• Cisco GLC-TA Compatible 10/100/1000BASE-T SFP SGMII Copper 100m RJ-45 Transceiver Module | HYTOPTODEVICE
  • Cisco GLC-TA Compatible 10/100/1000BASE-T SFP SGMII Copper 100m RJ-45 Transceiver Module | HYTOPTODEVICE
  • Cisco GLC-TA Compatible 10/100/1000BASE-T SFP SGMII Copper 100m RJ-45 Transceiver Module | HYTOPTODEVICE
  • Cisco GLC-TA Compatible 10/100/1000BASE-T SFP SGMII Copper 100m RJ-45 Transceiver Module | HYTOPTODEVICE
  • Cisco GLC-TA Compatible 10/100/1000BASE-T SFP SGMII Copper 100m RJ-45 Transceiver Module | HYTOPTODEVICE
  • Cisco GLC-TA Compatible 10/100/1000BASE-T SFP SGMII Copper 100m RJ-45 Transceiver Module | HYTOPTODEVICE
  • Cisco GLC-TA Compatible 10/100/1000BASE-T SFP SGMII Copper 100m RJ-45 Transceiver Module | HYTOPTODEVICE
  • Cisco GLC-TA Compatible 10/100/1000BASE-T SFP SGMII Copper 100m RJ-45 Transceiver Module | HYTOPTODEVICE
  • Cisco GLC-TA Compatible 10/100/1000BASE-T SFP SGMII Copper 100m RJ-45 Transceiver Module | HYTOPTODEVICE
  • Cisco GLC-TA Compatible 10/100/1000BASE-T SFP SGMII Copper 100m RJ-45 Transceiver Module | HYTOPTODEVICE

Cisco GLC-TA Compatible 10/100/1000BASE-T SFP SGMII Copper 100m RJ-45 Transceiver Module | HYTOPTODEVICE

Buy Cisco GLC-TA compatible RJ45 transceiver directly from HYTOPTODEVICE factory. This 10/100/1000BASE-T SFP SGMII copper RJ45 transceiver supports 100m Cat5e/Cat6 links for Cisco switches. Auto-negotiation triple speed, bulk wholesale, sample available, low MOQ for RJ45 transceiver buyers and network integrators.
NO. Brand  Compatible P/N Transceiver Type
1 Cisco  GLC-TA SFP-GE-T
2 Alcatel-Lucent  iSFP-GIG-T SFP-GIG-T 
3 Brocade  E1MGTX-A GLC-TE-I
4 Extreme 10065 SFP-10G-T-30
5 Juniper Networks EX-SFP-1GE-T SFP-10G-T-30I 
6 MikroTik  S-RJ01  SFP-10G-T-80
7 Ciena XCVR-B00CRJ SFP-10G-T-100
8 Finisar  FCLF8522P2BTL

Description

Cisco GLC-TA Compatible 10/100/1000BASE-T SFP SGMII Copper 100m RJ-45 Transceiver Module | HYTOPTODEVICE


Product Overview

HYTOPTODEVICE Cisco GLC-TA compatible RJ45 transceiver delivers flexible triple-speed 10/100/1000BASE-T Ethernet transmission over twisted-pair copper cabling. This hot-swappable SFP copper module with RJ45 connector supports up to 100-meter links over Cat5e/Cat6 cable and uses SGMII host interface for seamless communication with Cisco network switches and routers. Built to IEEE 802.3 & SFP MSA standards, pre-programmed EEPROM enables plug-and-play recognition under Cisco IOS without unsupported transceiver warning logs. This RJ45 transceiver supports auto-negotiation for 10Mbps,100Mbps and 1000Mbps speeds. HYTOPTODEVICE manufactures this RJ45 transceiver for network distributors, system integrators and bulk purchasers.

Key Technical Specifications

   Cisco  Compatible GLC-TA Vendor Name HYTOPTODEVICE
Form Factor SFP  Data Rate 10/100/1000Mbps
Connector RJ-45 Cable Distance 100m
Media Copper Cable Type Cat 5e/6/6a (UTP)
Max. Power Consumption ≤1.2W DDM Support YES
Protocols MSA Compliant, IEEE STD 802.3 and 802.3ab Operation Temperature 0 to 70°C (32 to 158°F)

  For detailed technical specifications, please refer to the Datasheet


Usage Guidelines & Best Practices

1. Cabling Requirement

  • Standard: Cat5e or Cat6 twisted-pair cable is required to achieve full 100-meter Gigabit performance.

