HYTOPTODEVICE D-Link DEM-436XT-BXD Compatible SFP BiDi 10G 40km Transceiver – Simplex LC Single-Mode Optic, Native D-Link OS Recognition, Bulk Wholesale Procurement Available
Product Overview
Our HYTOPTODEVICE D-Link DEM-436XT-BXD Compatible transceiver is single strand SFP BiDi 10G 40km transceiver, built for 40km point-to-point transmission over single strand OS2 single mode fiber.
• Wavelength: Tx1330nm/Rx1270nm (Match
D-Link DEM-436XT-BXU standard BiDi pairing)
• Interface: Standard LC simplex connector
• Transmission Distance: Stable 40km @10Gbps SMF OS2
Compliant with Hot-Pluggable SFP+ MSA, SFF-8472,SFP-8431, IEEE 802.3ae and RoHS standards and fully DDM/DOM real-time monitoring support, Delivering high-speed performance with optimized power efficiency, this single-strand SFP BiDi 10G 40km transceiver is the ideal solution for cross-campus backbones, metropolitan area network (MAN) rings, and long-range data center interconnects (DCI). We support samples, bulk wholesale and OEM private labeling, submit bulk inquiry or RFQ for competitive pricing and long-term supply contracts.
Key Technical Specifications
| D-Link Compatible |
DEM-436XT-BXD |
Vendor Name |
HYTOPTODEVICE |
| Form Factor |
SFP+ |
Max Data Rate |
10.7Gbps |
| Wavelength |
TX1330nm/RX1270nm |
Max Distance |
40km |
| Connector |
Simplex LC |
Transmitter Type |
1330nm DFB |
| Cable Type |
SMF |
Receiver Type |
PIN |
| TX Power |
-1.0~+5dBm |
Receiver Sensitivity |
< -15dBm |
| Max. Power Consumption |
≤1W |
DOM/DDM |
Fully Supported |
| Protocols |
SFP+ MSA, SFF-8472, IEEE 802.3ae, RoHS Compliant |
Operation Temperature |
0 to 70°C (32 to 158°F) |
For detailed technical specifications, please refer to the Datasheet
Usage Guidelines & Operational Best Practices
• BiDi Pairing Rule: SFP‑10G‑BXD (Tx1330/Rx1270) must pair with
SFP‑10G‑BXU (Tx1270/Rx1330) at remote end. Two BXD modules will NOT form a valid link.
• Cabling Requirement: Use OS2 single‑mode simplex‑LC UPC cables only. Multimode fiber / APC connectors reduce reach and cause link issues; keep connectors clean.
• Port Notice: Install only into standard SFP+ ports. Do not force into 1G‑SFP slots. Disable transceiver‑block policy if needed on host devices.
• Environment: Run within 0‑70 °C. Avoid high‑heat, dusty, poorly ventilated rack positions.
• Hot‑swap: Supports hot‑swap; disconnect fiber before plugging / unplugging to protect optical ports.
• DDM Monitoring: Enable DDM/DOM; monitor optical power and temperature for early fault warning.
• Pre‑test Recommendation: Test sample units with real hardware before large‑scale bulk deployment.
• Laser Safety: Avoid direct eye exposure to powered optical ports; infrared laser can harm eyes.
For detailed operation instructions, please refer to the User Guide.
Full Compatibility List & Supported Network Hardware
1.Native D-Link OS Compatibility
Every factory-calibrated SFP BiDi 10G 40km Transceiver passes real-machine interoperability testing on official D-Link operating systems. Preloaded with exclusive D-Link matching data, the module achieves zero recognition failure, no unsupported transceiver alert logs, and complete real-time DDM data display on D-Link network devices. It supports direct replacement of original D-Link DEM-436XT-BXD modules without extra configuration debugging, ensuring stable and compliant operation for commercial campus and enterprise transport network bulk procurement projects.
Compatible D-Link Device Series:
- D-Link DGS Series Layer 3 Core Campus Switches
- D-Link DES Series Enterprise Access Aggregation Switches
- D-Link Cross-Campus Core-to-Access 40km Single-Fiber Interconnection Equipment
- D-Link Office Building Long-Reach Trunk Hardware
2.Multi-Brand Cross Compatibility
This 10G BiDi SFP+ Module maintains stable interoperability for mixed-vendor network architectures, suitable for campus renovation, metro ISP construction and system integration turnkey projects. Supported brands include Cisco, Huawei, Juniper Networks, Arista, HPE, H3C and other mainstream brands
3.Free Custom EEPROM Re-Flash Service
Complimentary permanent EEPROM rewrite for all bulk orders of SFP BiDi 10G 40KM Transceiver. Upgrade D-Link OS or migrate modules to other brand racks; our team re-codes firmware free of charge to maintain stable 40km single-fiber bidirectional links for evolving multi-vendor metro architectures.
Primary Application Scenarios
- Bulk replacement and upgrade of aging D-Link DEM-436XT-BXD modules for campus 40km single-fiber aggregation interconnection
- University campus backbone network bandwidth iteration adopting SFP BiDi 10G 40km Transceiver to build cost-saving single-fiber 10G core links
- Enterprise cross-building point-to-point interconnection deploying simplex SFP BiDi 10G 40km Transceiver for fiber-saving 40km 10G trunk transmission
- Industrial park and office park edge bandwidth expansion using low-jitter single-fiber BiDi SFP BiDi 10G 40km Transceiver for medium-haul optical transmission
- System integrator large batch procurement standard SFP BiDi 10G 40km Transceiver for multi-vendor hybrid D-Link campus network integration projects
- Commercial enterprise data room infrastructure transformation adopting SFP BiDi 10G 40km Transceiver for single-fiber core-to-access trunk deployment
Connectivity Solutions(Applications)
1.Switch-to-Switch Interconnection

