Netgear AGM732F-40 Compatible 1000BASE-EX SFP 1310nm 40km DDM Duplex LC/UPC SMF Optical Transceiver Module

The HYTOPTODEVICE AGM732F-40 compatible SFP is rigorously tested for compatibility with:

• Netgear M4250 / M4300 / M4500 Series: Ideal for long-distance AV-over-IP backhaul.

• Netgear ProSafe Managed Series: M4100, M5300, M7100, M7300.

• Netgear Smart Managed Pro: GS724T, GS728TP, GS752TX, MS510TX.

• Netgear Industrial Series: TI-G102, TI-G162 (Standard temp slots).

• Netgear Media Converters: TFC-1000 series with SFP interface.

• Campus-to-Campus Networking: Linking remote university buildings or corporate branches up to 40km apart without signal degradation.

• Pro AV Extension: Driving 1G video-over-IP signals across large city-wide venues or outdoor installations.

• Metropolitan Area Networks (MAN): Providing high-stability fiber uplinks for municipal or regional government networks.

FAQ for Netgear AGM732F-40 Compatible SFP Transceiver:

Q1: Is the AGM732F-40 an official Netgear part number? A: Netgear officially markets the AGM732F for 10km. The AGM732F-40 is the industry-standard designation for the 40km compatible version. Our module is custom-coded to ensure Netgear switches recognize it as a high-power long-reach transceiver.

Q2: Does this 40km module support DDM/DOM? A: Absolutely. It includes full Digital Diagnostic Monitoring (DDM), allowing you to monitor real-time metrics such as laser temperature, supply voltage, and optical power via the Netgear web management dashboard.

Q3: Can I use this in an SFP+ (10G) port? A: Yes. Most Netgear 10G SFP+ ports are backward compatible with 1G SFP modules. The switch will automatically adjust the port speed to 1000Mbps.

Q4: Do I need an optical attenuator for short fiber runs? A: Yes. For fiber links shorter than 5km, we recommend using a 10dB LC optical attenuator. This protects the sensitive receiver from the high-power 1310nm laser designed for 40km distances.

Q5: Netgear AGM732F-40 not working？ A:Follow these quick steps:

1. Check DDM: Run show transceiver detail on the switch. Look for Low Rx Power or faults.

2. Clean & Reseat: Clean the LC fiber connectors and firmly re-seat the SFP module.

3. Verify Fiber: Ensure you are using a single-mode (SMF) patch cable. Check for bends or breaks.

4. Swap Test: If possible, test the SFP in a different port or swap it with a known-working module to isolate the fault.

If DDM shows "Low Tx Power" or "Fault", the module is likely defective and needs replacement

Quality Assurance：Your Trusted Optical Transceiver Source

HYTOPTODEVICE is a vertically integrated manufacturer of high-performance optical transceivers. By controlling core materials at the source, we ensure every SFP module meets the highest standards of reliability and customization.

• Vertical Integration: In-house core material production ensures a stable, self-sufficient supply chain for all optical modules.

• Total Traceability: End-to-end oversight from raw components to final transceiver assembly guarantees 100% controllability.

• Bespoke Solutions: Expert-led R&D provides customized SFP transceiver designs tailored to your specific technical needs.

• 24-Hour Response: Our technical team guarantees a primary response to any inquiry or quality concern within 24 hours.

Carrier-Grade Quality. Factory-Direct Control. Rapid Response.

Quality Certification & Compliance：

At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final inspection, our processes ensure global compliance and reliability.

We adhere to rigorous standards for our SFP modules and network solutions:

• ISO 9001: Certified quality management and production consistency.

• CE,UL & FCC: Fully compliant for seamless Global Market Access.

• RoHS: Committed to environmental responsibility and hazardous material control.

• Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.

Certified Quality. Global Standards. Guaranteed Performance.

Rigorous Industrial Product Testing：

   

100% 3rd Party Compatible：

Partial Test Demonstration: