HYTOPTODEVICE Ciena XCVR-S40U33 Compatible SFP+ 10G BiDi 40KM Transceiver – Simplex LC Single-Mode Optic, Ciena OS Certified Drop-In Replacement, Bulk Wholesale
Product Overview
Our HYTOPTODEVICE Ciena XCVR-S40U33 Compatible SFP+ 10G BiDi 40km transceiver is single strand 10G SFP+ transceiver, built for 40km point-to-point transmission over single strand OS2 single mode fiber.
• Wavelength: Tx1330nm/Rx1270nm (Match Ciena XCVR-S40U27 standard BiDi pairing)
• Interface: Standard LC simplex connector
• Transmission Distance: Stable 40km @10Gbps SMF OS2
Compliant with Hot-Pluggable SFP+ MSA, SFF-8472,SFP-8431, IEEE 802.3ae and RoHS standards and fully DDM/DOM support, Delivering high-speed performance with optimized power efficiency, this single-strand SFP+ 10G BiDi 40km transceiver is the ideal solution for cross-campus backbones, metropolitan area network (MAN) rings, and long-range data center interconnects (DCI). We support samples, bulk wholesale and OEM private labeling, submit bulk inquiry or RFQ for competitive pricing and long-term supply contracts.
Key Technical Specifications
| Ciena Compatible |
XCVR-S40U33 |
Vendor Name |
HYTOPTODEVICE |
| Form Factor |
SFP+ |
Max Data Rate |
10.7Gbps |
| Wavelength |
TX1330nm/RX1270nm |
Max Distance |
40km |
| Connector |
Simplex LC |
Transmitter Type |
1330nm DFB |
| Cable Type |
SMF |
Receiver Type |
PIN |
| TX Power |
-1.0~+5dBm |
Receiver Sensitivity |
< -15dBm |
| Max. Power Consumption |
≤1W |
DOM/DDM |
Fully Supported |
| Protocols |
SFP+ MSA, SFF-8472, IEEE 802.3ae, RoHS Compliant |
Operation Temperature |
0 to 70°C (32 to 158°F) |
For detailed technical specifications, please refer to the Datasheet
Usage Guidelines & Operational Best Practices
• BiDi Pairing Rule: SFP‑10G‑BXD (Tx1330/Rx1270) must pair with
SFP‑10G‑BXU (Tx1270/Rx1330) at remote end. Two BXD modules will NOT form a valid link.
• Cabling Requirement: Use OS2 single‑mode simplex‑LC UPC cables only. Multimode fiber / APC connectors reduce reach and cause link issues; keep connectors clean.
• Port Notice: Install only into standard SFP+ ports. Do not force into 1G‑SFP slots. Disable transceiver‑block policy if needed on host devices.
• Environment: Run within 0‑70 °C. Avoid high‑heat, dusty, poorly ventilated rack positions.
• Hot‑swap: Supports hot‑swap; disconnect fiber before plugging / unplugging to protect optical ports.
• DDM Monitoring: Enable DDM/DOM; monitor optical power and temperature for early fault warning.
• Pre‑test Recommendation: Test sample units with real hardware before large‑scale bulk deployment.
• Laser Safety: Avoid direct eye exposure to powered optical ports; infrared laser can harm eyes.
For detailed operation instructions, please refer to the User Guide.
Full Compatibility List & Supported Network Hardware
1.Native Ciena OS Compatibility
Each factory-calibrated SFP+ 10G BiDi 40KM Transceiver passes real-machine testing on official Ciena OS. Preloaded Ciena-adapted firmware delivers zero recognition failures, no transceiver alarms and complete DDM data display. Direct swap for Ciena XCVR-S40U33 without extra configuration for metro and enterprise transport projects.
Compatible Ciena Device Series:
- Ciena 3900 Series Metro Packet Transport Platforms
- Ciena 5100 Series Edge Aggregation Switches
- Ciena Cross-Campus Core-to-Access 40km Single-Fiber Interconnection Equipment
- Ciena Enterprise Access Long-Reach Trunk Hardware
2.Multi-Brand Cross Compatibility
Built to universal SFP+ MSA standards, HYTOPTODEVICE’s Ciena-compatible SFP+ 10G BiDi 40KM Transceiver unlocks OEM vendor lock-in for hybrid multi-vendor metro networks.
- Open-Brand (Plug-and-Play): Fortinet, Ubiquiti, MikroTik, D-Link, Zyxel and other open switches
- Locked-Brand (Custom Coding): Cisco, H3C, Huawei, Dell, Juniper and more
3.Free Custom EEPROM Re-Flash Service
Complimentary permanent EEPROM rewrite for all bulk orders of SFP+ 10G BiDi 40KM Transceiver. Upgrade Ciena OS or migrate modules to other brand racks; our team re-codes firmware free of charge to maintain stable 40km single-fiber bidirectional links for evolving multi-vendor metro architectures.
Primary Application Scenarios
Optimized for 40km simplex single-mode transmission and commercial indoor cabinet environments, the SFP+ 10G BiDi 40KM Transceiver matches Ciena XCVR-S40U33 optical and OS specs with low BER and stable WDM separation. Widely applied in:
- Bulk replacement of aging Ciena XCVR-S40U33 for metro 40km single-fiber aggregation links
- Ciena metro core network upgrade with fiber-saving commercial temperature SFP+ 10G BiDi 40KM Transceiver
- Enterprise cross-building point-to-point trunk with simplex single-fiber long-reach transmission
- Campus edge bandwidth expansion using low-jitter single-fiber BiDi optics
- Custom coded modules for multi-vendor hybrid Ciena core-to-access network integration
- Commercial carrier cabinet transformation with single-fiber long-haul BiDi transceivers
Connectivity Solutions(Applications)
1.Switch-to-Switch Connectivity

