| NO. | Brand | Compatible P/N | Transceiver Type |
| 1 | Cisco | SFP-1G-SX | SFP-G31-10LD |
| 2 | Arista Networks | SFP-1G-SX | SFP-G31-40LD |
| 3 | Huawei | eSFP-GE-SX-MM850 | SFP-G55-80LD |
| 4 | Juniper | EX-SFP-1GE-SX | SFP-G55-100LD |
| 5 | Brocade | E1MG-SX-OM | SFP-G55-160LD |
| Arista Networks Compatible | SFP-1G-SX | Vendor Name | HYTOPTODEVICE |
| Form Factor | SFP | Max Data Rate | 1.25Gbps |
| Wavelength | 850nm | Max Distance | 550m over OM2 MMF |
| Connector | Duplex LC | Transmitter Type | 850nm VCSEL |
| Cable Type | MMF | Receiver Type | PIN |
| TX Power | -9.0~-3dBm | Receiver Sensitivity | < -18.0dBm |
| Typical Power Consumption | ≤0.8W | Receiver Overload | -3dBm |
| Bit Error Ratio (BER) | 1E-12 | DDM/DOM | Supported |
| Protocols | SFF-8472 MSA Compliant, IEEE 802.3ah-2004 | Operation Temperature | 0°C to 70°C (32 to 158°F) |
Usage Guidelines & Best Practices
Fiber Choice: Duplex LC OM1/OM2/OM3/OM4 MMF (50 or 62.5/125 µm). Do NOT use SMF (OS1/OS2).
Connector Match: UPC/PC polish only. Do NOT use APC.
Cleanliness & Dust: Keep dust caps on whenever unattached. Clean fiber end-faces with a optical cleaning pen before insertion; dust causes over 80% of optical link failures.
Link Setup:Lock speed to 1.25Gbps (Full Duplex) manually if auto-negotiation fails.
Handling: Wear ESD protection. Keep fiber bend radius ≥ 30 mm.
Installation & Hot-Swap Rules:MSA hot-swappable. Insert/remove gently without powering down.
Environment:Commercial grade (0°C to 70°C). Avoid extreme heat, moisture, and dust.
Links to the Datasheet, User Guide and Compatibility Guides are available on the product page.
Full Compatibility List and Supported Devices
1. Supported Hardware & Firmware
Arista 7010T Series: DCS-7010T-48, DCS-7010T-48-DC
Arista 7050X & 7050X3 Series: DCS-7050SX3-48YC12, DCS-7050TX3-48C8, DCS-7050QX-32S (ports set to native 1G rate)
Arista 7150S Series: DCS-7150S-24, DCS-7150S-52, DCS-7150S-64
Arista 720XP Series (Campus Edge): DCS-720XP-48Y6, DCS-720XP-24ZY4, DCS-720XP-48ZC2
Arista 7280R & 7280R3 Series: DCS-7280SR-48C6, DCS-7280QR-C36
Main Application Scenarios
Intra-Rack & Row Cross-Connects: Linking top-of-rack (ToR) and leaf switches directly to servers and storage controllers inside Arista-driven enterprise data centers.
Corporate Campus Local LANs: Bridging distribution layers to core switching matrixes across different rooms or floors within a single multi-story corporate building.
Storage Area Networks (SAN): Interconnecting high-speed network attached storage arrays (NAS) or storage fabric environments via local multi-mode patch links.
High-Speed Uplink Paths: Deploying multi-mode optical fiber trunk paths to aggregate traffic from access-layer switches back up to a centralized core engine.







Q1: What is the maximum distance supported by the Arista SFP-1G-SX compatible module?
A: It supports up to 220m over legacy OM1 (62.5/125µm) fiber, up to 550m over standard OM2 (50/125µm) fiber, and up to 1km over optimized OM3/OM4 laser-optimized multi-mode fiber.
Q2: Do I need to use an optical attenuator with this short-range module?
A: No, you do not need an attenuator. The output power is intentionally mapped for short distances and will not saturate or damage the receiver.
