| NO. | Brand | Compatible P/N | Transceiver Type |
| 1 | Cisco | GLC-TA | SFP-GE-T |
| 2 | Alcatel-Lucent | iSFP-GIG-T | SFP-GIG-T |
| 3 | Brocade | E1MGTX-A | GLC-TE-I |
| 4 | Extreme | 10065 | SFP-10G-T-30 |
| 5 | Juniper Networks | EX-SFP-1GE-T | SFP-10G-T-30I |
| 6 | MikroTik | S-RJ01 | SFP-10G-T-80 |
| 7 | Ciena | XCVR-B00CRJ | SFP-10G-T-100 |
| 8 | Finisar | FCLF8522P2BTL |
Product Overview
HYTOPTODEVICE Ciena XCVR-B00CRJ compatible copper SFP module delivers flexible triple-speed 10/100/1000BASE-T Ethernet transmission over twisted-pair copper cabling. This hot-swappable SFP copper module with RJ45 connector supports up to 100-meter links over Cat5e/Cat6 cable and uses SGMII host interface for seamless communication with Ciena edge networking platforms. Built to IEEE 802.3 & SFP MSA standards, pre-programmed EEPROM enables plug-and-play recognition under Ciena SAOS without unsupported transceiver warning logs. This copper SFP module supports auto-negotiation for 10Mbps,100Mbps and 1000Mbps speeds. HYTOPTODEVICE manufactures this copper SFP module for network distributors, system integrators and bulk purchasers.
Key Technical Specifications
| Ciena Compatible | XCVR-B00CRJ | Vendor Name | HYTOPTODEVICE |
| Form Factor | SFP | Data Rate | 10/100/1000Mbps |
| Connector | RJ-45 | Cable Distance | 100m |
| Media | Copper | Cable Type | Cat 5e/6/6a (UTP) |
| Max. Power Consumption | ≤1.2W | DDM Support | YES |
| Protocols | MSA Compliant, IEEE STD 802.3 and 802.3ab | Operation Temperature | 0 to 70°C (32 to 158°F) |
Standard: Cat5e or Cat6 twisted-pair cable is required to achieve full 100-meter Gigabit performance.
Note: Standard Cat5 cable may limit link stability at full 1G speed and is not recommended.
Live Insertion: The SFP RJ45 transceiver supports live insertion and removal.
Precaution: Avoid repeated hot swapping under continuous heavy traffic loads to ensure optimal hardware longevity.
Heat Dissipation: This 1Gbps copper module generates mild heat during operation.
Deployment Advice: Verify the switch thermal budget and ensure adequate ventilation before fully populating all SFP ports.
Fixed Rate: This RJ45 transceiver operates at a fixed 1000Mbps speed only.
Compatibility Warning: It cannot auto-negotiate down to 100Mbps or 10Mbps. The connected peer device must support 1G speed to successfully establish a link.
Storage Environment: Keep unused transceivers stored in dry, ESD-safe packaging.
Dust Protection: Always fit dust caps onto the RJ45 port when the module is not in service.
Built on SFP MSA and IEEE industry standards, this RJ45 SFP Transceiver module also works with Fortinet, Dell, Extreme and other mainstream network hardware, suitable for mixed-brand enterprise and campus network renovation projects.