2.Switch-to-NIC Connectivity

3.Core to Access (With Structured Cabling)

The Core Features
1.50% Fiber Resource Saving & Low-Cost Network Upgrade
Optimize your current network infrastructure without the high cost of laying new cables. By transmitting and receiving signals over a single strand of fiber, our 10G BiDi SFP+ transceivers help you squeeze maximum value out of your existing fiber cabling.

2.Double Your Network Capacity Instantly
Upgrade your bandwidth effortlessly. Utilizing advanced Wavelength Division Multiplexing (WDM) technology, this module allows bidirectional traffic over a single fiber strand, effectively doubling your network capacity instantly while cutting cabling costs in half.

3.Energy-Efficient 10G Connectivity for Data Centers
Designed for high-density, high-speed modern data centers, this SFP+ transceiver features an ultra-low power consumption of just 1W. Achieve stable, green, and cost-effective 10G data transmission while significantly reducing operational cooling costs.

4.Seamless Cross-Brand Interoperability
Enjoy worry-free integration into your multi-vendor environment. Every single unit undergoes rigorous compatibility testing on original brand switches to ensure seamless cross-brand interoperability. Real products, real switches, real results—Specific Compatibility Video available upon request.

5.Comprehensive Testing for Rock-Solid Reliability
Reliability is our cornerstone. From signal integrity and distance runs to extreme temperature cycles, our comprehensive testing procedure guarantees that every 10G BiDi 40km SFP+ module delivers stable, packet-loss-free performance under any network load before leaving our Test Center.

