• Brocade E1MG-1G-BXD-120 Compatible BiDi Transceiver Module 120km | 1000BASE-BX-D Tx1550Rx1490 Simplex LC Bulk Wholesale | HYTOPTODEVICE
  • Brocade E1MG-1G-BXD-120 Compatible BiDi Transceiver Module 120km | 1000BASE-BX-D Tx1550Rx1490 Simplex LC Bulk Wholesale | HYTOPTODEVICE
  • HYTOPTODEVICE plug‑and‑play compatible BiDi SFP optical transceiver 120km SMF 1.25G
  • hytoptodevice offer 1000BASE-BX-U bidi transceiver 120km SMF 1.25g
  • Brocade E1MG-1G-BXD-120 Compatible BiDi Transceiver Module 120km | 1000BASE-BX-D Tx1550Rx1490 Simplex LC Bulk Wholesale | HYTOPTODEVICE
  • Brocade E1MG-1G-BXD-120 Compatible BiDi Transceiver Module 120km | 1000BASE-BX-D Tx1550Rx1490 Simplex LC Bulk Wholesale | HYTOPTODEVICE
  • HYTOPTODEVICE plug‑and‑play compatible BiDi SFP optical transceiver 120km SMF 1.25G
  • hytoptodevice offer 1000BASE-BX-U bidi transceiver 120km SMF 1.25g

Brocade E1MG-1G-BXD-120 Compatible BiDi Transceiver Module 120km | 1000BASE-BX-D Tx1550Rx1490 Simplex LC Bulk Wholesale | HYTOPTODEVICE

Looking for cost-effective bidi transceiver module replacement? HYTOPTODEVICE offers Brocade E1MG-1G-BXD-120 compatible bidi transceiver module, 1000BASE-BX-D Tx1550nm/Rx1490nm simplex LC, 120km single-mode fiber transmission. Buy wholesale bidi transceiver module with full compatibility, private label, custom EEPROM and stable performance for Brocade network project upgrades.
NO. Brand  Compatible P/N Transceiver Type
1 Cisco GLC-BX120-D SFP-G45-1BLD
2 Juniper  SFP-GE120KT15R14   SFP-G43-10LD
3 Brocade E1MG-1G-BXD-120  SFP-G43-20LD
4 Dell  SFP-GE-BX120D-1550  SFP-G53-10LD
5 Extreme MGBIC-BX120-D  SFP-G53-20LD
6 H3C   SFP-GE-120-SM1550-A  SFP-G43-40LD
7 HPE H3C   SFP-1G-BXD-120  SFP-G53-40LD
8 Netgear  SFP-GE-BX120-D SFP-G54-80LD
Description

Brocade E1MG-1G-BXD-120 Compatible BiDi Transceiver Module 120km | 1000BASE-BX-D Tx1550Rx1490 Simplex LC Bulk Wholesale | HYTOPTODEVICE


Product Overview

HYTOPTODEVICE manufactures high-performance bidi transceiver module as a drop-in replacement for Brocade E1MG-1G-BXD-120. Operating at Tx1550nm/Rx1490nm with simplex LC connector, this 1000BASE-BX-D optic delivers stable 1.25G single-fiber transmission up to 120km on OS1/OS2 single-mode fiber. Pre-flashed EEPROM works seamlessly with Brocade hardware without system alarms. Bulk wholesale, custom EEPROM and private label services are available for system integrators and distributors.

Key Technical Specifications

Brocade Compatible   E1MG-1G-BXD-120  Vendor Name HYTOPTODEVICE
Form Factor SFP Max Data Rate 1.25Gbps
Wavelength TX1550nm/RX1490nm Max Distance 120km 
Connector Simplex LC Transmitter Type 1550nm DFB
Cable Type SMF Receiver Type APD
TX Power 1~5dBm Receiver Sensitivity < -32.0dBm
Protocols SFF-8472 MSA Compliant, IEEE 802.3ah-2004 Operation Temperature 0 to 70°C (32 to 158°F)

For detailed technical specifications, please refer to the Datasheet

Usage Guidelines & Operational Best Practices

  • Complementary Pairing: BiDi transceivers must be deployed in matched pairs (e.g., TX1490/RX1550 with TX1550/RX1490). Mismatched wavelengths cannot establish a link.