Q3: Can I use single-mode fiber (SMF) patch cords with an Arista SFP-1G-SX?
A: No, this module will not work over single-mode fiber. The laser core size and wavelengths do not align, resulting in immediate link-down errors.
Q4: What wavelength does the Arista SFP-1G-SX operate on?
A: It operates on a short-wave 850nm infrared light spectrum.
Q5: Can I use this transceiver with Single-Mode Fiber (SMF) patch cables?
A: No, it is designed exclusively for Multi-Mode Fiber (MMF). Using single-mode fiber will cause massive light loss and the link will stay down.
Q6: Is the Arista SFP-1G-SX hot-swappable?
A: Yes, it is fully hot-pluggable. You can insert or extract the module without taking down the host hardware switch.
Q7: Will this 1.25G SX SFP work with my switch? A: HYTOPTODEVICE Arista‑compatible 100BASE‑SX SFP works with your switch, as long as it is coded with the correct vendor EEPROM firmware (Cisco, HP, Ubiquiti, etc.). We support custom EEPROM programming for different brand switch hardware.
Q8: Can I plug a 1.25G SFP into a 10G SFP+ port? A: Yes, provided the 10G port supports dual speeds and is manually forced to 1G. HYTOPTODEVICE Arista SFP‑1G‑SX compatible SFP supports this mode on multi‑rate Arista and third‑party switch platforms.
Q9: Is this module MSA compliant? A: Yes. HYTOPTODEVICE Arista Networks SFP‑1G‑SX compatible transceiver strictly adheres to SFF‑8472 and SFP Multi‑Source Agreement standards for broad‑industry interoperability.
Q10: Can I use an 850nm SX module with Single‑Mode Fiber (SMF)? A: No. SX optics require Multimode Fiber (MMF). Use an LX module (1310nm) for SMF. HYTOPTODEVICE offers matching LX SFP parts for single‑mode gigabit links.
Q11: Will OM3 or OM4 fiber extend the range past 550 meters? A: No. The 850nm SX standard caps link distance at 550m regardless of fiber grade. HYTOPTODEVICE Arista‑compatible 1000BASE‑SX SFP follows IEEE 802.3z distance limits.
Q12: Does it support DDM / DOM (Digital Diagnostics Monitoring)? A: Yes, allowing real‑time monitoring of temperature, voltage, TX power, and RX power. HYTOPTODEVICE Arista SFP‑1G‑SX SFP exposes DDM data via switch CLI and SNMP.
Q13: What is the typical optical transmit (TX) power? A: Range is typically between -9.5 dBm and -3 dBm. HYTOPTODEVICE Arista‑compatible 1000BASE‑SX SFP is factory‑calibrated within this power window.
Q14: What if DDM reports RX power below -17 dBm? A: Clean LC connectors, check for fiber damage, and ensure bend radius limits aren't exceeded. HYTOPTODEVICE technical support assists troubleshooting low‑RX‑power issues for bulk orders.
Q15: Does TX/RX polarity matter on fiber patch cords? A: Yes. TX on Module A must connect to RX on Module B, and vice versa. Reverse polarity will result in no link for HYTOPTODEVICE Arista SFP‑1G‑SX compatible transceivers.
Packaging Options & Custom‑Packaging Solutions
Every transceiver module gets reliable ESD‑safe packaging out of the box. Standard packing is ready for immediate shipment, while custom‑printed packaging with your logo is available for bulk orders.
Why Network Engineers Choose HYTOPTODEVICE
HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
"We replaced 200 Cisco-branded SFPs with HYTOPTODEVICE equivalents across our spine layer — zero compatibility issues, 40% cost reduction."— Network Architect, Tier-2 ISP, Germany
Quality Certification & Compliance
At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final inspection, our processes ensure global compliance and reliability.
We adhere to rigorous standards for our SFP modules and network solutions:
ISO 9001: Certified quality management and production consistency.
CE & FCC: Fully compliant for seamless Global Market Access.
RoHS: Committed to environmental responsibility and hazardous material control.
Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.
Certified Quality. Global Standards. Guaranteed Performance.