FAQ
Q1: Can I build a temporary short-range link by installing two identical 1330nm BiDi transceivers on both fiber ends?
A: Deploying matching wavelength modules on two ends cannot establish valid bidirectional data transmission. Same-band signals interfere mutually and block all optical communication completely. HYTOPTODEVICE wavelength-paired SFP+ 10G BiDi 40KM Transceiver adopts matched TX/RX band design to avoid wrong-pairing failures for temporary site interconnection.
Q2: What makes field installers frequently misconfigure BiDi transceivers during on-site deployment?
A: Generic BiDi hardware comes with miniature pull tabs and faint printed labels without color differentiation, leading to frequent wavelength mix-ups during rapid cabinet wiring. HYTOPTODEVICE color-tagged SFP+ 10G BiDi 40KM Transceiver features obvious visual identifiers to reduce field installation errors for Ciena network rollouts.
Q3: Can 40km BiDi transceivers sustain stable operation after fiber rerouting extends the total span to 42km?
A: 40km-rated BiDi optics carry a fixed maximum optical power budget with no extra tolerance for over-distance fiber layout. Any span exceeding the rated limit will trigger intermittent disconnection and unstable traffic. HYTOPTODEVICE power-budget calibrated SFP+ 10G BiDi 40KM Transceiver supports precise distance planning for construction-adjusted fiber routes.
Q4: Why does inserting an extra intermediate patch panel instantly cut off the whole BiDi long-distance link?
A: Long-reach 40km BiDi links hold minimal loss tolerance. Additional connectors, patch panels or imperfect fusion splices accumulate insertion loss and exhaust the limited power margin in one go. HYTOPTODEVICE low-loss interface SFP+ 10G BiDi 40KM Transceiver reserves extra loss headroom for multi-section structured cabling layouts.
Q5: How does a single damaged fiber core disable the whole backhaul ring network built with BiDi modules?
A: BiDi single-fiber technology merges upload and download service streams onto one fiber strand, eliminating spare physical fiber paths for fast failover. Any single fiber fault will take the entire ring offline without backup channels. HYTOPTODEVICE ring-network adaptable SFP+ 10G BiDi 40KM Transceiver helps engineers design supplementary redundant fiber architectures for core backhaul systems.
Q6: Why do 40km BiDi transceivers fail to run smoothly on legacy G.652 fiber that works flawlessly with standard 10G LR modules?
A: Older G.652 fiber generates strong water peak attenuation near the BiDi 1270/1330nm spectrum bands, creating extra per-kilometer signal loss that ordinary dual-fiber LR optics do not encounter. HYTOPTODEVICE attenuation-resistant SFP+ 10G BiDi 40KM Transceiver improves signal stability for aged single-mode fiber infrastructure upgrades.
Q7: Why do receiver error alarms pop up when testing 40km BiDi modules over a short 2km fiber jumper?
A: High-output lasers built into 40km BiDi transceivers deliver excessive optical power for short spans. Without inline attenuators, the strong light will oversaturate the receiving chip and trigger persistent hardware fault alerts. HYTOPTODEVICE high-power laser SFP+ 10G BiDi 40KM Transceiver requires matched attenuator accessories for short-distance lab testing scenarios.
Q8: Which hardware flaw creates continuous crosstalk alarms inside Ciena switch chassis loaded with BiDi modules?
A: Low-cost generic BiDi transceivers utilize poorly isolated WDM diplexer chips. Internal laser transmit signals leak across channels and disrupt adjacent receiving ports, generating constant crosstalk errors. HYTOPTODEVICE high-isolation diplexer SFP+ 10G BiDi 40KM Transceiver eliminates cross-channel signal leakage for high-density switch port deployment.
Q9: What causes noticeable increases in data center cooling overhead after migrating long-haul links to 40km BiDi optics?
A: Long-reach BiDi transceivers operate high-power laser components that produce more thermal output than regular short-range pluggables. Mass port deployment raises overall cabinet temperature and forces HVAC systems to consume extra power. HYTOPTODEVICE low-heat dissipation SFP+ 10G BiDi 40KM Transceiver lowers total thermal load to cut facility cooling expenses.
Q10: Local DDM telemetry shows normal transmit power, yet the remote transceiver receives zero optical signals — what is the root cause?
A: Onboard DDM sensors only monitor local laser output status and cannot detect fiber breakage, severe mid-span loss or reverse optical reflections along the fiber route. Hidden line faults will create mismatched local/remote optical readings. HYTOPTODEVICE full-spectrum DDM-monitored SFP+ 10G BiDi 40KM Transceiver supplies comprehensive optical data to accelerate end-to-end fiber fault troubleshooting.
Q11: Why does the built-in DDM diagnostic function stop displaying valid data after updating Ciena switch firmware?
A: System OS upgrades rewrite the internal register reading logic for third-party pluggable transceivers. Most unoptimized BiDi modules carry non-standard register tables, resulting in incomplete or scrambled diagnostic telemetry post-upgrade. HYTOPTODEVICE register-matched SFP+ 10G BiDi 40KM Transceiver retains full DDM visibility through all official switch firmware iterations.
Q12: Why does the total capital expenditure for 10G network expansion double the original budget when adopting 40km BiDi transceivers?
A: Specialized WDM diplexer chips and high-output long-reach lasers add significant component costs to BiDi hardware compared with conventional dual-fiber 10G LR transceivers. Dual wavelength stocking requirements also inflate overall procurement spending. HYTOPTODEVICE cost-optimized SFP+ 10G BiDi 40KM Transceiver balances performance and budget for large-scale enterprise network expansion projects.
Packaging & Custom OEM Solutions
Each module ships individually sealed in ESD-safe packaging, protected from static from our warehouse to your shelf—and ready to ship on receipt of order. Volume buyers and system integrators also unlock our full OEM program: custom logos, private labeling, and branded packaging, all designed to help you build and protect your own brand.

Why Network Engineers Choose HYTOPTODEVICE
HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
- Up to 70% cost savings vs OEM, transparent pricing & flexible bulk rates, supported quality returns
- 100% real-device compatible with Cisco, Huawei,Dell,Juniper, and Arista
- ISO 9001:2015 Shenzhen factory, full lineup: 1.25G/10G/25G/40G/100G/200G/400G/800G/1.6T transceivers
- Ample stock, fast global DHL/FedEx shipping in 3–5 working days
- Free pre-sales engineering support for custom EEPROM & private label firmware
- Real switch test videos available for pre-purchase review; inspection & shipping videos provided per order
“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia
Quality Certification & Compliance
At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.
We adhere to rigorous standards for our SFP modules and network solutions:
-
ISO 9001: Certified quality management and production consistency.
-
CE & FCC: Fully compliant for seamless Global Market Access.
-
RoHS: Committed to environmental responsibility and hazardous material control.
-
Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.
Certified Quality. Global Standards. Guaranteed Performance.

Rigorous Industrial Product Testing

100% 3rd Party Compatible

Partial Test Demonstration

Others