The Core Features



FAQ
Q1: Can this copper SFP module auto negotiate 10M,100M and 1000M speeds for mixed end devices?
A: Yes, this copper SFP module supports 10/100/1000BASE-T auto-negotiation. HYTOPTODEVICE Ciena XCVR-B00CRJ compatible copper SFP module automatically synchronizes speed with connected peer devices over Cat5e/Cat6 cabling, perfect for mixed-speed LAN environments mixing gigabit and fast ethernet hardware at carrier edge sites.
Q2: Does my Ciena edge device need SGMII interface to run this copper SFP module?
A: Yes, host hardware must carry SGMII interface to operate this copper SFP module properly. This Ciena compatible copper SFP module relies on SGMII to transfer signals between device PHY and copper transceiver, it cannot function if SFP port only supports 1000BASE-X without SGMII.
Q3: What cable types can reach full 100m transmission distance with this copper SFP module?
A: Cat5e or Cat6 twisted pair cables are required for full 100m reach of this copper SFP module. HYTOPTODEVICE copper SFP module follows IEEE 802.3 standard, and older Cat5 cable may cause signal attenuation, crosstalk and unstable link when running near maximum distance. Cat6 / Cat6a is recommended: it provides larger margin and superior anti-interference performance, and supports future network upgrades to 2.5G/10G (Cat6 supports 2.5G/5G, Cat6a supports 10G).
Q4: Can this copper SFP module build links between network hardware from different vendors?
A: Yes, this copper SFP module supports multi-brand interoperability based on IEEE and SFP MSA standards. HYTOPTODEVICE Ciena XCVR-B00CRJ compatible copper SFP module can connect cross-brand switches and edge routers as long as both sides equip SGMII SFP ports and support 10/100/1000BASE-T.
Q5: Does this copper SFP module have built-in MDI/MDIX auto crossover capability?
A: Yes, auto MDI/MDIX crossover function is integrated inside this copper SFP module. You can directly use straight-through patch cables without crossover cables for device-to-device or device-to-server connections, simplifying on-site cabling work for installers deploying HYTOPTODEVICE copper SFP module.
Q6: What is the typical power consumption when installing multiple copper SFP module in high-density Ciena edge platforms?
A: Each copper SFP module consumes typical ~1.05W power. Low power design reduces heat accumulation for high-density SFP port arrays. You can easily calculate total power budget when deploying multiple HYTOPTODEVICE copper SFP module filling all available SFP slots.
Q7: Can this copper SFP module connect IP cameras and VoIP phones inside carrier or enterprise local area networks?
A: Yes, this copper SFP module works reliably for IP camera and VoIP phone LAN links. The triple-speed auto-negotiation adapts to 100Mbps for older cameras and 1Gbps for newer devices. HYTOPTODEVICE copper SFP module converts SFP SGMII port to standard RJ45 port to connect these end devices.
Q8: Does this copper SFP module include DDM digital diagnostic monitoring to read real-time operational parameters?
A: No, this copper SFP module does not support DDM/DOM monitoring functions. Unlike optical transceivers, this RJ45 copper SFP module has no optical power monitoring. You can check link status directly on the Ciena device web management page after installing HYTOPTODEVICE copper SFP module.
Q9: What is the difference between this triple-speed copper SFP module and single-speed 1000BASE-T copper SFP module?
A: This copper SFP module supports 10/100/1000 auto negotiation, while fixed 1000BASE-T copper SFP module only runs at gigabit speed. HYTOPTODEVICE Ciena XCVR-B00CRJ compatible copper SFP module is suitable for mixed-speed LAN where many endpoints only support 100Mbps Fast Ethernet.
Q10: Can I hot swap this copper SFP module while the Ciena edge device stays powered and online?
A: Yes, this copper SFP module supports hot swap defined by SFP MSA specification. You can insert or remove HYTOPTODEVICE copper SFP module without powering down the host hardware. Frequent repeated hot-plugging should be avoided to reduce mechanical wear on the SFP connector.
Q11: Will temperature and humidity variations inside ceiling plenum areas affect links using this copper SFP module?
A: Within rated 0~70°C operating range, this copper SFP module maintains stable links. Extreme high humidity and temperature swings mainly degrade copper cable performance rather than the transceiver itself. Use plenum-rated Cat5e/Cat6 cables and maintain adequate ventilation for HYTOPTODEVICE copper SFP module deployments inside ceiling spaces.
Q12: Will 802.1X port-based network access control work normally on ports fitted with this copper SFP module?
A: Yes, 802.1X authentication works normally with this copper SFP module. Authentication logic runs on host Ciena device firmware, and HYTOPTODEVICE copper SFP module only forwards Ethernet frames without interfering security traffic. You can apply port-based network access policies normally.
Q13: What happens if the power supply fails on a Ciena platform populated with this copper SFP module?
A: Without redundant power supply, the whole device will power off and drop all links using this copper SFP module. Deploy dual power supplies for critical carrier and enterprise LAN segments. HYTOPTODEVICE copper SFP module itself does not provide power backup function.
Q14: Can network monitoring tools capture port-mirrored traffic over links equipped with this copper SFP module?
A: Yes, port mirroring functions normally on links fitted with this copper SFP module. The HYTOPTODEVICE copper SFP module forwards mirrored Ethernet packets without modification. Network technicians can connect packet analyzers to monitor traffic for troubleshooting and network audit.
Q15: Can HYTOPTODEVICE customise EEPROM coding of this copper SFP module for my Ciena hardware?
A: Yes, HYTOPTODEVICE provides free custom EEPROM programming service for this copper SFP module. We can customise EEPROM data to match Ciena XCVR-B00CRJ identity and eliminate transceiver warning logs on your target network hardware for bulk orders.
Packaging & Custom OEM Solutions
ESD Protection & Fast Shipping: Every module is sealed in an ESD-safe bag and ready for same-day dispatch from stock.
Custom OEM & Branding: We provide logo printing, private labeling, and custom packaging to help distributors and integrators build their brand—no factory investment required.

Why Network Engineers Choose HYTOPTODEVICE
HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia
Quality Certification & Compliance
At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.
We adhere to rigorous standards for our SFP modules and network solutions:
ISO 9001: Certified quality management and production consistency.
CE & FCC: Fully compliant for seamless Global Market Access.
RoHS: Committed to environmental responsibility and hazardous material control.
Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.
Certified Quality. Global Standards. Guaranteed Performance.