2.Switch-to-NIC Connectivity

3.Core to Access (With Structured Cabling)

The Core Features
1.50% Fiber Resource Saving & Low-Cost Network Upgrade
Optimize your current network infrastructure without the high cost of laying new cables. By transmitting and receiving signals over a single strand of fiber, our 10G BiDi SFP+ transceivers help you squeeze maximum value out of your existing fiber cabling.

2.Double Your Network Capacity Instantly
Upgrade your bandwidth effortlessly. Utilizing advanced Wavelength Division Multiplexing (WDM) technology, this module allows bidirectional traffic over a single fiber strand, effectively doubling your network capacity instantly while cutting cabling costs in half.

3.Energy-Efficient 10G Connectivity for Data Centers
Designed for high-density, high-speed modern data centers, this SFP+ transceiver features an ultra-low power consumption of just 1W. Achieve stable, green, and cost-effective 10G data transmission while significantly reducing operational cooling costs.

4.Seamless Cross-Brand Interoperability
Enjoy worry-free integration into your multi-vendor environment. Every single unit undergoes rigorous compatibility testing on original brand switches to ensure seamless cross-brand interoperability. Real products, real switches, real results—Specific Compatibility Video available upon request.

5.Comprehensive Testing for Rock-Solid Reliability
Reliability is our cornerstone. From signal integrity and distance runs to extreme temperature cycles, our comprehensive testing procedure guarantees that every 10G BiDi 40km SFP+ module delivers stable, packet-loss-free performance under any network load before leaving our Test Center.