  • Fiber Choice: Use Single-Mode Fiber (SMF) only. Do NOT use MMF.

  • Connector Match: Simplex LC (UPC/PC polish only). Do NOT use Duplex LC or APC.

  • Laser Safety: Class 1 Laser. Never look directly into optical ports or fiber end-faces.

  • ESD Safety: Wear an anti-static wrist strap before handling the transceiver.

  • Cleanliness & Dust: Keep dust caps installed on all unused ports. Clean fiber connectors with an optical cleaning pen before insertion; dust causes over 80% of link failures.

  • Optical Attenuator Required: For short-distance testing or links (<30 km), connect a 10dB–15dB attenuator to the RX port to prevent receiver damage.

  • Installation & Hot-Swap: MSA compliant. Insert and remove gently without powering down the device.

  • High Loss / Packet Drops: Ensure fiber bend radius exceeds 30 mm, inspect optical power levels, and clean connectors.

  • No Link: Verify complementary BIDI wavelength pairing requirement; clean Simplex LC end-faces; check port speed configuration.

For detailed operation instructions, please refer to the User Guide.


Full Compatibility List and Supported Devices


1. Supported Hardware & Firmware

This compatible bidi transceiver module adopts Brocade customized EEPROM to eliminate unrecognized module alarms and warning logs, running stably with all official Brocade firmware versions.
  • Brocade FastIron Series: FCX624, FCX648, SX800, SI1000
  • Brocade ICX Series Switches: ICX6430, ICX6450, ICX6610, ICX7150, ICX7250
  • Brocade VDX Series Switches: VDX6740, VDX6940
  • Universal Compatibility: All Brocade network devices with standard 1.25G SFP gigabit ports

2. Multi-Brand Cross Compatibility

Built on universal MSA specifications, this BIDI TRANSCEIVER MODULE supports cross-brand interoperability with H3C, MikroTik, Dell, Netgear, Cisco hardware. As your trusted BIDI TRANSCEIVER MODULE supplier, we provide custom EEPROM programming to solve mixed-brand network deployment headaches.

3. Free Value-Added Services

We provide professional customization for bulk Bidi sfp transceiver module orders, including firmware adaptation and custom labeling, meeting personalized procurement demands for compatible optical modules.

Primary Application Scenarios

  • Enterprise metro cross-building single-fiber networking and long-distance inter-office links
  • ISP operator dark fiber leasing service and long-distance backbone transmission construction
  • Remote branch, park and factory long-haul network backhaul deployment
  • Large-scale video surveillance system long-distance single-fiber aggregation uplink
  • Old network upgrade and reconstruction projects with limited fiber core resources

Connectivity Solutions (Applications)

1.1GbE Switch-to-Switch Connectivity
HYTOPTODEVICE BiDi  transceiver MODULE for single‑fiber point‑to‑point enterprise deployment
2.1GbE Switch to Media Converter Connectivity
HYTOPTODEVICE 120km BiDi transceiver MODULE for campus long‑haul gigabit inter‑building links
3.1G Structured Cabling
HYTOPTODEVICE single strand BIDI SFP module for ISP FTTH and remote branch backhaul


Core Product Features

1. BiDi SFP: Maximizing Fiber Efficiency

Replaces traditional dual-fiber setups with single-strand WDM multiplexing, fully unlocking unused fiber capacity and streamlining bulk network upgrades.
hytoptodevice 120km single fiber BiDi optic, reliable manufacturer for bidi transceiver module

2.Double Your Capacity, Zero Extra Cabling

Transmit and receive on a single strand. By leveraging integrated WDM technology, this BiDi SFP module eliminates redundant wiring and slashes expansion costs for Cisco campus networks.