  • Note: Standard Cat5 cable may limit link stability at full 1G speed and is not recommended.

2. Hot-Plug Support

  • Live Insertion: The SFP RJ45 transceiver supports live insertion and removal.

  • Precaution: Avoid repeated hot swapping under continuous heavy traffic loads to ensure optimal hardware longevity.

3. Thermal Management

  • Heat Dissipation: This 1Gbps copper module generates mild heat during operation.

  • Deployment Advice: Verify the switch thermal budget and ensure adequate ventilation before fully populating all SFP ports.

4. Speed Limitation

  • Fixed Rate: This RJ45 transceiver operates at a fixed 1000Mbps speed only.

  • Compatibility Warning: It cannot auto-negotiate down to 100Mbps or 10Mbps. The connected peer device must support 1G speed to successfully establish a link.

5. Storage & Maintenance

  • Storage Environment: Keep unused transceivers stored in dry, ESD-safe packaging.

  • Dust Protection: Always fit dust caps onto the RJ45 port when the module is not in service.

For detailed operation instructions, please refer to the User Guide.

Full Compatibility List & Firmware Adaptation

1. Validated Target Hardware & Firmware

This 10/100/1000BASE-T copper SFP module uses GLC-TA matched EEPROM coding for seamless plug-and-play detection without transceiver warning alerts. Every unit passes hardware validation and burn-in testing before factory shipment:
  • Cisco Catalyst Switches: C9200, C9300, C9400, C9500, WS-C3650, WS-C3850
  • Cisco IE Industrial Switches: IE3300, IE3400, IE3500
  • Cisco Routers & ISR Series: ISR4000, ISR900
  • Any Cisco hardware fitted with standard SFP SGMII ports supporting 10/100/1000BASE-T
 Important note: This copper SFP module supports auto-negotiation 10/100/1000Mbps triple speed.

2. Multi‑Brand Cross Interoperability

Built on SFP MSA and IEEE industry standards, this RJ45 SFP Transceiver module also works with Fortinet, Dell, Extreme and other mainstream network hardware, suitable for mixed-brand enterprise and campus network renovation projects.

3.Value-Added Services

HYTOPTODEVICE provides free custom EEPROM programming, pre-sales technical consultation, test sample support, custom labeling and packaging services for wholesalers, integrators and bulk buyers working on 1000BASE-T SFP copper deployments.


Primary Application Scenarios

  • Enterprise wiring closet triple-speed LAN connections with RJ45 transceiver
  • Rack to rack short-distance 10/100/1000BASE-T RJ45 transceiver uplink deployment
  • Switch to server NIC short copper patch links
  • Legacy Cisco network upgrades converting SFP SGMII slots to RJ45 ports
  • Office LAN, IP camera and VoIP phone links requiring flexible speed auto-negotiation

Connectivity Solutions(Applications)

1. 1G to 1G for Switch-Switch

2.1G Connectivity with Switch-NIC


3.1G Structured Cabling Connectivity



The Core Features

1.Low power design for reliable 1G copper connectivity.

These low-power RJ45 SFP transceivers deliver stable 1G copper connectivity, perfectly suited for Gigabit Ethernet deployments in data centers.
1000BASE-T SFP transceiver, low power, 1G copper connectivity for data center Gigabit Ethernet networking


2.Tested in Host Devices for Proven Interoperability

Every RJ-45 copper SFP transceiver module passes interoperability validation on target switch firmware, offering plug-and-play operation with no unrecognized transceiver alert messages. Specific Compatibility Video available upon request.

1000BASE-T SFP transceiver, fully tested on host devices for proven interoperability with mainstream network hosts

3.Comprehensive quality management and inspection

Each RJ45 SFP Transceiver Module must go through burn-in cycle and full functional verification before factory shipment, guaranteeing reliable performance for H3C enterprise network rollout and campus network refresh projects.Curious how? Tour the Test Center.
000BASE-T SFP transceiver with comprehensive quality management and multi-stage inspection for reliable performance


FAQ

Q1: Can this RJ45 transceiver automatically negotiate different speeds between 10M,100M and 1000M?

