10G Uplink: Build low-cost 10G short links between top-of-rack switches and rack servers.
- Intra-Room Switch Stacking: Implement 10G high-speed stacking for adjacent H3C switches within the same computer room.
- High-Density Wireless Backhaul: Deliver 2.5G/5G/10G adaptive uplink for densely deployed Wi-Fi 6/7 wireless APs.
- Short-Span Leaf-Spine Fabric Connection: Suitable for short-distance row-to-row interconnection in small and medium data centers.
- Enterprise Indoor Network Micro-Upgrade: Rapidly upgrade local 1G links to 10G without reworking short-distance copper wiring.
Connectivity Solutions(Applications)
1.Switch-to-Switch 10G Copper Interconnection
2.10G to 10G Switch to Adapter Card Links

3.10G Structured Cabling System Deployment
4.Spine-Leaf 10G Copper Interconnection

The Core Features
1.Ultra-Low Power Consumption for Maximum Energy Efficiency
This H3C-compatible **10G SFP+ RJ45 30m** transceiver adopts premium professional PHY chip solution. Optimized low-power circuit architecture controls full-load power consumption strictly between 2.0W–2.5W. It generates less heat than ordinary long-range copper modules. It lowers thermal load in dense H3C cabinet environments and reduces long-term operation energy consumption. It supports 24/7 continuous network operation.

2.Tool-Free Hot-Swappable Design & Seamless Plug-and-Play
Compliant with SFF-8431 SFP+ MSA international standards. This **10G SFP+ RJ45** module supports tool-free hot-swap. Engineers can insert or remove modules online without shutting down H3C network hardware. Preloaded exclusive H3C SFP-XG-T-S customized EEPROM enables seamless native recognition across all mainstream Comware firmware versions. It achieves zero-alarm and zero-port-block plug-and-play to simplify daily network maintenance.

3.Tested in Host Devices for Proven Interoperability
Every **10G SFP+ RJ45 30m** module undergoes rigorous real-machine interoperability testing on genuine H3C hardware covering multiple Comware firmware iterations. Comprehensive multi-device linkage testing eliminates compatibility risks such as unrecognized hardware, rate negotiation failure and unstable links. It maintains reliable interoperability in standalone H3C networks and multi-brand hybrid network environments.

4. 100% Full Testing & Long-Term Reliability
We abandon sampling inspection and implement 100% full-item factory testing for every **10G SFP+ RJ45 30m** module. Test items include line-rate BER detection, high-low temperature cycle aging, long-duration pressure testing and real H3C switch link verification. Supported by high-quality chips and strict quality control, the module delivers consistent batch performance and outstanding anti-aging capability.

FAQ
Q1: Why do 10G SFP+ RJ45 transceivers run noticeably hot under regular working conditions?
A1: Converting SFP+ SerDes signals into 10GBASE-T copper Ethernet requires built-in PHY chips consuming 2.0W–3.0W power. A large amount of heat dissipates via the compact metal housing. HYTOPTODEVICE optimizes internal circuit layout to control thermal buildup for stable round-the-clock operation.
Q2: Can Cat5e or regular Cat6 cables deliver stable 10Gbps performance with 10G SFP+ RJ45 transceivers?
A2: Cat5e and standard Cat6 wiring cannot sustain reliable 10GBASE-T transmission even for short distances. To achieve full 10G speed using our H3C compatible 10G SFP+ RJ45 transceiver, Cat6A or Cat7 certified cabling is mandatory.
Q3: Does the choice between UTP and STP cable affect performance of 10G SFP+ RJ45 copper modules?
A3: Shielded Cat6A STP/FTP cabling is strongly recommended for 10G SFP+ RJ45 deployments. Shielded wiring minimizes alien crosstalk and suppresses EMI interference, especially when many copper cables are bundled together inside racks.
Q4: What triggers auto-negotiation failures between 10G SFP+ RJ45 modules and server onboard NICs?
A4: Negotiation errors mostly occur when switch ports are locked to fixed speed while the copper PHY expects dynamic auto-negotiation. Matching negotiation parameters on both ends can resolve this issue when deploying HYTOPTODEVICE 10G SFP+ RJ45 transceivers.
Q5: Should network architects choose DAC cables or 10G SFP+ RJ45 transceivers for ToR in-rack server connections?
A5: Passive DAC cables are preferable for pure intra-rack links. DAC consumes less than 0.1W, generates minimal heat and delivers ultra-low latency. Select our 10G SFP+ RJ45 modules if you need to reuse existing copper structured cabling infrastructure.
Q6: Is it possible to install a 10G SFP+ RJ45 transceiver inside a 25G SFP28 switch port?
A6: Most SFP28 ports support backward compatibility with 10G SFP+ modules. You can insert our 10G SFP+ RJ45 transceiver into a 25G slot, yet the maximum achievable link bandwidth will be capped at 10Gbps.
Q7: Why does DDM display module temperatures higher than 65°C even under low traffic loads?
A7: 10GBASE-T PHY chips draw nearly constant power regardless of actual data throughput. High temperature readings under light traffic are normal for 10G SFP+ RJ45 hardware. Our modules pass strict thermal cycling testing to maintain stable performance under such operating conditions.
Q8: Does the 10G SFP+ RJ45 transceiver support Wake-on-LAN functionality?
A8: WoL operation relies on end-to-end hardware compatibility. Our 10G SFP+ RJ45 module forwards magic packet frames normally, provided the connected server NIC and H3C switch port are properly configured to enable Wake-on-LAN.
Q9: What MTBF range can buyers expect for commercial-grade 10GBASE-T SFP+ transceivers?
A9: Typical 10GBASE-T copper modules feature an MTBF rating ranging from 500,000 to 1,000,000 hours. Continuous thermal stress shortens service life compared with optical transceivers. HYTOPTODEVICE applies comprehensive temperature cycling testing to enhance long-term stability.
Q10: Are all commercially available 10G SFP+ RJ45 transceivers TAA compliant for US federal projects?
A10: Not every copper transceiver meets TAA standards. If supplying US government, defense and public sector tender projects, you must select TAA-certified 10G SFP+ RJ45 modules. Contact our sales team to obtain compliant part options.
Packaging & Custom OEM Solutions
-
ESD Protection & Fast Shipping: Every module is sealed in an ESD-safe bag and ready for same-day dispatch from stock.
-
Custom OEM & Branding: We provide logo printing, private labeling, and custom packaging to help distributors and integrators build their brand—no factory investment required.

Why Network Engineers Choose HYTOPTODEVICE
HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
- Up to 70% cost savings vs OEM, transparent pricing & flexible bulk rates, supported quality returns
- 100% real-device compatible with Cisco, Huawei,Dell,Juniper, and Arista
- ISO 9001:2015 Shenzhen factory, full lineup: 1.25G/10G/25G/40G/100G/200G/400G/800G/1.6T transceivers
- Ample stock, fast global DHL/FedEx shipping in 3–5 working days
- Free pre-sales engineering support for custom EEPROM & private label firmware
- Real switch test videos available for pre-purchase review; inspection & shipping videos provided per order
“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia
Quality Certification & Compliance
At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.
We adhere to rigorous standards for our SFP modules and network solutions:
-
ISO 9001: Certified quality management and production consistency.
-
CE & FCC: Fully compliant for seamless Global Market Access.
-
RoHS: Committed to environmental responsibility and hazardous material control.
-
Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.
Certified Quality. Global Standards. Guaranteed Performance.

Rigorous Industrial Product Testing

100% 3rd Party Compatible

Partial Test Demonstration