Tx1550 Rx1490 simplex LC bidi transceiver module from hytoptodevice

3. Efficient 1G Ethernet, Half the Fiber

Maximize data center efficiency. Delivers reliable Gigabit performance while lowering power consumption and halving fiber strand requirements.

hytoptodevice bulk wholesale BIDI transceiver MODULE with low power consumption and high-efficiency

4. Plug-and-Play Guaranteed Compatibility

Factory pre-programmed professional Brocade EEPROM data, no illegal module prompts, no port shutdown, compatible with all mainstream Brocade switch firmware. Support hot plug and play, no complicated configuration, greatly improving on-site deployment efficiency.Specific Compatibility Video available upon request.

HYTOPTODEVICE compatible  bidi transceiver module 120km SMF

5. 100% Tested, Zero-Defect Guaranteed
Maximum network uptime, zero surprises. Every BIDI SFP module undergoes rigorous physical testing in our Test Center before shipping to deliver rock-solid reliability out of the box.

HYTOPTODEVICE BiDi transceiver module full aging test for stable 120km single‑fiber operation


Frequently Asked Questions 

Q1: Can I purchase this 120km bidi transceiver module for installation on Brocade 10G SFP+ ports? A: Yes, this HYTOPTODEVICE bidi transceiver module is backward compatible with most Brocade SFP+ ports. Since auto-negotiation cannot downshift from 10G to 1G, you need to manually lock the port speed to 1Gbps to ensure stable link operation.

Q2: Is it feasible to deploy the bought bidi transceiver module at 100Mbps low speed for legacy network renovation projects? A: This bidi transceiver module supports automatic speed adaptation, but low-speed operation is not recommended. Some old Brocade devices will have link jitter and abnormal flashing problems when running at 100Mbps, which affects project network stability.

Q3: Do I need to upgrade device firmware after buying Brocade compatible bidi transceiver module? A: No firmware upgrade is required for normal use. Our pre-calibrated EEPROM data perfectly matches Brocade official devices. Only extremely old firmware versions may have identification anomalies, solving the compatibility pain points of project module access failure.

Q4: Do I need to purchase paired modules when sourcing bidi transceiver module for single-fiber network links? A: Yes, single-fiber BiDi transmission relies on wavelength pairing. This Tx1550/Rx1490 bidi transceiver module must be used with the opposite Tx1490/Rx1550 module to complete two-way signal transmission and build a valid network link.

Q5: What deployment mistakes should be avoided when using wholesale bidi transceiver module with fiber splitters? A: It is impossible to connect this bidi transceiver module with traditional duplex dual-fiber SFP via a splitter. BiDi single-fiber wavelength multiplexing mechanism is completely different from duplex modules, and wrong connection will lead to total link failure.

Q6: What core optical components are equipped in industrial-grade 120km bidi transceiver module for long-distance projects? A: HYTOPTODEVICE 120km bidi transceiver module adopts professional DFB laser and high-sensitivity APD receiver. Compared with ordinary PIN receivers, APD has stronger signal reception sensitivity, which is the core guarantee for stable 120km ultra-long-distance transmission.

Q7: Do bulk purchased bidi transceiver module need optical attenuators for short-distance on-site deployment?
A: Yes, attenuator matching is necessary for links below 30km. The high transmit power of 120km long-distance bidi transceiver module will cause receiver saturation and bit error in short-distance transmission, and 10-15dB attenuator can effectively protect the module.

Q8: Will on-site aging fiber and splicing loss affect the transmission distance of purchased bidi transceiver module?
A: Yes, aged G.652 fiber and excessive splicing loss will increase line attenuation, reduce the optical power budget of the bidi transceiver module, shorten the actual transmission distance, and even cause link disconnection in extreme cases.

Q9: What signal quality risks should be noted for 120km long-distance links when purchasing bidi transceiver module?
A: At 1.25G low rate, chromatic dispersion has limited impact on the bidi transceiver module link. However, excessive dispersion in ultra-long-distance transmission will cause pulse broadening and random bit errors, which needs to be considered in project line planning.