A: Yes, this RJ45 transceiver supports auto-negotiation for 10/100/1000BASE-T. HYTOPTODEVICE Cisco GLC-TA compatible RJ45 transceiver automatically matches the speed of connected peer devices over Cat5e/Cat6 cabling. It brings flexible deployment for mixed-speed legacy LAN environments where gigabit and fast ethernet devices coexist.

Q2: Do I need SGMII support on the host Cisco switch to run this RJ45 transceiver properly?

A: Yes, host hardware must provide SGMII interface to operate this RJ45 transceiver. This Cisco compatible RJ45 transceiver relies on SGMII to transfer signals between switch PHY and copper transceiver. The module cannot work if the SFP port only supports 1000BASE-X without SGMII.

Q3: What cable types are acceptable to reach the full 100m distance for this RJ45 transceiver?

A: Cat5e or Cat6 twisted pair cables are required for full 100m reach of this RJ45 transceiver. HYTOPTODEVICE RJ45 transceiver follows IEEE 802.3 standard, and older Cat5 cable may cause signal attenuation, crosstalk and unstable link when running near maximum distance. Cat6 / Cat6a is recommended: it provides larger margin and superior anti-interference performance, and supports future network upgrades to 2.5G/10G (Cat6 supports 2.5G/5G, Cat6a supports 10G).

Q4: Will this RJ45 transceiver work for cross-brand connections between different vendor switches?

A: Yes, this RJ45 transceiver supports multi-brand interoperability under IEEE and SFP MSA standards. HYTOPTODEVICE Cisco GLC-TA compatible RJ45 transceiver can connect switches from different brands, as long as both sides have SGMII SFP ports and support 10/100/1000BASE-T.

Q5: Is MDI/MDIX auto crossover built inside this RJ45 transceiver?

A: Yes, this RJ45 transceiver includes auto MDI/MDIX function. You can use straight-through patch cables directly without crossover cables for switch-to-switch or switch-to-server connections. This feature simplifies on-site cabling work for LAN installers deploying HYTOPTODEVICE RJ45 transceiver.

Q6: What power consumption should I expect when installing multiple RJ45 transceiver in a dense Cisco switch chassis?

A: Each RJ45 transceiver consumes typical ~1.05W power. Low power design minimizes heat buildup on high-density switch ports. For chassis switches, you can calculate total power budget easily when you deploy multiple HYTOPTODEVICE RJ45 transceiver in all available SFP slots.

Q7: Can I use this RJ45 transceiver to connect IP cameras and VoIP phones in enterprise LAN?

A: Yes, this RJ45 transceiver works perfectly for IP camera and VoIP phone LAN links. The triple-speed auto-negotiation can adapt to 100M for legacy cameras and 1G for newer devices. HYTOPTODEVICE RJ45 transceiver converts SFP SGMII port to standard RJ45 port to connect these end devices.

Q8: Does this RJ45 transceiver support DDM digital diagnostic monitoring to read real-time parameters?

A: No, this RJ45 transceiver does not support DDM/DOM monitoring functions. Unlike optical transceivers, this RJ45 copper SFP transceiver does not include optical power monitoring. You can check link status directly from the switch management page after installing HYTOPTODEVICE RJ45 transceiver.

Q9: What is the difference between this triple-speed RJ45 transceiver and fixed 1000BASE-T only RJ45 transceiver?

A: This RJ45 transceiver supports 10/100/100 auto negotiation, while fixed 1000BASE-T copper SFP transceiver only runs gigabit speed. HYTOPTODEVICE Cisco GLC-TA compatible RJ45 transceiver fits mixed-speed legacy networks, where many end devices only support 100Mbps Fast Ethernet.

Q10: Can I hot swap this RJ45 transceiver while the Cisco switch remains powered and online?

A: Yes, this RJ45 transceiver supports hot swap as defined by SFP MSA. You can insert or remove HYTOPTODEVICE RJ45 transceiver without powering down the host switch. Still, avoid frequent repeated hot-plug operations to reduce mechanical wear of the SFP connector.

Q11: Will ceiling plenum temperature and humidity fluctuations degrade links running on this RJ45 transceiver?

