• Brocade E1MG-EX-40 Compatible 1000BASE-EX Pluggable Transceiver  | SFP 1310nm 40km SMF Bulk Wholesale | HYTOPTODEVICE
  • Brocade E1MG‑EX‑40 pluggable transceiver from hytoptodevice
  • hytoptodevice 1000BASE‑EX 40km SMF SFP
  • hytoptodevice Brocade compatible SFP module
  • Brocade E1MG-EX-40 Compatible 1000BASE-EX Pluggable Transceiver  | SFP 1310nm 40km SMF Bulk Wholesale | HYTOPTODEVICE
  • Brocade E1MG-EX-40 Compatible 1000BASE-EX Pluggable Transceiver  | SFP 1310nm 40km SMF Bulk Wholesale | HYTOPTODEVICE
  • Brocade E1MG-EX-40 Compatible 1000BASE-EX Pluggable Transceiver  | SFP 1310nm 40km SMF Bulk Wholesale | HYTOPTODEVICE
  • Brocade E1MG‑EX‑40 pluggable transceiver from hytoptodevice
  • hytoptodevice 1000BASE‑EX 40km SMF SFP
  • hytoptodevice Brocade compatible SFP module
  • Brocade E1MG-EX-40 Compatible 1000BASE-EX Pluggable Transceiver  | SFP 1310nm 40km SMF Bulk Wholesale | HYTOPTODEVICE
  • Brocade E1MG-EX-40 Compatible 1000BASE-EX Pluggable Transceiver  | SFP 1310nm 40km SMF Bulk Wholesale | HYTOPTODEVICE

Brocade E1MG-EX-40 Compatible 1000BASE-EX Pluggable Transceiver | SFP 1310nm 40km SMF Bulk Wholesale | HYTOPTODEVICE

HYTOPTODEVICE Brocade E1MG‑EX‑40 compatible pluggable transceiver resolves third‑party module recognition errors and link alerts. 1000BASE‑EX 40km SMF performance, factory bulk supply for Brocade network hardware deployment. Support private label, custom EEPROM programming and OEM for global importers, wholesaler and distributors.
NO. Brand  Compatible P/N Transceiver Type
1 Cisco  GLC-EX-SMD SFP-G85-5LD
2 Alcatel-Lucent  SFP-GIG-LH40 SFP-G31-10LD
3 NVIDIA/Mellanox MFE1P00-EX-CM SFP-G55-80LD
4 Arista Networks SFP-1G-EX-40 SFP-G55-100LD
5 Juniper Networks  SFP-1GE-EX-40  SFP-G55-120LD
6 Huawei S-SFP-GE-LH40-SM1310  SFP-G55-160LD
7 Brocade  E1MG-EX-40
8 H3C  SFP-GE-LH40-SM1310
Description

Brocade E1MG-EX-40 Compatible 1000BASE-EX  Pluggable Transceiver | SFP 1310nm 40km SMF Bulk Wholesale | HYTOPTODEVICE

Product Overview

HYTOPTODEVICE 1000BASE‑EX pluggable transceiver delivers pin‑to‑pin compatibility for Brocade E1MG‑EX‑40. Custom‑tuned EEPROM profile bypasses Brocade platform whitelist restrictions, eliminating common third‑party module alerts and port recognition failures for out‑of‑box operation.
Operating at 1310nm over single‑mode fiber, this SFP unit delivers consistent 40km transmission, well‑suited for site‑to‑site uplinks and remote branch interconnection within Brocade‑based networks.
Each HYTOPTODEVICE transceiver goes through real‑hardware validation and thermal aging screening, delivering stable performance for project roll‑outs and volume procurement.

Key Technical Specifications 

 Brocade Compatible E1MG-EX-40 Vendor Name HYTOPTODEVICE
Form Factor SFP Max Data Rate 1.25Gbps
Wavelength 1310nm Max Distance 40km 
Connector Duplex LC Transmitter Type 1310nm DFB
Cable Type SMF Receiver Type PIN
TX Power -5.0~0dBm Receiver Sensitivity < -23.0dBm
Typical Power Consumption ≤1W Receiver Overload -1dBm
Bit Error Ratio (BER) 1E-12 DDM/DOM Support
Protocols SFF-8472 MSA Compliant, IEEE 802.3ah-2004 Operation Temperature 0 to 70°C (32 to 158°F)

Usage Guidelines & Best Practices

  • Fiber Choice: Use Single-Mode Fiber (SMF) only. Do NOT use MMF

  • Connector Match: UPC/PC polish only. Do NOT use APC.

  • Cleanliness & Dust: Keep dust caps on all unused ports and connectors at all times. Clean fiber end-faces with a optical cleaning pen before insertion; dust causes over 80% of optical link failures.

  • Optical Attenuator Required for Short Links: For testing or short-distance connections (<10 km), connect a 5dB–10dB optical attenuator to the RX port to prevent damaging the receiver.

  • Handling: Wear ESD protection. Keep fiber bend radius ≥ 30 mm.

  • Installation & Hot-Swap Rules:MSA hot-swappable. Insert/remove gently without powering down.