Q10: Why do Brocade devices display inaccurate optical power data after installing purchased bidi transceiver module?
A: The built-in wavelength filtering mechanism of BiDi optics will cause tiny deviation in DDM monitoring data. The displayed RX power value is slightly inaccurate individually, but it will not affect the actual network link stability and project operation.

Q11: Is overheating a common quality problem for bulk ordered 120km bidi transceiver module?
A: No. Although long-distance modules have higher transmit power, HYTOPTODEVICE optimized the power consumption structure of the bidi transceiver module. The actual heat generation is extremely low, and there is no overheating failure in dense cabinet long-term operation.

Q12: Will high-temperature cabinet environment shorten the service life of project-purchased bidi transceiver module?
A: Long-term over-temperature operation will accelerate laser aging. All our bidi transceiver module have passed high and low temperature burn-in tests, with stable quality and long service life, effectively avoiding frequent module replacement losses for engineering projects.

Q13: Can Brocade switch power supply support full-port deployment of multiple 120km bidi transceiver module?
A: Each HYTOPTODEVICE bidi transceiver module has low power consumption ≤1W. Most mainstream Brocade switch power supplies support full-slot deployment. Buyers only need to simply calculate the total power budget to complete batch deployment.

Q14: How to guarantee the quality of bulk wholesale bidi transceiver module for network engineering projects?
A: Every bidi transceiver module shipped by HYTOPTODEVICE undergoes independent optical power test, sensitivity detection and full-rate burn-in test. We eliminate defective products from the source to ensure 120km performance compliance of bulk orders.

Q15: Are wholesale bidi transceiver module compliant with international standards for global project bidding and procurement?
A: All our bidi transceiver module strictly comply with SFP MSA industry specifications and RoHS environmental protection standards, with complete qualification certificates, meeting the procurement and bidding requirements of global network engineering projects.

Packaging & Custom OEM Solutions

Individually sealed in ESD-safe packaging and ready to ship. We offer tailored OEM solutions—including custom logos and private labeling—to support high-volume distributors,wholesaler and system integrators.
HYTOPTODEVICE sfp-10g-sr optical transceiver module custom package

Why Network Engineers Choose HYTOPTODEVICE

HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.

  • 100% hardware-tested compatibility with Cisco, Huawei,Dell,Juniper, and Arista
  • ISO 9001:2015 certified manufacturing facility in Shenzhen
  • Full product range coverage:1.25G/10G/25G/40G/100G/200G/400G/800G/1.6T
  • In-stock supply & fast global shipping, average lead time of 3–5 business days with DHL/FedEx express options
  • Dedicated pre-sales engineering support for custom configurations
  • Actual hardware,actual switches,actual results.we publish compatibility test video,eliminate compatibility anxiety. you can watch before you buy. 
  • We can provide inspection and shipping videos to make you feel as if you are right here with the product.
  • Private Label support - EEPROM / firmware customization support

“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia

Quality Certification & Compliance

 At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.

We adhere to rigorous standards for our SFP modules and network solutions:

  • ISO 9001: Certified quality management and production consistency.

  • CE & FCC: Fully compliant for seamless Global Market Access.

  • RoHS: Committed to environmental responsibility and hazardous material control.

  • Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.

Certified Quality. Global Standards. Guaranteed Performance.




Rigorous Industrial Product Testing

   

100% 3rd Party Compatible

Partial Test Demonstration

  • Brocade E1MG-1G-BXD-120 Compatible BiDi Transceiver Module 120km | 1000BASE-BX-D Tx1550Rx1490 Simplex LC Bulk Wholesale | HYTOPTODEVICE
  • Brocade E1MG-1G-BXD-120 Compatible BiDi Transceiver Module 120km | 1000BASE-BX-D Tx1550Rx1490 Simplex LC Bulk Wholesale | HYTOPTODEVICE
  • HYTOPTODEVICE plug‑and‑play compatible BiDi SFP optical transceiver 120km SMF 1.25G
  • hytoptodevice offer 1000BASE-BX-U bidi transceiver 120km SMF 1.25g

Download