A: Within rated 0~70°C operating range, this RJ45 transceiver maintains stable links. Extreme high humidity and temperature swings will degrade copper cable performance rather than the module itself. Use plenum-rated Cat5e/Cat6 cables and keep adequate ventilation for HYTOPTODEVICE RJ45 transceiver deployments inside ceiling spaces.

Q12: Does 802.1X port access control function normally on ports fitted with this RJ45 transceiver?

A: Yes, 802.1X authentication works normally with this RJ45 transceiver. The authentication logic runs inside the host switch firmware, and HYTOPTODEVICE RJ45 transceiver simply passes Ethernet frames without interfering security traffic. You can apply port-based network access policies normally.

Q13: What will happen if the power supply fails on a switch populated with this RJ45 transceiver?

A: Without redundant power supply, the whole switch will power off and drop all links using this RJ45 transceiver. Deploy dual power supplies for critical enterprise LAN segments. HYTOPTODEVICE RJ45 transceiver itself does not provide power backup function.

Q14: Can network monitoring tools capture mirrored traffic over links using this RJ45 transceiver?

A: Yes, port mirroring works normally on links equipped with this RJ45 transceiver. The HYTOPTODEVICE RJ45 transceiver forwards mirrored Ethernet packets without modification. Network technicians can connect packet analyzers to monitor traffic for troubleshooting and network audit.

Q15: Can I order custom EEPROM coding for this RJ45 transceiver to match my Cisco host hardware?

A: Yes, HYTOPTODEVICE offers free custom EEPROM programming service for this RJ45 transceiver. We can customize EEPROM data to match Cisco GLC-TA identity to eliminate transceiver warning logs on your target network hardware for bulk orders.


Packaging & Custom OEM Solutions

  • ESD Protection & Fast Shipping: Every module is sealed in an ESD-safe bag and ready for same-day dispatch from stock.

  • Custom OEM & Branding: We provide logo printing, private labeling, and custom packaging to help distributors and integrators build their brand—no factory investment required.

HYTOPTODEVICE 10Gbase-bx bidi transceiver  custom packaging


Why Network Engineers Choose HYTOPTODEVICE


HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.

  • Up to 70% cost savings vs OEM, transparent pricing & flexible bulk rates, supported quality returns
  • 100% real-device compatible with Cisco, Huawei,Dell,Juniper, and Arista
  • ISO 9001:2015 Shenzhen factory, full lineup: 1.25G/10G/25G/40G/100G/200G/400G/800G/1.6T transceivers
  • Ample stock, fast global DHL/FedEx shipping in 3–5 working days
  • Free pre-sales engineering support for custom EEPROM  & private label firmware
  • Real switch test videos available for pre-purchase review; inspection & shipping videos provided per order 


“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia


Quality Certification & Compliance

 At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.

We adhere to rigorous standards for our SFP modules and network solutions:

  • ISO 9001: Certified quality management and production consistency.

  • CE & FCC: Fully compliant for seamless Global Market Access.

  • RoHS: Committed to environmental responsibility and hazardous material control.

  • Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.

Certified Quality. Global Standards. Guaranteed Performance.


hytoptodevice 10g sfp+ bidi transceiver testing certification

Rigorous Industrial Product Testing

   hytoptodevice check device and equiptment for optical transceiver module

100% 3rd Party Compatible
testing device for hytoptodevice 10g sfp+ bidi optical module
Partial Test Demonstration
hytoptodevice testing devices for compatibility of sfp+ bidi 10g optical module


  • Cisco GLC-TA Compatible 10/100/1000BASE-T SFP SGMII Copper 100m RJ-45 Transceiver Module | HYTOPTODEVICE
  • Cisco GLC-TA Compatible 10/100/1000BASE-T SFP SGMII Copper 100m RJ-45 Transceiver Module | HYTOPTODEVICE
  • Cisco GLC-TA Compatible 10/100/1000BASE-T SFP SGMII Copper 100m RJ-45 Transceiver Module | HYTOPTODEVICE
  • Cisco GLC-TA Compatible 10/100/1000BASE-T SFP SGMII Copper 100m RJ-45 Transceiver Module | HYTOPTODEVICE
  • Cisco GLC-TA Compatible 10/100/1000BASE-T SFP SGMII Copper 100m RJ-45 Transceiver Module | HYTOPTODEVICE

Download