  • High Loss/Packet Drops: Check fiber bend radius (>30 mm); inspect optical power levels; clean optical connectors 

  • No Link: Swap TX/RX fiber connections; clean fiber end-faces; verify port settings.

     Links to the Datasheet, User Guide and Compatibility Guides are available on the product page.

Full Compatibility List and Supported Devices

1. Supported Hardware & Firmware

HYTOPTODEVICE E1MG‑EX‑40 compatible pluggable transceiver works across mainstream Brocade switch platforms and maintains stable status after firmware upgrades.
  • Brocade ICX Series: ICX 6430, ICX 6450, ICX 7250, ICX 7450
  • Brocade VDX Series: VDX 6720, VDX 6740
  • Brocade FastIron legacy enterprise switching hardware
  • Zero‑alarm operation, no manual configuration required for most deployment scenarios

2. Multi-Brand Cross Compatibility

Compliant with SFP MSA standards, this pluggable transceiver supports multi-brand cross-device interoperability. It solves single-brand limits and meets diverse optical transceiver procurement needs.

3. Free Value-Added Services

We provide full value-added services for optical transceiver bulk purchase: free sample test, custom firmware, OEM service, low MOQ wholesale and 5-year warranty to avoid project after-sales risks.


Main Application Scenarios

  • Inter‑Site Uplink: 40km SFP transceiver for cross‑campus and inter‑building fiber uplink connections
  • Brocade Hardware Refresh: Cost‑effective drop‑in replacement for aging E1MG‑EX‑40 pluggable transceivers
  • Remote Branch Networking: Gigabit long‑reach links connecting geographically separated branch offices
  • Infrastructure Renovation: Bulk deployment of HYTOPTODEVICE SFP units for fiber‑based network upgrade initiatives


Connectivity Solutions(Applications) 

1.1GbE Switch-to-Switch Connectivity
HYTOPTODEVICE zero alarm pluggable transceiver, bulk procurement for network upgrade

2.1GbE Switch to Media Converter ConnectivityHYTOPTODEVICE 1310nm 40km SMF pluggable transceiver, cost-effective bulk purchase for enterprise networking

The Core Feature

1. High-Efficiency & Low-Power 1G Data Center Interconnect

Low-power optical transceiver delivers stable 1.25Gbps transmission and 40km SMF long-reach connection. It solves high power consumption and unstable bandwidth pain points, ideal for data center bulk optical transceiver procurement.

HYTOPTODEVICE DDM supported pluggable transceiver, stable replacement for bulk deployment


2.
Host-Tested for Proven Interoperability

All optical transceivers pass real NVIDIA/Mellanox  device testing. Pre-flashed EEPROM ensures zero-alarm recognition, fixing third-party module incompatibility and link flapping for safe bulk purchase.Specific Compatibility Video available upon request.

HYTOPTODEVICE compatible pluggable transceiver, plug and play module for large-scale network projects

3.100% Factory Tested for Reliability

Every optical transceiver undergoes aging, calibration and stability tests. 0℃-70℃ wide temperature tolerance and DDM monitoring reduce network failure risks for large-scale procurement. Take a virtual tour of our Test Center to see our Quality Assurance process in action.

HYTOPTODEVICE factory‑supply 1000base-ex pluggable transceiver with 100% test


FAQ

Q1: Can third-party pluggable transceiver work without alarms on original Brocade switch devices?
A: Yes. The HYTOPTODEVICE E1MG‑EX‑40 pluggable transceiver runs customized exclusive EEPROM profiles, achieving full hardware recognition and zero-alarm stable operation on all mainstream Brocade switching devices.

Q2: Is 1G long-range pluggable transceiver compatible with 10G SFP+ dual-speed switch interfaces?
A: Yes. The HYTOPTODEVICE Brocade-compatible pluggable transceiver operates normally after manually adjusting the 10G SFP+ host port to 1Gbps working mode, realizing flexible port adaptation.

Q3: Does Brocade replacement pluggable transceiver comply with international network industry standards?

A: Yes. The HYTOPTODEVICE E1MG‑EX‑40 pluggable transceiver strictly follows IEEE 802.3z 1000BASE‑EX and SFP MSA specifications, ensuring universal cross-vendor device interoperability.

Q4: How to deploy 40km long-reach pluggable transceiver on multimode fiber network lines?

A: The HYTOPTODEVICE high-distance pluggable transceiver supports up to 550m multimode fiber transmission when matched with a professional Mode Conditioning Patch cable, effectively avoiding DMD signal distortion failure.

Q5: Why different wavelength pluggable transceiver cannot realize end-to-end network interconnection?

A: Network interconnection requires matching wavelength and fiber type. Mismatched parameters between 1310nm EX and 850nm SX pluggable transceiver will cause complete link outage of HYTOPTODEVICE E1MG‑EX‑40 modules.

Q6: Can DDM monitoring function realize real-time status detection of Brocade pluggable transceiver?

A: Yes. The HYTOPTODEVICE E1MG‑EX‑40 pluggable transceiver is equipped with full DDM/DOM intelligent monitoring, supporting real-time detection of module temperature, voltage, laser current and optical power for daily operation management.

