| NO. | Brand | Compatible P/N | Transceiver Types |
| 1 | Cisco | GLC-FE-100FX-RGD | SFP-M31-10LD |
| 2 | Cisco | GLC-FE-100FX | SFP-M31-40LD |
| 3 | Brocade | E1MG-100FX-OM | SFP-M55-80LD |
| 4 | Juniper | EX-SFP-1FE-FX | SFP-M55-1BLD |
| 5 | H3C | SFP-FE-SX-MM1310-A | SFP-M55-1CLD |
| 6 | HPE(H3C) | JD102A | |
| 7 | HPE(Procurve) | J9054B | |
| 8 | Palo Alto Networks | PAN-SFP-100BASE-FX | |
| 9 | Extreme | MGBIC-LC04 | |
| 10 | D-Link | DEM-211 |
| Extreme Compatible | MGBIC-LC04 | Vendor Name | HYTOPTODEVICE |
| Form Factor | SFP | Max Data Rate | 100Mbps |
| Wavelength | 1310nm | Max Distance | 2KM |
| Connector | Duplex LC | Transmitter Type | FP 1310nm |
| Cable Type | MMF | Receiver Type | PIN |
| TX Power | -18~-10dBm | Receiver Sensitivity | < -26.0dBm |
| Power Consumption | ≤1W | Receiver Overload | -8.0dBm |
| Protocols | IEEE802.3ab, GR-468, MSA Compliant | Operation Temperature | 0 to 70°C (32 to 158°F) |
Usage Guidelines & Best Practices
Fiber & Port Matching
Use standard 50/125µm or 62.5/125µm duplex multimode fiber (MMF) with LC-PC/UPC connectors. Single-mode fiber is not supported and will fail to reach 2km. Ensure the SFP port supports 100Mbps mode before insertion.
Installation & Hot-Swap Rules
Supports MSA-compliant hot-swapping. Insert/remove gently without powering down the device. Keep dust caps on unused LC ports and avoid frequent re-plugging.
Link Loss Budget
Offers a 8–16dB link budget for 2km reach (including connectors/splices). If link flapping occurs, inspect and clean optical interfaces.
Operating Environment
Commercial grade: 0°C to 70°C in indoor environments. For outdoor, high temperature, or harsh environments, select Industrial Grade (-40°C to 85°C). Keep away from extreme moisture and dust for long-term stability.
Real-Time Monitoring (DDM)
Use integrated SFF-8472 DDM to monitor Tx/Rx power, temperature, and voltage in real time to prevent sudden outages.
Bulk Deployment
Standardize fiber types and port settings across enterprise LAN or industrial networks for consistent performance.






“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia
Quality Certification & Compliance
At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.
We adhere to rigorous standards for our SFP modules and network solutions:
ISO 9001: Certified quality management and production consistency.
CE & FCC: Fully compliant for seamless Global Market Access.
RoHS: Committed to environmental responsibility and hazardous material control.
Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.
Certified Quality. Global Standards. Guaranteed Performance.