FAQ
Q1: Does single-fiber BiDi network deployment require dual-model inventory management?
A: Single-strand BiDi transmission relies on two different wavelength modules to complete bidirectional communication. Enterprises need to purchase, classify and store two independent SKUs separately, which greatly increases the difficulty of daily asset inventory. HYTOPTODEVICE matched-set SFP BiDi 10G 40km Transceiver provides paired packaging to simplify bulk inventory management for single-fiber network projects.
Q2: How to standardize port records for BiDi modules in high-density cabinet wiring scenarios?
A: Traditional dual-fiber network labeling and filing standards cannot adapt to the single-port transceive wavelength switching feature of BiDi devices. Unstandardized marking is prone to chaotic port records and difficult later maintenance. HYTOPTODEVICE wavelength-distinguished SFP BiDi 10G 40km Transceiver supports refined port labeling to optimize high-density patch panel documentation management.
Q3: Why do intermediate cabling accessories easily trigger sudden disconnection of 40km BiDi long-distance links?
A: 40km long-reach BiDi links adopt an ultra-precise optical power budget with almost no redundant loss tolerance. Additional patch panels, connectors or unqualified fusion splices will generate extra insertion loss, directly breaking the link power balance. HYTOPTODEVICE low-loss tolerant SFP BiDi 10G 40km Transceiver adapts to multi-node structured cabling for long-span network deployment.
Q4: Why do BiDi 40km links fail on aging G.652 fiber while standard 10G LR modules work normally?
A: Early-generation G.652 optical fiber has obvious water peak attenuation characteristics in specific wavelength bands. The 1270nm and 1330nm working frequencies of BiDi modules are exactly affected, resulting in excessive signal loss and unstable transmission. HYTOPTODEVICE anti-attenuation SFP BiDi 10G 40km Transceiver optimizes spectral adaptability for legacy fiber infrastructure upgrades.
Q5: What causes asymmetric uplink and downlink transmission speed on single-fiber BiDi network links?
A: The two working wavelengths of BiDi modules have different anti-interference and anti-attenuation capabilities. Fiber aging, local bending and micro-reflection will selectively weaken a single channel, leading to unbalanced bandwidth performance. HYTOPTODEVICE dual-wavelength balanced SFP BiDi 10G 40km Transceiver ensures symmetrical uplink and downlink speed for enterprise long-distance links.
Q6: Why do data center cooling costs rise significantly after upgrading to 40km BiDi long-haul optical links?
A: 40km long-reach BiDi transceivers adopt high-power laser chips to support ultra-long-distance transmission, generating higher heat output than ordinary optical modules. Large-scale deployment increases cabinet heat load and raises HVAC system operating power consumption. HYTOPTODEVICE low-heat design SFP BiDi 10G 40km Transceiver reduces thermal load to lower data center operating costs.
Q7: Is cross-brand wavelength pairing feasible for building 40km BiDi single-fiber links?
A: Although it meets industry physical layer standards, mixing optical modules of different brands such as Cisco and Juniper will cause compatibility anomalies. Common problems include unrecognizable device information and missing DDM diagnostic data. HYTOPTODEVICE multi-brand compatible SFP BiDi 10G 40km Transceiver maintains complete telemetry data in mixed-vendor network environments.
Q8: Why do on-site maintenance teams need to reserve double types of spare optical modules for BiDi link troubleshooting?
A: BiDi single-fiber links rely on two complementary wavelength modules for paired operation. Maintenance personnel cannot use universal single-model spares and must prepare two types of wavelength modules to cope with various equipment failures. HYTOPTODEVICE standardized paired SFP BiDi 10G 40km Transceiver simplifies spare parts preparation for field operation and maintenance.
Q9: Can breakout cables be used to split a single 10G BiDi link into multiple low-speed independent service channels?
A: BiDi single-fiber transmission is a fixed point-to-point single-channel transmission mode, which does not support physical channel splitting and multi-service breakout. Using breakout cables will cause power budget exhaustion and link interruption. HYTOPTODEVICE single-channel dedicated SFP BiDi 10G 40km Transceiver is professionally designed for stable 10G single-fiber point-to-point transmission.
Q10: What is the main reason for delayed commissioning of on-site 40km BiDi long-distance links?
A: Most construction personnel are accustomed to using traditional duplex fiber jumpers for network wiring, while BiDi single-fiber links require dedicated simplex jumpers. Habitual wiring errors lead to repeated debugging and delayed project delivery. HYTOPTODEVICE easy-identification SFP BiDi 10G 40km Transceiver reduces wiring mistakes and shortens network turn-up cycles.
Q11: Why does live fiber inspection easily damage optical testing equipment during BiDi link maintenance?
A: 40km BiDi modules adopt high-power laser emission design. Without power-off processing, direct inspection of live optical fibers will output strong light, which may burn precision inspection instruments and even cause visual damage to construction personnel. HYTOPTODEVICE safe-power optimized SFP BiDi 10G 40km Transceiver reminds standard operating specifications for live fiber maintenance.
Packaging & Custom OEM Solutions
Each module ships individually sealed in ESD-safe packaging, protected from static from our warehouse to your shelf—and ready to ship on receipt of order. Volume buyers and system integrators also unlock our full OEM program: custom logos, private labeling, and branded packaging, all designed to help you build and protect your own brand.

Why Network Engineers Choose HYTOPTODEVICE
HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
- Up to 70% cost savings vs OEM, transparent pricing & flexible bulk rates, supported quality returns
- 100% real-device compatible with Cisco, Huawei,Dell,Juniper, and Arista
- ISO 9001:2015 Shenzhen factory, full lineup: 1.25G/10G/25G/40G/100G/200G/400G/800G/1.6T transceivers
- Ample stock, fast global DHL/FedEx shipping in 3–5 working days
- Free pre-sales engineering support for custom EEPROM & private label firmware
- Real switch test videos available for pre-purchase review; inspection & shipping videos provided per order
“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia
Quality Certification & Compliance
At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.
We adhere to rigorous standards for our SFP modules and network solutions:
-
ISO 9001: Certified quality management and production consistency.
-
CE & FCC: Fully compliant for seamless Global Market Access.
-
RoHS: Committed to environmental responsibility and hazardous material control.
-
Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.
Certified Quality. Global Standards. Guaranteed Performance.

Rigorous Industrial Product Testing

100% 3rd Party Compatible

Partial Test Demonstration

Others