Q7: What optical power standards ensure stable transmission of 1000BASE-EX pluggable transceiver?
A: The HYTOPTODEVICE E1MG‑EX‑40 pluggable transceiver adopts standard -5dBm ~ 0dBm transmit optical power, providing stable and reliable signal output for 40km single-mode long-distance transmission.

Q8: How to fix low receiving power and unstable signal faults of long-range pluggable transceiver?

A: Thoroughly clean fiber end faces and check cable bending and attenuation. The high-sensitivity design of HYTOPTODEVICE pluggable transceiver effectively improves weak signal reception and stabilizes long-distance links.

Q9: Are SC-LC fiber jumpers fully compatible with Brocade E1MG-EX-40 pluggable transceiver?

A: Yes. The HYTOPTODEVICE pluggable transceiver perfectly matches standard SC-LC patch cords and OS1/OS2 single-mode fiber, adapting to conventional LC interface wiring scenarios of enterprise networks.

Q10: Why APC fiber connectors cause unstable operation of gigabit pluggable transceiver?
A: APC connectors have high insertion loss, which easily triggers packet loss and signal jitter. HYTOPTODEVICE E1MG‑EX‑40 pluggable transceiver only supports standard UPC cables to ensure link stability.

Q11: What are the main causes of intermittent link flapping for long-distance pluggable transceiver?
A: Fiber surface contamination, excessive cable bending and abnormal optical power input are the main factors leading to signal flapping and unstable connection of HYTOPTODEVICE pluggable transceiver.

Q12: What temperature range guarantees normal working of commercial-grade pluggable transceiver?

A: The HYTOPTODEVICE E1MG‑EX‑40 commercial-grade pluggable transceiver maintains stable operating performance in 0℃ to 70℃, fully adapting to conventional enterprise computer room environments.

Q13: Why regular fiber cleaning is crucial for single-mode pluggable transceiver long-link transmission?

A: Single-mode fiber has ultra-fine core and strong dust sensitivity. Dust contamination will seriously affect the signal reception efficiency and transmission stability of HYTOPTODEVICE long-range pluggable transceiver.

Q14: Do bulk purchased Brocade compatible pluggable transceiver meet international safety certifications?

A: Yes. All batch-produced HYTOPTODEVICE pluggable transceiver strictly complies with CE, FCC, RoHS and REACH certification standards, supporting safe large-scale enterprise network deployment.

Q15: Will low-temperature working environment affect the service life and performance of pluggable transceiver?

A: Yes. Long-term operation below 0℃ will cause laser power offset, reduce transmission accuracy and weaken the overall working stability of HYTOPTODEVICE E1MG‑EX‑40 pluggable transceiver.

Packaging Options & Custom‑Packaging Solutions

Every transceiver module gets reliable ESD‑safe packaging out of the box. Standard packing is ready for immediate shipment, while custom‑printed packaging with your logo is available for bulk orders.


Why Network Engineers Choose HYTOPTODEVICE

HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.

  • 100% MSA-compliant modules with Cisco, Huawei,Dell,Juniper, and Arista compatibility
  • ISO 9001:2015 certified manufacturing facility in Shenzhen
  • Average lead time of 3–5 business days with DHL/FedEx express options
  • Dedicated pre-sales engineering support for custom configurations
  • Actual hardware,actual switches,actual results.we publish compatibility test video,eliminate compatibility anxiety. you can watch before you buy. 
  • We can provide inspection and shipping videos to make you feel as if you are right here with the product.


"We replaced 200 Cisco-branded SFPs with HYTOPTODEVICE equivalents across our spine layer — zero compatibility issues, 40% cost reduction."— Network Architect, Tier-2 ISP, Germany


Quality Certification & Compliance

 At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final inspection, our processes ensure global compliance and reliability.

We adhere to rigorous standards for our SFP modules and network solutions:

  • ISO 9001: Certified quality management and production consistency.

  • CE & FCC: Fully compliant for seamless Global Market Access.

  • RoHS: Committed to environmental responsibility and hazardous material control.

  • Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.

Certified Quality. Global Standards. Guaranteed Performance.




Rigorous Industrial Product Testing

   

100% 3rd Party Compatible

Partial Test Demonstration

  • Brocade E1MG-EX-40 Compatible 1000BASE-EX Pluggable Transceiver  | SFP 1310nm 40km SMF Bulk Wholesale | HYTOPTODEVICE
  • Brocade E1MG‑EX‑40 pluggable transceiver from hytoptodevice
  • hytoptodevice 1000BASE‑EX 40km SMF SFP
  • hytoptodevice Brocade compatible SFP module
  • Brocade E1MG-EX-40 Compatible 1000BASE-EX Pluggable Transceiver  | SFP 1310nm 40km SMF Bulk Wholesale | HYTOPTODEVICE
  • Brocade E1MG-EX-40 Compatible 1000BASE-EX Pluggable Transceiver  | SFP 1310nm 40km SMF Bulk Wholesale | HYTOPTODEVICE

Download